From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ovro.ovro.caltech.edu (ovro.ovro.caltech.edu [192.100.16.2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "mail.ovro.caltech.edu", Issuer "mail.ovro.caltech.edu" (not verified)) by ozlabs.org (Postfix) with ESMTP id CE052DDF0C for ; Wed, 11 Apr 2007 02:13:43 +1000 (EST) Message-ID: <461BB78D.5080401@ovro.caltech.edu> Date: Tue, 10 Apr 2007 09:13:01 -0700 From: David Hawkins MIME-Version: 1.0 To: Gary Kenaley Subject: Re: Unable to Boot 2.6.19.2 from ELDK 4.1 on MPC8349E MDS References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Gary Kenaley wrote: > I have been evaluating Freescale 2.6.11, Wind River 2.6.14, and am now > attempting Denx 2.6.19 (from ELDK 4.1) - running on the Rev 1.0 MPC8349E > MDS (V1.1 CPU). I boot 2.6.19.2 using the factory u-boot 1.1.3 and the > kernel immediately hangs: Hey Gary, I'm working with the same board (and have a rev 3.0 EA board too). Here are my notes for the ELDK 4.0; http://www.ovro.caltech.edu/~dwh/powerpc_mpc8349e.pdf I setup the board so the software developers could start working with it, so haven't touched it for a while ... (the instructions use the arch/ppc version) ... So, try repeating via the arch/ppc method, and follow Ben's arch/powerpc advice and let us know how things went. If you're having trouble, then I hope to get back to working with the board soon, so I can also take a crack at repeating Ben's arch/powerpc method. Cheers, Dave