Kernel locked at "Now booting the kernel", Xilinx ML310 PPC405GP

Kernel locked at "Now booting the kernel", Xilinx ML310 PPC405GP

[Kunal Arya]

I'm currently working on getting Linux running on the Xilinx ML310.
I've followed all of the directions so far, but have run into a boot
problem.

I used the kernel sources from Montavista's RSYNC servers, using this command:
rsync -avz source.mvista.com::linuxppc-2.4 .

This appears to be kernel version 2.4.30-pre1, according to version.h

The kernel compiled fine after several modifications. I had to make 3
major changes:
 * The version of GCC I was using (4.1.1) no longer allows lvalue
typecasts (e.g. (const char*)x = y). I simply removed the typecasts,
assuming they've been enforced already.
 * I had to modify embed_config.h so that the #include for xiic_l.h
was before the XIic_Recv and XIic_Send calls
 * There were several error messages about extern functions. Googling
around, I discovered that I could easily remove them or change them to
static or local functions.

Board:
 * Xilinx ML310, running the Virtex-II Pro
 * PowerPC 405GP core

On the Xilinx tools side:
 * EDK 8.2.02i
 * Using the Xilinx-provided ml310_pci_design project

Steps I took to compile the kernel:
 * Latest 2.4 kernel from mvista.com via rsync
 * Copied the BSP generated in XPS
 * Copied the appropriate xparameters_ml300.h file to my linux root tree
 * Compiled it both with and without initrd; neither works

I used crosstool with gcc 4.1.1 w/glibc 2.3.6. My xparameters_ml300.h
and .config files are pasted below.

The problem:
The kernel panics after printing out the message "Now booting the
kernel" The exact output is this:

loaded at:     00400000 0089C1E4
board data at: 00000000 00000018
relocated to:  00405238 00405250
zimage at:     00405BD3 004AFDF5
initrd at:     004B0000 00898382
avail ram:     0089D000 55555555

Linux/PPC load: root=/dev/ram
Uncompressing Linux...done.
Now booting the kernel

Symptoms: I (painstakingly) manually reconstructed the link register
stack, and I found out that:
panic called from do_exit @ 0xc0016218
do_exit called from (0xc0003d5c), in function die (0xc0003d00)
die called from (0xc000e88c), in function bad_page_fault (0xc000e83c)
bad_page_fault called from (0xc000e984), in function do_page_fault (0xc000e8a4)
do_page_fault called from (0xc0003a84), in function ?? (interrupt maybe?)

I was unable to set a hardware breakpoint on the exception handler, so
I couldn't find out where exactly the offending command was. It seems
that the PPC is triggering its page fault exception handler because
it's trying to access memory it shouldn't/can't.

Thanks a lot, and let me know if there's more information that could
be helpful. Sorry for the horrendously huge message.
-- Kunal Arya

-----------------------------------------------
Contents of xparameters_ml300.h (comments trimmed, PS2 omitted):

#define XPAR_XPLBARB_NUM_INSTANCES 1
#define XPAR_PLB_V34_0_BASEADDR 0x00000000
#define XPAR_PLB_V34_0_HIGHADDR 0x00000000
#define XPAR_PLB_V34_0_DEVICE_ID 0
#define XPAR_PLB_V34_0_PLB_NUM_MASTERS 3
#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF8000
#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
#define XPAR_XPCI_NUM_INSTANCES 1
#define XPAR_OPB_PCI_1_DEVICE_ID 0X0300
#define XPAR_OPB_PCI_1_BASEADDR 0x3C000000
#define XPAR_OPB_PCI_1_HIGHADDR 0x3C0001FF
#define XPAR_OPB_PCI_1_PCIBAR_0 0X00000000
#define XPAR_OPB_PCI_1_PCIBAR_LEN_0 27
#define XPAR_OPB_PCI_1_PCIBAR2IPIF_0 0X00000000
#define XPAR_OPB_PCI_1_PCIBAR_ENDIAN_TRANSLATE_EN_0 0
#define XPAR_OPB_PCI_1_PCI_PREFETCH_0 1
#define XPAR_OPB_PCI_1_PCI_SPACETYPE_0 1
#define XPAR_OPB_PCI_1_PCIBAR_1 0xFFFFFFFF
#define XPAR_OPB_PCI_1_PCIBAR_LEN_1 20
#define XPAR_OPB_PCI_1_PCIBAR2IPIF_1 0x00000000
#define XPAR_OPB_PCI_1_PCIBAR_ENDIAN_TRANSLATE_EN_1 0
#define XPAR_OPB_PCI_1_PCI_PREFETCH_1 1
#define XPAR_OPB_PCI_1_PCI_SPACETYPE_1 1
#define XPAR_OPB_PCI_1_PCIBAR_2 0xFFFFFFFF
#define XPAR_OPB_PCI_1_PCIBAR_LEN_2 20
#define XPAR_OPB_PCI_1_PCIBAR2IPIF_2 0x00000000
#define XPAR_OPB_PCI_1_PCIBAR_ENDIAN_TRANSLATE_EN_2 0
#define XPAR_OPB_PCI_1_PCI_PREFETCH_2 1
#define XPAR_OPB_PCI_1_PCI_SPACETYPE_2 1
#define XPAR_OPB_PCI_1_IPIFBAR_0 0X20000000
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_0 0X2FFFFFFF
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_0 0X00000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_0 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_0 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_0 1
#define XPAR_OPB_PCI_1_IPIFBAR_1 0X30000000
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_1 0X37FFFFFF
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_1 0X00000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_1 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_1 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_1 1
#define XPAR_OPB_PCI_1_IPIFBAR_2 0X38000000
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_2 0X3BFFFFFF
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_2 0XC8000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_2 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_2 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_2 0
#define XPAR_OPB_PCI_1_IPIFBAR_3 0X3E000000
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_3 0X3E000FFF
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_3 0X32000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_3 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_3 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_3 1
#define XPAR_OPB_PCI_1_IPIFBAR_4 0xFFFFFFFF
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_4 0x00000000
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_4 0x00000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_4 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_4 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_4 1
#define XPAR_OPB_PCI_1_IPIFBAR_5 0xFFFFFFFF
#define XPAR_OPB_PCI_1_IPIF_HIGHADDR_5 0x00000000
#define XPAR_OPB_PCI_1_IPIFBAR2PCI_5 0x00000000
#define XPAR_OPB_PCI_1_IPIFBAR_ENDIAN_TRANSLATE_EN_5 0
#define XPAR_OPB_PCI_1_IPIF_PREFETCH_5 1
#define XPAR_OPB_PCI_1_IPIF_SPACETYPE_5 1
#define XPAR_OPB_PCI_1_DMA_BASEADDR 0x3D000000
#define XPAR_OPB_PCI_1_DMA_HIGHADDR 0x3D00007F
#define XPAR_OPB_PCI_1_DMA_CHAN_TYPE 0
#define XPAR_OPB_PCI_1_DMA_LENGTH_WIDTH 13
#define XPAR_OPB_PCI_1_BRIDGE_IDSEL_ADDR_BIT 24
#define XPAR_XIIC_NUM_INSTANCES 1
#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
#define XPAR_OPB_IIC_0_DEVICE_ID 0
#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
#define XPAR_OPB_IIC_0_GPO_WIDTH 1
#define XPAR_XUARTNS550_NUM_INSTANCES 1
#define XPAR_XUARTNS550_CLOCK_HZ 100000000
#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
#define XPAR_OPB_UART16550_0_DEVICE_ID 0
#define XPAR_XSPI_NUM_INSTANCES 1
#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
#define XPAR_OPB_SPI_0_DEVICE_ID 0
#define XPAR_OPB_SPI_0_FIFO_EXIST 1
#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
#define XPAR_XGPIO_NUM_INSTANCES 1
#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
#define XPAR_OPB_GPIO_0_DEVICE_ID 0
#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
#define XPAR_OPB_GPIO_0_IS_DUAL 0
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 8
#define XPAR_XINTC_HAS_IPR 1
#define XPAR_XINTC_USE_DCR 0
#define XPAR_XINTC_NUM_INSTANCES 1
#define XPAR_OPB_INTC_0_BASEADDR 0xD0000FC0
#define XPAR_OPB_INTC_0_HIGHADDR 0xD0000FDF
#define XPAR_OPB_INTC_0_DEVICE_ID 0
#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
#define XPAR_INTC_SINGLE_BASEADDR 0xD0000FC0
#define XPAR_INTC_SINGLE_HIGHADDR 0xD0000FDF
#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
#define XPAR_MISC_LOGIC_0_PCI_INT_OR_MASK 0X000001
#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PCI_INT_OR_INTR 0
#define XPAR_OPB_PCI_1_IP2INTC_IRPT_MASK 0X000002
#define XPAR_OPB_INTC_0_OPB_PCI_1_IP2INTC_IRPT_INTR 1
#define XPAR_OPB_SPI_0_IP2INTC_IRPT_MASK 0X000004
#define XPAR_OPB_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 2
#define XPAR_MISC_LOGIC_0_IIC_TEMP_CRIT_MASK 0X000008
#define XPAR_OPB_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 3
#define XPAR_MISC_LOGIC_0_IIC_IRQ_MASK 0X000010
#define XPAR_OPB_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 4
#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000020
#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 5
#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000040
#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 6
#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000080
#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 7
#define XPAR_XSYSACE_MEM_WIDTH 8
#define XPAR_XSYSACE_NUM_INSTANCES 1
#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR
#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR
#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
#define XPAR_INTC_0_PCI_0_VEC_ID_A XPAR_OPB_INTC_0_MISC_LOGIC_0_PCI_INT_OR_INTR
#define XPAR_INTC_0_PCI_0_VEC_ID_B XPAR_OPB_INTC_0_MISC_LOGIC_0_PCI_INT_OR_INTR
#define XPAR_INTC_0_PCI_0_VEC_ID_C XPAR_OPB_INTC_0_MISC_LOGIC_0_PCI_INT_OR_INTR
#define XPAR_INTC_0_PCI_0_VEC_ID_D XPAR_OPB_INTC_0_MISC_LOGIC_0_PCI_INT_OR_INTR
#define XPAR_INTC_0_SPI_0_VEC_ID XPAR_OPB_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR
#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
#define XPAR_INTC_0_UARTNS550_0_VEC_ID
XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
#define XPAR_SPI_0_BASEADDR XPAR_OPB_SPI_0_BASEADDR
#define XPAR_SPI_0_HIGHADDR XPAR_OPB_SPI_0_HIGHADDR
#define XPAR_SPI_0_DEVICE_ID XPAR_OPB_SPI_0_DEVICE_ID
#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR
#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR
#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID
#define XPAR_XPCI_CLOCK_HZ 33333333
#define XPAR_OPB_PCI_1_CONFIG_ADDR 0X3C000000+0x10c
#define XPAR_OPB_PCI_1_CONFIG_DATA 0X3C000000+0x110
#define XPAR_OPB_PCI_1_LCONFIG_ADDR 0X3C000000
#define XPAR_OPB_PCI_1_MEM_BASEADDR 0X20000000
#define XPAR_OPB_PCI_1_MEM_HIGHADDR 0X37FFFFFF
#define XPAR_OPB_PCI_1_IO_BASEADDR 0X38000000
#define XPAR_OPB_PCI_1_IO_HIGHADDR 0X3BFFFFFF
#define XPAR_PCI_0_BASEADDR XPAR_OPB_PCI_1_BASEADDR
#define XPAR_PCI_0_HIGHADDR XPAR_OPB_PCI_1_HIGHADDR
#define XPAR_PCI_0_CONFIG_ADDR XPAR_OPB_PCI_1_CONFIG_ADDR
#define XPAR_PCI_0_CONFIG_DATA XPAR_OPB_PCI_1_CONFIG_DATA
#define XPAR_PCI_0_LCONFIG_ADDR XPAR_OPB_PCI_1_LCONFIG_ADDR
#define XPAR_PCI_0_MEM_BASEADDR XPAR_OPB_PCI_1_MEM_BASEADDR
#define XPAR_PCI_0_MEM_HIGHADDR XPAR_OPB_PCI_1_MEM_HIGHADDR
#define XPAR_PCI_0_IO_BASEADDR XPAR_OPB_PCI_1_IO_BASEADDR
#define XPAR_PCI_0_IO_HIGHADDR XPAR_OPB_PCI_1_IO_HIGHADDR
#define XPAR_PCI_0_CLOCK_FREQ_HZ XPAR_XPCI_CLOCK_HZ
#define XPAR_PCI_0_DEVICE_ID XPAR_OPB_PCI_1_DEVICE_ID
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
#define XPAR_DDR_0_SIZE 0x08000000
#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
#define XPAR_POWER_0_POWERDOWN_BASEADDR 0x90000004
#define XPAR_POWER_0_POWERDOWN_HIGHADDR 0x90000007
#define XPAR_POWER_0_POWERDOWN_VALUE 0xFF

----------------------------------------------
Contents of .config (trimmed down to show only what's explicitly set):
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EXPERIMENTAL=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_40x=y
CONFIG_4xx=y
CONFIG_XILINX_ML300=y
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_UART0_TTYS0=y
CONFIG_VIRTEX_II_PRO=y
CONFIG_EMBEDDEDBOOT=y
CONFIG_XILINX_OCP=y
CONFIG_PPC_OCP=y
CONFIG_GEN550=y
CONFIG_405=y
CONFIG_IBM405D5XN_TLB_BUG=y
CONFIG_IBM405_ERR51=y
CONFIG_IBM405_ERR77=y
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_SYSCTL=y
CONFIG_SYSVIPC=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_XILINX_SYSACE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_I2C=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PROC=y
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_X1226_RTC=y
CONFIG_XILINX_GPIO=y
CONFIG_XILINX_SPI=y
CONFIG_AUTOFS4_FS=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_CRAMFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_XFS_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LOG_BUF_SHIFT=14

Re: Kernel locked at "Now booting the kernel", Xilinx ML310 PPC405GP

[Grant Likely]

On 3/9/07, Kunal Arya <kunalarya@gmail.com> wrote:
> I'm currently working on getting Linux running on the Xilinx ML310.
> I've followed all of the directions so far, but have run into a boot
> problem.
>
> I used the kernel sources from Montavista's RSYNC servers, using this command:
> rsync -avz source.mvista.com::linuxppc-2.4 .
>
> This appears to be kernel version 2.4.30-pre1, according to version.h

Oh, ick.  you might want to try 2.6.  2.4 is so crusty (but I do have
2.4 working on my virtex boards, so it's not unusable).  :-)

What's probably happening, is some code is trying to access device
registers after the MMU is turned on, but before ioremap is called on
the registers.  I've had this situation before.  I usually just trace
through the boot path to find out how far it gets before the trap so I
know which device driver is at fault.

If you can access memory, it's also useful to look at the contents of
__log_buf after the crash.  That will tell you approximately how far
boot proceeded.

Cheers,
g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195

Re: Kernel locked at "Now booting the kernel", Xilinx ML310 PPC405GP

[Mike Dyer]

Hi Kunal,

Apologies if I post this twice - our mail server is unreliable atm...
> <snip>
> I used crosstool with gcc 4.1.1 w/glibc 2.3.6. My xparameters_ml300.h
> and .config files are pasted below.
>
> The problem:
> The kernel panics after printing out the message "Now booting the
> kernel" The exact output is this:
>
> loaded at:     00400000 0089C1E4
> board data at: 00000000 00000018
> relocated to:  00405238 00405250
> zimage at:     00405BD3 004AFDF5
> initrd at:     004B0000 00898382
> avail ram:     0089D000 55555555
>
> Linux/PPC load: root=/dev/ram
> Uncompressing Linux...done.
> Now booting the kernel
>
>
>   
I had the exact same problem for a different board, using the PPC in a 
Virtex 4 FX12, using the 2.6 kernel.  I fixed this by rolling the 
compiler back to version 4.0.2.  Didn't do a lot of thinking about why 
it worked, but I think it has something to do with the linker and your 
board data (it randomly changed location every time I tried to boot).  I 
believe it should be in the 0x00400000 range as well (not 0x00 as it is 
in your capture).

As a side note: Are there any known issues using GCC 4.1.1?

Cheers,
Mike

Re: Kernel locked at "Now booting the kernel", Xilinx ML310 PPC405GP

[Kunal Arya]

It looks like it was a linker problem. I rolled back to GCC 4.0.2, and
it got past the initial kernel panic.

It's now panicking on a PCI transaction, but at least it gets to the
kernel's main code.

I'm avoiding the 2.6 kernel because it lacks Xilinx IP driver support
(at least on a production level).

On 3/12/07, Mike Dyer <michaelidyer@gmail.com> wrote:
> Hi Kunal,
>
> Apologies if I post this twice - our mail server is unreliable atm...
> > <snip>
> > I used crosstool with gcc 4.1.1 w/glibc 2.3.6. My xparameters_ml300.h
> > and .config files are pasted below.
> >
> > The problem:
> > The kernel panics after printing out the message "Now booting the
> > kernel" The exact output is this:
> >
> > loaded at:     00400000 0089C1E4
> > board data at: 00000000 00000018
> > relocated to:  00405238 00405250
> > zimage at:     00405BD3 004AFDF5
> > initrd at:     004B0000 00898382
> > avail ram:     0089D000 55555555
> >
> > Linux/PPC load: root=/dev/ram
> > Uncompressing Linux...done.
> > Now booting the kernel
> >
> >
> >
> I had the exact same problem for a different board, using the PPC in a
> Virtex 4 FX12, using the 2.6 kernel.  I fixed this by rolling the
> compiler back to version 4.0.2.  Didn't do a lot of thinking about why
> it worked, but I think it has something to do with the linker and your
> board data (it randomly changed location every time I tried to boot).  I
> believe it should be in the 0x00400000 range as well (not 0x00 as it is
> in your capture).
>
> As a side note: Are there any known issues using GCC 4.1.1?
>
> Cheers,
> Mike
>
>
>