* ppc32: problems boot the Linux for SBS/K2 board.
[not found] <20050622020003.7882267B4C@ozlabs.org>
@ 2005-06-27 2:25 ` signal@embedworld
0 siblings, 0 replies; 2+ messages in thread
From: signal@embedworld @ 2005-06-27 2:25 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 908 bytes --]
Hi,
We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI
interface. The old kernel on the boards worked quite well with Vxworks BSP
and Linux 2.4.2 kernel. But it failed to boot with the new kernel version
2.6.8(I had tested other versions too). Here is the message I got from the
HyperTerminal.
-------------------------------------------------------------
Attaching to ATA disk device... done.
Loading /ata0/tftpboot/zImage.elf...1425876
Starting at 0x800000...
id mach(): done
MMU:enter
MMU:hw init
hash:enter
hash:find piece
hash:patch
hash:done
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit
-----------------------------------
What's the problems of these failure?
Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?
Thanks in advanced!
Jianjie Ma
2005.6.27
[-- Attachment #2: Type: text/html, Size: 1181 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* ppc32: problems boot the Linux for SBS/K2 board.
@ 2005-06-27 3:41 signal@embedworld
0 siblings, 0 replies; 2+ messages in thread
From: signal@embedworld @ 2005-06-27 3:41 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 905 bytes --]
Hi,
We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI
interface. The old kernel on the boards worked quite well with Vxworks BSP
and Linux 2.4.2 kernel. But it failed to boot with the new kernel version
2.6.8(I had tested other versions too). Here is the message I got from the
HyperTerminal.
-------------------------------------------------------------
Attaching to ATA disk device... done.
Loading /ata0/tftpboot/zImage.elf...1425876
Starting at 0x800000...
id mach(): done
MMU:enter
MMU:hw init
hash:enter
hash:find piece
hash:patch
hash:done
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit
-----------------------------------
What's the problems of these failure?
Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?
Thanks in advanced!
Jianjie Ma
2005.6.27
[-- Attachment #2: Type: text/html, Size: 1092 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-06-27 3:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20050622020003.7882267B4C@ozlabs.org>
2005-06-27 2:25 ` ppc32: problems boot the Linux for SBS/K2 board signal@embedworld
2005-06-27 3:41 signal@embedworld
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).