From: Andrew Liu <shengping.liu@windriver.com>
To: Mustafa Cayir <mustafa.cayir@bte.mam.gov.tr>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Problem booting linux with device tree table
Date: Tue, 18 Sep 2007 17:01:12 +0800 [thread overview]
Message-ID: <46EF93D8.6050201@windriver.com> (raw)
In-Reply-To: <7B9A8FF57DBB524190E98CABF6E56F070B9298@itri.bte.mam.gov.tr>
[-- Attachment #1: Type: text/plain, Size: 2081 bytes --]
Latest U-boot need a chosen node in your DTS file, So u need to add a
chosen node in your DTS file.
Take mpc8272ads for example: in its DTS, has the following:
chosen {
name = "chosen";
linux,platform = <0>;
interrupt-controller = <&Cpm_pic>;
};
BRs,
Andrew
Mustafa Cayir wrote:
>
> Hi all,
>
> I am trying to boot TQM5200 with linux 2.6 kernel. i am using latest
> version of linux and u-boot from denx. And compiled with ELDK4.1
>
> i use dtc compiler with following command:
> dtc -O dtb -o tqm5200.dtb -b 0 tqm5200.dts
>
> Booting process gives following error and reset the board.
>
> WARNING: could not create /chosen FDT_ERR_NOSPACE.
> ERROR: /chosen node create failed - must RESET the board to recover.
>
> Regards.
>
>
>
> Using FEC ETHERNET device
> TFTP from server 10.18.2.83; our IP address is 10.18.5.44
> Filename 'uImage'.
> Load address: 0x200000
> Loading: #################################################################
> ####################################
> done
> Bytes transferred = 1473038 (167a0e hex)
> Using FEC ETHERNET device
> TFTP from server 10.18.2.83; our IP address is 10.18.5.44
> Filename 'tqm5200.dtb'.
> Load address: 0x400000
> Loading: #
> done
> Bytes transferred = 3816 (ee8 hex)
> ## Booting image at 00200000 ...
> Image Name: Linux-2.6.23-rc6-gf695e369
> Created: 2007-09-19 1:31:43 UTC
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1472974 Bytes = 1.4 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> Booting using the fdt at 0x400000
> WARNING: could not create /chosen FDT_ERR_NOSPACE.
> ERROR: /chosen node create failed - must RESET the board to recover.
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
[-- Attachment #2: shengping.liu.vcf --]
[-- Type: text/x-vcard, Size: 385 bytes --]
begin:vcard
fn:Andrew Liu
n:;Andrew Liu
org:China Development Center;Engineering
adr:;;Wangjing Zhonghuan Nanlu No.9 Wangjing Plaza Tower B 15F Chaoyang District Beijing China;Beijing;;100102;China
email;internet:shengping.liu@windriver.com
tel;work:86-10-8477-8639
tel;fax:86-10-6479-0367
tel;cell:86-13717751687
url:http://twiki.wrs.com/do/view/Main/AndrewLiu
version:2.1
end:vcard
next prev parent reply other threads:[~2007-09-18 13:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 7:53 Problem booting linux with device tree table Mustafa Cayir
2007-09-18 8:06 ` Bartlomiej Sieka
2007-09-19 19:05 ` Jon Loeliger
2007-09-18 9:01 ` Andrew Liu [this message]
2007-09-18 15:17 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EF93D8.6050201@windriver.com \
--to=shengping.liu@windriver.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=mustafa.cayir@bte.mam.gov.tr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).