* ML40X, ppc 405 crash
@ 2006-08-21 21:34 Wade Maxfield
2006-08-22 10:52 ` alva
0 siblings, 1 reply; 4+ messages in thread
From: Wade Maxfield @ 2006-08-21 21:34 UTC (permalink / raw)
To: ppc
[-- Attachment #1: Type: text/plain, Size: 6490 bytes --]
I was running NFS on ML40X. I did a "updatedb" and then immediately,
"locate fixdep"
I got the following crash
root@ml403:/home/moduletest# updatedb
locate fixdep
eth0: Could not transmit buffer.
eth0: Could not transmit buffer.
eth0: Could not transmit buffer.
Oops: kernel access of bad area, sig: 11 [#1]
PREEMPT
NIP: C01D0F74 LR: C01D0910 SP: C28B1930 REGS: c28b1880 TRAP: 0300 Not
tainted
MSR: 00029030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000004, DSISR: 00800000
TASK = c0b034c0[5097] 'frcode' THREAD: c28b0000
Last syscall: 234
GPR00: 00000000 C28B1930 C0B034C0 C35E3200 C03CC380 C276E810 000005E8
C3CE8880
GPR08: 00000002 00000000 C3CE890C 00000000 33003599 10018E04 100C3208
C02DCE08
GPR16: C00DB1CC C02DCE08 00000002 0000000A C28B1DF8 C02E0000 C02A0000
C3A30940
GPR24: 00000000 00000000 00000000 C3A30940 00000000 C35E3200 C3CE8880
C03A8800
NIP [c01d0f74] pfifo_fast_dequeue+0x40/0x74
LR [c01d0910] qdisc_restart+0x30/0x2b4
Call trace:
[c01c1e94] dev_queue_xmit+0x264/0x318
[c01dd8dc] ip_finish_output+0x140/0x2cc
[c01dddb0] ip_queue_xmit+0x348/0x53c
[c01ef628] tcp_transmit_skb+0x324/0x7f8
[c01f05fc] tcp_write_xmit+0x14c/0x31c
[c01ed360] __tcp_data_snd_check+0xc8/0xfc
[c01ed9a4] tcp_rcv_established+0x2c0/0x8ac
[c01f7250] tcp_v4_do_rcv+0x184/0x374
[c01f7d9c] tcp_v4_rcv+0x95c/0xa4c
[c01da000] ip_local_deliver+0x120/0x298
[c01da86c] ip_rcv+0x400/0x508
[c01c2614] netif_receive_skb+0x24c/0x2fc
[c01c276c] process_backlog+0xa8/0x1a0
[c01c2908] net_rx_action+0xa4/0x1cc
[c001bef4] ___do_softirq+0x7c/0x114
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Rebooting in 180 seconds..
-----------------------------------------------------------------------------------------------------------------------------------------------------
Here is the kernel build and boot information. (I use the demo compact
flash disk image shipped with the ml403 as an intermediate. I've not yet
been able to get a small enough build to fit on 412 meg using your tools.)
Linux version 2.6.10_mvl401-ml40x (root@localhost.localdomain) (gcc version
3.4.3 (MontaV
ista 3.4.3-25.0.107.0601076 2006-07-21)) #1 Fri Aug 18 14:43:45 CDT 2006
Xilinx ML40x Reference System (Virtex-4 FX)
Port by MontaVista Software, Inc. (source@mvista.com)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 ip=on root=/dev/xsysace2 rw
Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0
PID hash table entries: 512 (order: 9, 8192 bytes)
hr_time_init: arch_to_nsec = 6990506, nsec_to_arch = 1288490158
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61824k available (2244k kernel code, 640k data, 140k init, 0k
highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
Registering platform device 'xilinx_emac.0'. Parent at platform
Registering platform device 'xilinx_fb.0'. Parent at platform
Registering platform device 'xilinx_sysace.0'. Parent at platform
Registering platform device 'xilinx_iic.0'. Parent at platform
Registering platform device 'xilinx_gpio.0'. Parent at platform
Registering platform device 'xilinx_gpio.1'. Parent at platform
Registering platform device 'xilinx_gpio.2'. Parent at platform
Registering platform device 'xilinx_ps2.0'. Parent at platform
Registering platform device 'xilinx_ps2.1'. Parent at platform
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Console: switching to colour frame buffer device 80x30
xgpio #0 at 0x90000000 mapped to 0xC505C000
xgpio #1 at 0x90001000 mapped to 0xC505E000
xgpio #2 at 0x90002000 mapped to 0xC5060000
xilinx_ps2 #0 at 0xA9000000 mapped to 0xC5062000
xilinx_ps2 #1 at 0xA9001000 mapped to 0xC5064000
Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ sharing disabled
Registering platform device 'serial8250'. Parent at platform
ttyS0 at MMIO 0x0 (irq = 9) is a 16450
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
elevator: using anticipatory as default io scheduler
System ACE at 0xCF000000 mapped to 0xC5066000, irq=3, 500472KB
xsysace: xsysace1 xsysace2
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
xemac 0: using fifo mode.
eth0: Xilinx EMAC #0 at 0x60000000 mapped to 0xC5068000, irq=0
i2c /dev entries driver
xilinx_iic.0 #0 at 0xA8000000 mapped to 0xC506E000, irq=6
mice: PS/2 mouse device common for all mice
atkbd.c: keyboard reset failed on xilinxps2/serio0
atkbd.c: keyboard reset failed on xilinxps2/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 0.0.0.0, my address is 172.17.6.49
IP-Config: Complete:
device=eth0, addr=172.17.6.49, mask=255.255.254.0, gw=172.17.7.254,
host=172.17.6.49, domain=precisiondrilling.com, nis-domain=(none),
bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 140k init
INIT: version 2.78 booting
Activating swap...
Checking all file systems...
fsck 1.27 (8-Mar-2002)
Calculating module dependencies... depmod: QM_MODULES: Function not
implemented
done.
Loading modules:
modprobe: QM_MODULES: Function not implemented
Mounting local filesystems...
nothing was mounted
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Starting portmap daemon: portmap.
Starting dhcpcd on eth0
Running ntpdate to synchronize clock.
Cleaning: /tmp /var/lock /var/rundhcpcd[775]: dhcpConfig: ioctl SIOCADDRT:
File exists
.
INIT: Entering runlevel: 3
Starting kernel log daemon: klogd.
Starting system log daemon: syslogd.
Hostname: ml403.
Creating barrier for shutdown
Starting X11 session for user 'linux'
Welcome to the ML403 Evaluation Board
(C) 2004 Xilinx, Inc - Systems Engineering Group
[-- Attachment #2: Type: text/html, Size: 7617 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* ML40x, ppc 405 crash
@ 2006-08-21 22:20 Wade Maxfield
0 siblings, 0 replies; 4+ messages in thread
From: Wade Maxfield @ 2006-08-21 22:20 UTC (permalink / raw)
To: ppc
[-- Attachment #1: Type: text/plain, Size: 2067 bytes --]
I was trying to fix the problem with fixdep not being executable. I was
on the ml403, and have the kernel directory copied into /usr/src/linux and
/usr/src/linux-2.6.10_mvl401:
bash-2.05b# date
Thu Jan 1 00:28:20 UTC 1970
bash-2.05b# date --set "17:11 Aug 21,2006"
Mon Aug 21 17:11:00 UTC 2006
bash-2.05b# date
Mon Aug 21 17:11:03 UTC 2006
bash-2.05b# make clean
CLEAN drivers/char
CLEAN drivers/video/logo
CLEAN init
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN include/asm-ppc/offsets.h
arch/ppc/kernel/asm-offsets.s.tmp_gas_check vmlinux
System.map
bash-2.05b# make config
HOSTCC scripts/basic/fixdep
eth0: Could not transmit buffer.
eth0: Could not transmit buffer.
Oops: kernel access of bad area, sig: 11 [#1]
PREEMPT
NIP: C01D0F74 LR: C01D0910 SP: C02ABAE0 REGS: c02aba30 TRAP: 0300 Not
tainted
MSR: 00029030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000004, DSISR: 00800000
TASK = c0274710[0] 'swapper' THREAD: c02aa000
Last syscall: 120
GPR00: 00000000 C02ABAE0 C0274710 C3679BC0 C03CC380 C33D6010 000005E8
C3CE8880
GPR08: 00000002 00000000 C3CE890C 00000000 33003099 10018E04 100C3248
C02DCE08
GPR16: C00DB1CC C02DCE08 00000002 00000004 FFFFFFFF C02E0000 C02A0000
C3AEC540
GPR24: 00000000 00000000 00000000 C3AEC540 00000000 C3679BC0 C3CE8880
C03A8800
NIP [c01d0f74] pfifo_fast_dequeue+0x40/0x74
LR [c01d0910] qdisc_restart+0x30/0x2b4
Call trace:
[c01c1e94] dev_queue_xmit+0x264/0x318
[c01dd8dc] ip_finish_output+0x140/0x2cc
[c01dddb0] ip_queue_xmit+0x348/0x53c
[c01ef628] tcp_transmit_skb+0x324/0x7f8
[c01f05fc] tcp_write_xmit+0x14c/0x31c
[c01ed360] __tcp_data_snd_check+0xc8/0xfc
[c01ed9a4] tcp_rcv_established+0x2c0/0x8ac
[c01f7250] tcp_v4_do_rcv+0x184/0x374
[c01f7d9c] tcp_v4_rcv+0x95c/0xa4c
[c01da000] ip_local_deliver+0x120/0x298
[c01da86c] ip_rcv+0x400/0x508
[c01c2614] netif_receive_skb+0x24c/0x2fc
[c01c276c] process_backlog+0xa8/0x1a0
[c01c2908] net_rx_action+0xa4/0x1cc
[c001bef4] ___do_softirq+0x7c/0x114
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Rebooting in 180 seconds..
[-- Attachment #2: Type: text/html, Size: 2479 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: ML40X, ppc 405 crash
2006-08-21 21:34 ML40X, ppc 405 crash Wade Maxfield
@ 2006-08-22 10:52 ` alva
2006-08-22 14:51 ` Wade Maxfield
0 siblings, 1 reply; 4+ messages in thread
From: alva @ 2006-08-22 10:52 UTC (permalink / raw)
To: 'Wade Maxfield', 'ppc'
[-- Attachment #1: Type: text/plain, Size: 8053 bytes --]
So can u access your NFS mapped partition? If you can access every FILEs
on the partition, running updatedb ought to index the NFS partition
also. Then “locate fixdep” is just to find the local indexed database
and display the matched result --- I just don’t understand the problem.
Please state more what have you done in order to let us help you.
-----Original Message-----
From: linuxppc-embedded-bounces+vows_siu=yahoo.com.hk@ozlabs.org
[mailto:linuxppc-embedded-bounces+vows_siu=yahoo.com.hk@ozlabs.org] On
Behalf Of Wade Maxfield
Sent: Tuesday, August 22, 2006 5:34 AM
To: ppc
Subject: ML40X, ppc 405 crash
I was running NFS on ML40X. I did a "updatedb" and then immediately,
"locate fixdep"
I got the following crash
root@ml403:/home/moduletest# updatedb
locate fixdep
eth0: Could not transmit buffer.
eth0: Could not transmit buffer.
eth0: Could not transmit buffer.
Oops: kernel access of bad area, sig: 11 [#1]
PREEMPT
NIP: C01D0F74 LR: C01D0910 SP: C28B1930 REGS: c28b1880 TRAP: 0300 Not
tainted
MSR: 00029030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000004, DSISR: 00800000
TASK = c0b034c0[5097] 'frcode' THREAD: c28b0000
Last syscall: 234
GPR00: 00000000 C28B1930 C0B034C0 C35E3200 C03CC380 C276E810 000005E8
C3CE8880
GPR08: 00000002 00000000 C3CE890C 00000000 33003599 10018E04 100C3208
C02DCE08
GPR16: C00DB1CC C02DCE08 00000002 0000000A C28B1DF8 C02E0000 C02A0000
C3A30940
GPR24: 00000000 00000000 00000000 C3A30940 00000000 C35E3200 C3CE8880
C03A8800
NIP [c01d0f74] pfifo_fast_dequeue+0x40/0x74
LR [c01d0910] qdisc_restart+0x30/0x2b4
Call trace:
[c01c1e94] dev_queue_xmit+0x264/0x318
[c01dd8dc] ip_finish_output+0x140/0x2cc
[c01dddb0] ip_queue_xmit+0x348/0x53c
[c01ef628] tcp_transmit_skb+0x324/0x7f8
[c01f05fc] tcp_write_xmit+0x14c/0x31c
[c01ed360] __tcp_data_snd_check+0xc8/0xfc
[c01ed9a4] tcp_rcv_established+0x2c0/0x8ac
[c01f7250] tcp_v4_do_rcv+0x184/0x374
[c01f7d9c] tcp_v4_rcv+0x95c/0xa4c
[c01da000] ip_local_deliver+0x120/0x298
[c01da86c] ip_rcv+0x400/0x508
[c01c2614] netif_receive_skb+0x24c/0x2fc
[c01c276c] process_backlog+0xa8/0x1a0
[c01c2908] net_rx_action+0xa4/0x1cc
[c001bef4] ___do_softirq+0x7c/0x114
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Rebooting in 180 seconds..
------------------------------------------------------------------------
------------------------------------------------------------------------
-----
Here is the kernel build and boot information. (I use the demo compact
flash disk image shipped with the ml403 as an intermediate. I've not yet
been able to get a small enough build to fit on 412 meg using your
tools.)
Linux version 2.6.10_mvl401-ml40x (HYPERLINK
"mailto:root@localhost.localdomain"root@localhost.localdomain) (gcc
version 3.4.3 (MontaV
ista 3.4.3-25.0.107.0601076 2006-07-21)) #1 Fri Aug 18 14:43:45 CDT 2006
Xilinx ML40x Reference System (Virtex-4 FX)
Port by MontaVista Software, Inc. (HYPERLINK
"mailto:source@mvista.com"source@mvista.com)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 ip=on root=/dev/xsysace2 rw
Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0
PID hash table entries: 512 (order: 9, 8192 bytes)
hr_time_init: arch_to_nsec = 6990506, nsec_to_arch = 1288490158
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61824k available (2244k kernel code, 640k data, 140k init, 0k
highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
Registering platform device 'xilinx_emac.0'. Parent at platform
Registering platform device 'xilinx_fb.0'. Parent at platform
Registering platform device 'xilinx_sysace.0'. Parent at platform
Registering platform device 'xilinx_iic.0'. Parent at platform
Registering platform device 'xilinx_gpio.0'. Parent at platform
Registering platform device 'xilinx_gpio.1'. Parent at platform
Registering platform device 'xilinx_gpio.2'. Parent at platform
Registering platform device 'xilinx_ps2.0'. Parent at platform
Registering platform device 'xilinx_ps2.1'. Parent at platform
Installing knfsd (copyright (C) 1996 HYPERLINK
"mailto:okir@monad.swb.de"okir@monad.swb.de).
Console: switching to colour frame buffer device 80x30
xgpio #0 at 0x90000000 mapped to 0xC505C000
xgpio #1 at 0x90001000 mapped to 0xC505E000
xgpio #2 at 0x90002000 mapped to 0xC5060000
xilinx_ps2 #0 at 0xA9000000 mapped to 0xC5062000
xilinx_ps2 #1 at 0xA9001000 mapped to 0xC5064000
Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ sharing
disabled
Registering platform device 'serial8250'. Parent at platform
ttyS0 at MMIO 0x0 (irq = 9) is a 16450
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
elevator: using anticipatory as default io scheduler
System ACE at 0xCF000000 mapped to 0xC5066000, irq=3, 500472KB
xsysace: xsysace1 xsysace2
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
xemac 0: using fifo mode.
eth0: Xilinx EMAC #0 at 0x60000000 mapped to 0xC5068000, irq=0
i2c /dev entries driver
xilinx_iic.0 #0 at 0xA8000000 mapped to 0xC506E000, irq=6
mice: PS/2 mouse device common for all mice
atkbd.c: keyboard reset failed on xilinxps2/serio0
atkbd.c: keyboard reset failed on xilinxps2/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from HYPERLINK "http://0.0.0.0"0.0.0.0, my
address is HYPERLINK "http://172.17.6.49"172.17.6.49
IP-Config: Complete:
device=eth0, addr=HYPERLINK "http://172.17.6.49" 172.17.6.49,
mask=HYPERLINK "http://255.255.254.0"255.255.254.0, gw=HYPERLINK
"http://172.17.7.254"172.17.7.254,
host=HYPERLINK "http://172.17.6.49"172.17.6.49, domain=HYPERLINK
"http://precisiondrilling.com" precisiondrilling.com, nis-domain=(none),
bootserver=HYPERLINK "http://0.0.0.0"0.0.0.0, rootserver=HYPERLINK
"http://0.0.0.0"0.0.0.0, rootpath=
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 140k init
INIT: version 2.78 booting
Activating swap...
Checking all file systems...
fsck 1.27 (8-Mar-2002)
Calculating module dependencies... depmod: QM_MODULES: Function not
implemented
done.
Loading modules:
modprobe: QM_MODULES: Function not implemented
Mounting local filesystems...
nothing was mounted
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Starting portmap daemon: portmap.
Starting dhcpcd on eth0
Running ntpdate to synchronize clock.
Cleaning: /tmp /var/lock /var/rundhcpcd[775]: dhcpConfig: ioctl
SIOCADDRT: File exists
.
INIT: Entering runlevel: 3
Starting kernel log daemon: klogd.
Starting system log daemon: syslogd.
Hostname: ml403.
Creating barrier for shutdown
Starting X11 session for user 'linux'
Welcome to the ML403 Evaluation Board
(C) 2004 Xilinx, Inc - Systems Engineering Group
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date:
2006/8/21
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date:
2006/8/21
[-- Attachment #2: Type: text/html, Size: 11821 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ML40X, ppc 405 crash
2006-08-22 10:52 ` alva
@ 2006-08-22 14:51 ` Wade Maxfield
0 siblings, 0 replies; 4+ messages in thread
From: Wade Maxfield @ 2006-08-22 14:51 UTC (permalink / raw)
To: alva; +Cc: ppc
[-- Attachment #1: Type: text/plain, Size: 8024 bytes --]
I SINCERELY APOLOGIZE!!!! I MADE A MISTAKE!
I sent this email to the wrong address! I've got to look to see how I did
this.
please ignore this message!!
thanks,
wade
On 8/22/06, alva <vows_siu@yahoo.com.hk> wrote:
>
> So can u access your NFS mapped partition? If you can access every FILEs
> on the partition, running updatedb ought to index the NFS partition also.
> Then "locate fixdep" is just to find the local indexed database and display
> the matched result --- I just don't understand the problem. Please state
> more what have you done in order to let us help you.
>
>
>
>
>
> -----Original Message-----
> *From:* linuxppc-embedded-bounces+vows_siu=yahoo.com.hk@ozlabs.org[mailto:
> linuxppc-embedded-bounces+vows_siu=yahoo.com.hk@ozlabs.org] *On Behalf Of
> *Wade Maxfield
> *Sent:* Tuesday, August 22, 2006 5:34 AM
> *To:* ppc
> *Subject:* ML40X, ppc 405 crash
>
>
>
>
> I was running NFS on ML40X. I did a "updatedb" and then immediately,
> "locate fixdep"
>
> I got the following crash
>
> root@ml403:/home/moduletest# updatedb
> locate fixdep
> eth0: Could not transmit buffer.
> eth0: Could not transmit buffer.
> eth0: Could not transmit buffer.
> Oops: kernel access of bad area, sig: 11 [#1]
> PREEMPT
> NIP: C01D0F74 LR: C01D0910 SP: C28B1930 REGS: c28b1880 TRAP: 0300 Not
> tainted
> MSR: 00029030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> DAR: 00000004, DSISR: 00800000
> TASK = c0b034c0[5097] 'frcode' THREAD: c28b0000
> Last syscall: 234
> GPR00: 00000000 C28B1930 C0B034C0 C35E3200 C03CC380 C276E810 000005E8
> C3CE8880
> GPR08: 00000002 00000000 C3CE890C 00000000 33003599 10018E04 100C3208
> C02DCE08
> GPR16: C00DB1CC C02DCE08 00000002 0000000A C28B1DF8 C02E0000 C02A0000
> C3A30940
> GPR24: 00000000 00000000 00000000 C3A30940 00000000 C35E3200 C3CE8880
> C03A8800
> NIP [c01d0f74] pfifo_fast_dequeue+0x40/0x74
> LR [c01d0910] qdisc_restart+0x30/0x2b4
> Call trace:
> [c01c1e94] dev_queue_xmit+0x264/0x318
> [c01dd8dc] ip_finish_output+0x140/0x2cc
> [c01dddb0] ip_queue_xmit+0x348/0x53c
> [c01ef628] tcp_transmit_skb+0x324/0x7f8
> [c01f05fc] tcp_write_xmit+0x14c/0x31c
> [c01ed360] __tcp_data_snd_check+0xc8/0xfc
> [c01ed9a4] tcp_rcv_established+0x2c0/0x8ac
> [c01f7250] tcp_v4_do_rcv+0x184/0x374
> [c01f7d9c] tcp_v4_rcv+0x95c/0xa4c
> [c01da000] ip_local_deliver+0x120/0x298
> [c01da86c] ip_rcv+0x400/0x508
> [c01c2614] netif_receive_skb+0x24c/0x2fc
> [c01c276c] process_backlog+0xa8/0x1a0
> [c01c2908] net_rx_action+0xa4/0x1cc
> [c001bef4] ___do_softirq+0x7c/0x114
> Kernel panic - not syncing: Aiee, killing interrupt handler!
> <0>Rebooting in 180 seconds..
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------
>
> Here is the kernel build and boot information. (I use the demo compact
> flash disk image shipped with the ml403 as an intermediate. I've not yet
> been able to get a small enough build to fit on 412 meg using your tools.)
>
> Linux version 2.6.10_mvl401-ml40x (root@localhost.localdomain) (gcc
> version 3.4.3 (MontaV
> ista 3.4.3-25.0.107.0601076 2006-07-21)) #1 Fri Aug 18 14:43:45 CDT 2006
> Xilinx ML40x Reference System (Virtex-4 FX)
> Port by MontaVista Software, Inc. (source@mvista.com)
> Built 1 zonelists
> Kernel command line: console=ttyS0,115200 ip=on root=/dev/xsysace2 rw
> Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0
> PID hash table entries: 512 (order: 9, 8192 bytes)
> hr_time_init: arch_to_nsec = 6990506, nsec_to_arch = 1288490158
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 61824k available (2244k kernel code, 640k data, 140k init, 0k
> highmem)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> spawn_desched_task(00000000)
> desched cpu_callback 3/00000000
> ksoftirqd started up.
> desched cpu_callback 2/00000000
> desched thread 0 started up.
> NET: Registered protocol family 16
> Registering platform device 'xilinx_emac.0'. Parent at platform
> Registering platform device 'xilinx_fb.0'. Parent at platform
> Registering platform device 'xilinx_sysace.0'. Parent at platform
> Registering platform device 'xilinx_iic.0'. Parent at platform
> Registering platform device 'xilinx_gpio.0'. Parent at platform
> Registering platform device 'xilinx_gpio.1'. Parent at platform
> Registering platform device 'xilinx_gpio.2'. Parent at platform
> Registering platform device 'xilinx_ps2.0'. Parent at platform
> Registering platform device 'xilinx_ps2.1'. Parent at platform
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> Console: switching to colour frame buffer device 80x30
> xgpio #0 at 0x90000000 mapped to 0xC505C000
> xgpio #1 at 0x90001000 mapped to 0xC505E000
> xgpio #2 at 0x90002000 mapped to 0xC5060000
> xilinx_ps2 #0 at 0xA9000000 mapped to 0xC5062000
> xilinx_ps2 #1 at 0xA9001000 mapped to 0xC5064000
> Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ sharing disabled
> Registering platform device 'serial8250'. Parent at platform
> ttyS0 at MMIO 0x0 (irq = 9) is a 16450
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> loop: loaded (max 8 devices)
> elevator: using anticipatory as default io scheduler
> System ACE at 0xCF000000 mapped to 0xC5066000, irq=3, 500472KB
> xsysace: xsysace1 xsysace2
> PPP generic driver version 2.4.2
> PPP Deflate Compression module registered
> NET: Registered protocol family 24
> xemac 0: using fifo mode.
> eth0: Xilinx EMAC #0 at 0x60000000 mapped to 0xC5068000, irq=0
> i2c /dev entries driver
> xilinx_iic.0 #0 at 0xA8000000 mapped to 0xC506E000, irq=6
> mice: PS/2 mouse device common for all mice
> atkbd.c: keyboard reset failed on xilinxps2/serio0
> atkbd.c: keyboard reset failed on xilinxps2/serio1
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Sending DHCP requests ., OK
> IP-Config: Got DHCP answer from 0.0.0.0, my address is 172.17.6.49
> IP-Config: Complete:
> device=eth0, addr= 172.17.6.49, mask=255.255.254.0, gw=172.17.7.254,
> host=172.17.6.49, domain= precisiondrilling.com, nis-domain=(none),
> bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
> EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
> VFS: Mounted root (ext2 filesystem).
> Freeing unused kernel memory: 140k init
> INIT: version 2.78 booting
> Activating swap...
> Checking all file systems...
> fsck 1.27 (8-Mar-2002)
> Calculating module dependencies... depmod: QM_MODULES: Function not
> implemented
>
> done.
> Loading modules:
> modprobe: QM_MODULES: Function not implemented
>
> Mounting local filesystems...
> nothing was mounted
> Cleaning: /etc/network/ifstate.
> Setting up IP spoofing protection: rp_filter.
> Disable TCP/IP Explicit Congestion Notification: done.
> Configuring network interfaces: done.
> Starting portmap daemon: portmap.
> Starting dhcpcd on eth0
> Running ntpdate to synchronize clock.
> Cleaning: /tmp /var/lock /var/rundhcpcd[775]: dhcpConfig: ioctl SIOCADDRT:
> File exists
>
> .
> INIT: Entering runlevel: 3
> Starting kernel log daemon: klogd.
> Starting system log daemon: syslogd.
> Hostname: ml403.
> Creating barrier for shutdown
> Starting X11 session for user 'linux'
> Welcome to the ML403 Evaluation Board
> (C) 2004 Xilinx, Inc - Systems Engineering Group
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 2006/8/21
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 2006/8/21
>
[-- Attachment #2: Type: text/html, Size: 12346 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-08-22 14:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-21 21:34 ML40X, ppc 405 crash Wade Maxfield
2006-08-22 10:52 ` alva
2006-08-22 14:51 ` Wade Maxfield
-- strict thread matches above, loose matches on Subject: below --
2006-08-21 22:20 ML40x, " Wade Maxfield
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).