linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: xianghua xiao <x.xiao@freescale.com>
To: Zhang Wei <wei.zhang@freescale.com>
Cc: linuxppc-dev@ozlabs.org, paulus@samba.org
Subject: Re: [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
Date: Tue, 22 May 2007 15:37:52 -0500	[thread overview]
Message-ID: <465354A0.5020502@freescale.com> (raw)
In-Reply-To: <1179805110272-git-send-email-wei.zhang@freescale.com>

where is the new uli1575 node referred except for this added snippet?
thanks,
xianghua

Zhang Wei wrote:

>Add uli1575 pci-bridge sector. It fixes the issue of ULI1575 not found on rev.2 board.
>
>Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
>---
> arch/powerpc/boot/dts/mpc8641_hpcn.dts      |    6 ++++++
> arch/powerpc/boot/dts/mpc8641_hpcn_srio.dts |    6 ++++++
> 2 files changed, 12 insertions(+), 0 deletions(-)
>
>diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>index 260b264..04626b1 100644
>--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>@@ -297,6 +297,12 @@
> 				interrupts = <49 2>;
> 				interrupt-parent = <&mpic>;
> 			};
>+			uli1575: uli1575@100 {
>+				reg = <0 0 0 0 0>;
>+				pci_bridge@200 {
>+					reg = <0 0 0 0 0>;
>+				};
>+			};
> 
> 		};
> 
>  
>

  parent reply	other threads:[~2007-05-22 20:42 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-22  3:38 [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0 Zhang Wei
2007-05-22  3:38 ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Zhang Wei
2007-05-22  3:38   ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file Zhang Wei
2007-05-22  3:38     ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Zhang Wei
2007-05-22  3:38       ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Zhang Wei
2007-05-22  3:38         ` [PATCH 5/5] Set IDE in ULI1575 to not native mode Zhang Wei
2007-05-29 18:15           ` Jon Loeliger
2007-05-29 20:50           ` Kumar Gala
2007-05-30  2:25             ` Zhang Wei-r63237
2007-05-30 11:40               ` Benjamin Herrenschmidt
2007-05-31  2:00                 ` Zhang Wei-r63237
2007-05-30 11:18             ` Benjamin Herrenschmidt
2007-05-29 18:15         ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Jon Loeliger
2007-05-22 17:59       ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Wade Farnsworth
2007-05-23  3:35         ` Zhang Wei-r63237
2007-05-31 13:43           ` Kumar Gala
2007-06-01  2:01             ` Zhang Wei-r63237
2007-06-01  5:08               ` Kumar Gala
2007-06-01  6:28                 ` Paul Mackerras
2007-06-01  6:45                   ` Zhang Wei-r63237
2007-06-01  7:44                     ` Benjamin Herrenschmidt
2007-06-01  7:53                       ` Zhang Wei-r63237
2007-06-01  8:00                         ` Benjamin Herrenschmidt
2007-06-01 16:35                       ` Matt Sealey
2007-06-01 16:47                         ` Jon Loeliger
2007-06-01 22:41                           ` Benjamin Herrenschmidt
2007-06-01 22:41                         ` Benjamin Herrenschmidt
2007-06-02  8:36                           ` Segher Boessenkool
2007-06-02  8:55                             ` Benjamin Herrenschmidt
2007-06-01 19:58                     ` Kumar Gala
2007-06-01 23:28                       ` Benjamin Herrenschmidt
2007-06-04 19:00                         ` Jon Loeliger
2007-06-04 22:24                           ` Benjamin Herrenschmidt
2007-06-01  6:29                 ` Zhang Wei-r63237
2007-05-29 18:14       ` Jon Loeliger
2007-05-22 20:37     ` xianghua xiao [this message]
2007-05-23  3:38       ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file Zhang Wei-r63237
2007-05-29 18:14     ` Jon Loeliger
2007-05-29 20:39     ` Kumar Gala
2007-05-30 10:02       ` Zhang Wei-r63237
2007-05-30 10:18         ` Segher Boessenkool
2007-05-30 11:07         ` Benjamin Herrenschmidt
2007-05-30 22:26       ` Wade Farnsworth
2007-05-29 18:13   ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Jon Loeliger
2007-05-22  3:53 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0 Kumar Gala
2007-05-22  4:46   ` Zhang Wei-r63237
2007-05-22 12:54     ` Kumar Gala
2007-05-22 16:28 ` Jon Loeliger
2007-05-22 17:47 ` Wade Farnsworth
2007-05-23  2:48   ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 andMPC8641HPCN " Zhang Wei-r63237
2007-05-23 22:37     ` Wade Farnsworth
2007-05-29 18:12 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN " Jon Loeliger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=465354A0.5020502@freescale.com \
    --to=x.xiao@freescale.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    --cc=wei.zhang@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).