linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* ppc32: problems boot the Linux for SBS/K2 board.
       [not found] <20050622020003.7882267B4C@ozlabs.org>
@ 2005-06-27  2:25 ` signal@embedworld
  0 siblings, 0 replies; 2+ messages in thread
From: signal@embedworld @ 2005-06-27  2:25 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 908 bytes --]

Hi, 
 We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI 
interface. The old kernel on the boards worked quite well with Vxworks BSP 
and Linux 2.4.2 kernel. But it failed to boot with the new kernel version 
2.6.8(I had tested other versions too). Here is the message I got from the 
HyperTerminal.
 -------------------------------------------------------------
Attaching to ATA disk device... done.
Loading /ata0/tftpboot/zImage.elf...1425876
Starting at 0x800000...

id mach(): done
 
MMU:enter

MMU:hw init

hash:enter

hash:find piece

hash:patch

hash:done

MMU:mapin

MMU:setio

MMU:exit

setup_arch: enter

setup_arch: bootmem

arch: exit

-----------------------------------

What's the problems of these failure?

Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?
 Thanks in advanced!
  Jianjie Ma
 2005.6.27

[-- Attachment #2: Type: text/html, Size: 1181 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* ppc32: problems boot the Linux for SBS/K2 board.
@ 2005-06-27  3:41 signal@embedworld
  0 siblings, 0 replies; 2+ messages in thread
From: signal@embedworld @ 2005-06-27  3:41 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 905 bytes --]

Hi, 
We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI 
interface. The old kernel on the boards worked quite well with Vxworks BSP 
and Linux 2.4.2 kernel. But it failed to boot with the new kernel version 
2.6.8(I had tested other versions too). Here is the message I got from the 
HyperTerminal.

-------------------------------------------------------------
Attaching to ATA disk device... done.
Loading /ata0/tftpboot/zImage.elf...1425876
Starting at 0x800000...

id mach(): done
MMU:enter

MMU:hw init

hash:enter

hash:find piece

hash:patch

hash:done

MMU:mapin

MMU:setio

MMU:exit

setup_arch: enter

setup_arch: bootmem

arch: exit

-----------------------------------

What's the problems of these failure?

Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?

Thanks in advanced!

Jianjie Ma
2005.6.27

[-- Attachment #2: Type: text/html, Size: 1092 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-06-27  3:41 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-27  3:41 ppc32: problems boot the Linux for SBS/K2 board signal@embedworld
     [not found] <20050622020003.7882267B4C@ozlabs.org>
2005-06-27  2:25 ` signal@embedworld

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).