* JTAG init of MPC5200B
@ 2007-11-06 13:30 lokowich
0 siblings, 0 replies; only message in thread
From: lokowich @ 2007-11-06 13:30 UTC (permalink / raw)
To: linuxppc-embedded
I've been unable to properly initialize my MPC5200B from a GDB session
or OCD Commander using a OCDemon JTAG emulator unless the device is
first initialized by U-Boot. I've used same register setup as defined
in the U-Boot startup code. This prevents me from loading a RAM-based
U-Boot onto a bare board over the JTAG interface. Any guidance?
--
Mark Lokowich
Systems Engineer
Advanced Communication Design
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-11-06 14:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-06 13:30 JTAG init of MPC5200B lokowich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).