MontaVista 4.0.1 on Xilinx ML405 board

MontaVista 4.0.1 on Xilinx ML405 board

[gsk19]

We built a design for ML405 using EDK 9.1.02. EDK also 
creates linux drivers for MontaVista Pro 4.0.1 (2.6.10).
The drivers were copied to a clean copy of Pro 4.0.1 and the 
kernel was built. When we downloaded the kernel to the target 
and ran it, we got exception. We didn't get any messages on 
the hyper terminal. 
We used Tri-Mode Ethernet and UART lite.
MontaVista checked the integration of EDK 8.2 with ML403. 
Can you help ?

Re: MontaVista 4.0.1 on Xilinx ML405 board

[schardt]

lock up the location of the __log_buf in the System.map  and check if
errormessages are stored there in the memory.
check the console device. it must be /dev/ttyULx

Georg



gsk19@bezeqint.net wrote:
> We built a design for ML405 using EDK 9.1.02. EDK also 
> creates linux drivers for MontaVista Pro 4.0.1 (2.6.10).
> The drivers were copied to a clean copy of Pro 4.0.1 and the 
> kernel was built. When we downloaded the kernel to the target 
> and ran it, we got exception. We didn't get any messages on 
> the hyper terminal. 
> We used Tri-Mode Ethernet and UART lite.
> MontaVista checked the integration of EDK 8.2 with ML403. 
> Can you help ?
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>   



-------------------------------------------------------------------
-------------------------------------------------------------------
Forschungszentrum Jülich GmbH
52425 Jülich

Sitz der Gesellschaft: Jülich
Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe
Geschäftsführung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Dr. Sebastian M. Schmidt
-------------------------------------------------------------------
-------------------------------------------------------------------