* [PATCH 0/2] QE clock source improvements @ 2007-12-03 21:17 Timur Tabi 2007-12-03 21:17 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi 0 siblings, 1 reply; 8+ messages in thread From: Timur Tabi @ 2007-12-03 21:17 UTC (permalink / raw) To: netdev, linuxppc-dev, galak This patch set adds a new property to make specifying QE clock sources easier, adds a function to help parse the property, and updates the ucc_geth driver to take advantage of all this. Patch #1 is an arch/powerpc patch meant for Kumar's for-2.6.25 branch. Patch #2 is a netdev patch, so it's either for Jeff G and/or Kumar. ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] qe: add function qe_clock_source() 2007-12-03 21:17 [PATCH 0/2] QE clock source improvements Timur Tabi @ 2007-12-03 21:17 ` Timur Tabi 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi 2007-12-12 15:19 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi 0 siblings, 2 replies; 8+ messages in thread From: Timur Tabi @ 2007-12-03 21:17 UTC (permalink / raw) To: netdev, linuxppc-dev, galak; +Cc: Timur Tabi Add function qe_clock_source() which takes a string containing the name of a QE clock source (as is typically found in device trees) and returns the matching enum qe_clock value. Update booting-without-of.txt to indicate that the UCC properties rx-clock and tx-clock are deprecated and replaced with rx-clock-name and tx-clock-name, which use strings instead of numbers to indicate QE clock sources. Signed-off-by: Timur Tabi <timur@freescale.com> --- This patch applies to Kumar's for-2.6.25 branch. You may need to apply my other pending patch, "qe: add ability to upload QE firmware", first. Documentation/powerpc/booting-without-of.txt | 13 ++++++++++ arch/powerpc/sysdev/qe_lib/qe.c | 32 ++++++++++++++++++++++++++ include/asm-powerpc/qe.h | 1 + 3 files changed, 46 insertions(+), 0 deletions(-) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e9a3cb1..c4342d3 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1626,6 +1626,19 @@ platforms are moved over to use the flattened-device-tree model. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - pio-handle : The phandle for the Parallel I/O port configuration. + - rx-clock-name: the UCC receive clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively + - tx-clock-name: the UCC transmit clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively + The following two properties are deprecated. rx-clock has been replaced + with rx-clock-name, and tx-clock has been replaced with tx-clock-name. + Drivers that currently use the deprecated properties should continue to + do so, in order to support older device trees, but they should be updated + to check for the new properties first. - rx-clock : represents the UCC receive clock source. 0x00 : clock source is disabled; 0x1~0x10 : clock source is BRG1~BRG16 respectively; diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 865277b..5df8530 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -204,6 +204,38 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) } EXPORT_SYMBOL(qe_setbrg); +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; +} +EXPORT_SYMBOL(qe_clock_source); + /* Initialize SNUMs (thread serial numbers) according to * QE Module Control chapter, SNUM table */ diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 35c7b8d..430dc77 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -84,6 +84,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val); /* QE internal API */ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +enum qe_clock qe_clock_source(const char *source); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); -- 1.5.2.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties 2007-12-03 21:17 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi @ 2007-12-03 21:17 ` Timur Tabi 2007-12-12 15:19 ` Timur Tabi ` (2 more replies) 2007-12-12 15:19 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi 1 sibling, 3 replies; 8+ messages in thread From: Timur Tabi @ 2007-12-03 21:17 UTC (permalink / raw) To: netdev, linuxppc-dev, galak; +Cc: Timur Tabi Updates the ucc_geth device driver to check the new rx-clock-name and tx-clock-name properties first. If present, it uses the new function qe_clock_source() to obtain the clock source. Otherwise, it checks the deprecated rx-clock and tx-clock properties. Update the device trees for 832x, 836x, and 8568 to contain the new property names only. Signed-off-by: Timur Tabi <timur@freescale.com> --- This patch applies to Kumar's for-2.6.25 branch. ucc_geth will compile but not run if my other patch, "qe: add function qe_clock_source" has not also been applied. arch/powerpc/boot/dts/mpc832x_mds.dts | 8 ++-- arch/powerpc/boot/dts/mpc832x_rdb.dts | 8 ++-- arch/powerpc/boot/dts/mpc836x_mds.dts | 8 ++-- arch/powerpc/boot/dts/mpc8568mds.dts | 8 ++-- drivers/net/ucc_geth.c | 55 ++++++++++++++++++++++++++++++-- 5 files changed, 67 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index c64f303..fe54489 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -223,8 +223,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <19>; - tx-clock = <1a>; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; phy-handle = < &phy3 >; pio-handle = < &pio3 >; }; @@ -244,8 +244,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <17>; - tx-clock = <18>; + rx-clock-name = "clk7"; + tx-clock-name = "clk8"; phy-handle = < &phy4 >; pio-handle = < &pio4 >; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 388c8a7..e68a08b 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -202,8 +202,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <20>; - tx-clock = <13>; + rx-clock-name = "clk16"; + tx-clock-name = "clk3"; phy-handle = <&phy00>; pio-handle = <&ucc2pio>; }; @@ -223,8 +223,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <19>; - tx-clock = <1a>; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; phy-handle = <&phy04>; pio-handle = <&ucc3pio>; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 0b2d2b5..bfd48d0 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -254,8 +254,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <19>; + rx-clock-name = "none"; + tx-clock-name = "clk9"; phy-handle = < &phy0 >; phy-connection-type = "rgmii-id"; pio-handle = < &pio1 >; @@ -276,8 +276,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <14>; + rx-clock-name = "none"; + tx-clock-name = "clk4"; phy-handle = < &phy1 >; phy-connection-type = "rgmii-id"; pio-handle = < &pio2 >; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 5439437..cf45aab 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -333,8 +333,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <20>; + rx-clock-name = "none"; + tx-clock-name = "clk16"; pio-handle = <&pio1>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -355,8 +355,8 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <20>; + rx-clock-name = "none"; + tx-clock-name = "clk16"; pio-handle = <&pio2>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index a3ff270..a93342e 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3814,6 +3814,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma int err, ucc_num, max_speed = 0; const phandle *ph; const unsigned int *prop; + const char *sprop; const void *mac_addr; phy_interface_t phy_interface; static const int enet_to_speed[] = { @@ -3846,10 +3847,56 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ug_info->uf_info.ucc_num = ucc_num; - prop = of_get_property(np, "rx-clock", NULL); - ug_info->uf_info.rx_clock = *prop; - prop = of_get_property(np, "tx-clock", NULL); - ug_info->uf_info.tx_clock = *prop; + sprop = of_get_property(np, "rx-clock-name", NULL); + if (sprop) { + ug_info->uf_info.rx_clock = qe_clock_source(sprop); + if ((ug_info->uf_info.rx_clock < QE_CLK_NONE) || + (ug_info->uf_info.rx_clock > QE_CLK24)) { + printk(KERN_ERR + "ucc_geth: invalid rx-clock-name property\n"); + return -EINVAL; + } + } else { + prop = of_get_property(np, "rx-clock", NULL); + if (!prop) { + /* If both rx-clock-name and rx-clock are missing, + we want to tell people to use rx-clock-name. */ + printk(KERN_ERR + "ucc_geth: missing rx-clock-name property\n"); + return -EINVAL; + } + if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { + printk(KERN_ERR + "ucc_geth: invalid rx-clock propperty\n"); + return -EINVAL; + } + ug_info->uf_info.rx_clock = *prop; + } + + sprop = of_get_property(np, "tx-clock-name", NULL); + if (sprop) { + ug_info->uf_info.tx_clock = qe_clock_source(sprop); + if ((ug_info->uf_info.tx_clock < QE_CLK_NONE) || + (ug_info->uf_info.tx_clock > QE_CLK24)) { + printk(KERN_ERR + "ucc_geth: invalid tx-clock-name property\n"); + return -EINVAL; + } + } else { + prop = of_get_property(np, "rx-clock", NULL); + if (!prop) { + printk(KERN_ERR + "ucc_geth: mising tx-clock-name property\n"); + return -EINVAL; + } + if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { + printk(KERN_ERR + "ucc_geth: invalid tx-clock property\n"); + return -EINVAL; + } + ug_info->uf_info.tx_clock = *prop; + } + err = of_address_to_resource(np, 0, &res); if (err) return -EINVAL; -- 1.5.2.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi @ 2007-12-12 15:19 ` Timur Tabi 2007-12-14 5:07 ` Kumar Gala 2007-12-14 7:19 ` Kumar Gala 2 siblings, 0 replies; 8+ messages in thread From: Timur Tabi @ 2007-12-12 15:19 UTC (permalink / raw) To: galak; +Cc: netdev, linuxppc-dev Timur Tabi wrote: > Updates the ucc_geth device driver to check the new rx-clock-name and > tx-clock-name properties first. If present, it uses the new function > qe_clock_source() to obtain the clock source. Otherwise, it checks the > deprecated rx-clock and tx-clock properties. > > Update the device trees for 832x, 836x, and 8568 to contain the new property > names only. > > Signed-off-by: Timur Tabi <timur@freescale.com> If there are no objections, I'd like this patch to be pulled into 2.6.25. Thanks. -- Timur Tabi Linux kernel developer at Freescale ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi 2007-12-12 15:19 ` Timur Tabi @ 2007-12-14 5:07 ` Kumar Gala 2007-12-14 6:45 ` Jeff Garzik 2007-12-14 7:19 ` Kumar Gala 2 siblings, 1 reply; 8+ messages in thread From: Kumar Gala @ 2007-12-14 5:07 UTC (permalink / raw) To: Jeff Garzik; +Cc: netdev, Timur Tabi, linuxppc-dev list On Dec 3, 2007, at 3:17 PM, Timur Tabi wrote: > Updates the ucc_geth device driver to check the new rx-clock-name and > tx-clock-name properties first. If present, it uses the new function > qe_clock_source() to obtain the clock source. Otherwise, it checks > the > deprecated rx-clock and tx-clock properties. > > Update the device trees for 832x, 836x, and 8568 to contain the new > property > names only. > > Signed-off-by: Timur Tabi <timur@freescale.com> > --- > > This patch applies to Kumar's for-2.6.25 branch. ucc_geth will > compile but not > run if my other patch, "qe: add function qe_clock_source" has not > also been > applied. Jeff, I'll take this patch via powerpc.git if you don't have any issue since its just touching probe/setup bits. - k > arch/powerpc/boot/dts/mpc832x_mds.dts | 8 ++-- > arch/powerpc/boot/dts/mpc832x_rdb.dts | 8 ++-- > arch/powerpc/boot/dts/mpc836x_mds.dts | 8 ++-- > arch/powerpc/boot/dts/mpc8568mds.dts | 8 ++-- > drivers/net/ucc_geth.c | 55 ++++++++++++++++++++++++ > ++++++-- > 5 files changed, 67 insertions(+), 20 deletions(-) > > diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/ > boot/dts/mpc832x_mds.dts > index c64f303..fe54489 100644 > --- a/arch/powerpc/boot/dts/mpc832x_mds.dts > +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts > @@ -223,8 +223,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <19>; > - tx-clock = <1a>; > + rx-clock-name = "clk9"; > + tx-clock-name = "clk10"; > phy-handle = < &phy3 >; > pio-handle = < &pio3 >; > }; > @@ -244,8 +244,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <17>; > - tx-clock = <18>; > + rx-clock-name = "clk7"; > + tx-clock-name = "clk8"; > phy-handle = < &phy4 >; > pio-handle = < &pio4 >; > }; > diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/ > boot/dts/mpc832x_rdb.dts > index 388c8a7..e68a08b 100644 > --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts > +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts > @@ -202,8 +202,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <20>; > - tx-clock = <13>; > + rx-clock-name = "clk16"; > + tx-clock-name = "clk3"; > phy-handle = <&phy00>; > pio-handle = <&ucc2pio>; > }; > @@ -223,8 +223,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <19>; > - tx-clock = <1a>; > + rx-clock-name = "clk9"; > + tx-clock-name = "clk10"; > phy-handle = <&phy04>; > pio-handle = <&ucc3pio>; > }; > diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/ > boot/dts/mpc836x_mds.dts > index 0b2d2b5..bfd48d0 100644 > --- a/arch/powerpc/boot/dts/mpc836x_mds.dts > +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts > @@ -254,8 +254,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <0>; > - tx-clock = <19>; > + rx-clock-name = "none"; > + tx-clock-name = "clk9"; > phy-handle = < &phy0 >; > phy-connection-type = "rgmii-id"; > pio-handle = < &pio1 >; > @@ -276,8 +276,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <0>; > - tx-clock = <14>; > + rx-clock-name = "none"; > + tx-clock-name = "clk4"; > phy-handle = < &phy1 >; > phy-connection-type = "rgmii-id"; > pio-handle = < &pio2 >; > diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/ > boot/dts/mpc8568mds.dts > index 5439437..cf45aab 100644 > --- a/arch/powerpc/boot/dts/mpc8568mds.dts > +++ b/arch/powerpc/boot/dts/mpc8568mds.dts > @@ -333,8 +333,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <0>; > - tx-clock = <20>; > + rx-clock-name = "none"; > + tx-clock-name = "clk16"; > pio-handle = <&pio1>; > phy-handle = <&phy0>; > phy-connection-type = "rgmii-id"; > @@ -355,8 +355,8 @@ > */ > mac-address = [ 00 00 00 00 00 00 ]; > local-mac-address = [ 00 00 00 00 00 00 ]; > - rx-clock = <0>; > - tx-clock = <20>; > + rx-clock-name = "none"; > + tx-clock-name = "clk16"; > pio-handle = <&pio2>; > phy-handle = <&phy1>; > phy-connection-type = "rgmii-id"; > diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c > index a3ff270..a93342e 100644 > --- a/drivers/net/ucc_geth.c > +++ b/drivers/net/ucc_geth.c > @@ -3814,6 +3814,7 @@ static int ucc_geth_probe(struct of_device* > ofdev, const struct of_device_id *ma > int err, ucc_num, max_speed = 0; > const phandle *ph; > const unsigned int *prop; > + const char *sprop; > const void *mac_addr; > phy_interface_t phy_interface; > static const int enet_to_speed[] = { > @@ -3846,10 +3847,56 @@ static int ucc_geth_probe(struct of_device* > ofdev, const struct of_device_id *ma > > ug_info->uf_info.ucc_num = ucc_num; > > - prop = of_get_property(np, "rx-clock", NULL); > - ug_info->uf_info.rx_clock = *prop; > - prop = of_get_property(np, "tx-clock", NULL); > - ug_info->uf_info.tx_clock = *prop; > + sprop = of_get_property(np, "rx-clock-name", NULL); > + if (sprop) { > + ug_info->uf_info.rx_clock = qe_clock_source(sprop); > + if ((ug_info->uf_info.rx_clock < QE_CLK_NONE) || > + (ug_info->uf_info.rx_clock > QE_CLK24)) { > + printk(KERN_ERR > + "ucc_geth: invalid rx-clock-name property\n"); > + return -EINVAL; > + } > + } else { > + prop = of_get_property(np, "rx-clock", NULL); > + if (!prop) { > + /* If both rx-clock-name and rx-clock are missing, > + we want to tell people to use rx-clock-name. */ > + printk(KERN_ERR > + "ucc_geth: missing rx-clock-name property\n"); > + return -EINVAL; > + } > + if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { > + printk(KERN_ERR > + "ucc_geth: invalid rx-clock propperty\n"); > + return -EINVAL; > + } > + ug_info->uf_info.rx_clock = *prop; > + } > + > + sprop = of_get_property(np, "tx-clock-name", NULL); > + if (sprop) { > + ug_info->uf_info.tx_clock = qe_clock_source(sprop); > + if ((ug_info->uf_info.tx_clock < QE_CLK_NONE) || > + (ug_info->uf_info.tx_clock > QE_CLK24)) { > + printk(KERN_ERR > + "ucc_geth: invalid tx-clock-name property\n"); > + return -EINVAL; > + } > + } else { > + prop = of_get_property(np, "rx-clock", NULL); > + if (!prop) { > + printk(KERN_ERR > + "ucc_geth: mising tx-clock-name property\n"); > + return -EINVAL; > + } > + if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { > + printk(KERN_ERR > + "ucc_geth: invalid tx-clock property\n"); > + return -EINVAL; > + } > + ug_info->uf_info.tx_clock = *prop; > + } > + > err = of_address_to_resource(np, 0, &res); > if (err) > return -EINVAL; > -- > 1.5.2.4 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties 2007-12-14 5:07 ` Kumar Gala @ 2007-12-14 6:45 ` Jeff Garzik 0 siblings, 0 replies; 8+ messages in thread From: Jeff Garzik @ 2007-12-14 6:45 UTC (permalink / raw) To: Kumar Gala; +Cc: netdev, Timur Tabi, linuxppc-dev list Kumar Gala wrote: > > On Dec 3, 2007, at 3:17 PM, Timur Tabi wrote: > >> Updates the ucc_geth device driver to check the new rx-clock-name and >> tx-clock-name properties first. If present, it uses the new function >> qe_clock_source() to obtain the clock source. Otherwise, it checks the >> deprecated rx-clock and tx-clock properties. >> >> Update the device trees for 832x, 836x, and 8568 to contain the new >> property >> names only. >> >> Signed-off-by: Timur Tabi <timur@freescale.com> >> --- >> >> This patch applies to Kumar's for-2.6.25 branch. ucc_geth will >> compile but not >> run if my other patch, "qe: add function qe_clock_source" has not also >> been >> applied. > > Jeff, I'll take this patch via powerpc.git if you don't have any issue > since its just touching probe/setup bits. ACK ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi 2007-12-12 15:19 ` Timur Tabi 2007-12-14 5:07 ` Kumar Gala @ 2007-12-14 7:19 ` Kumar Gala 2 siblings, 0 replies; 8+ messages in thread From: Kumar Gala @ 2007-12-14 7:19 UTC (permalink / raw) To: Timur Tabi; +Cc: netdev, linuxppc-dev On Dec 3, 2007, at 3:17 PM, Timur Tabi wrote: > Updates the ucc_geth device driver to check the new rx-clock-name and > tx-clock-name properties first. If present, it uses the new function > qe_clock_source() to obtain the clock source. Otherwise, it checks > the > deprecated rx-clock and tx-clock properties. > > Update the device trees for 832x, 836x, and 8568 to contain the new > property > names only. > > Signed-off-by: Timur Tabi <timur@freescale.com> > --- > > This patch applies to Kumar's for-2.6.25 branch. ucc_geth will > compile but not > run if my other patch, "qe: add function qe_clock_source" has not > also been > applied. > > arch/powerpc/boot/dts/mpc832x_mds.dts | 8 ++-- > arch/powerpc/boot/dts/mpc832x_rdb.dts | 8 ++-- > arch/powerpc/boot/dts/mpc836x_mds.dts | 8 ++-- > arch/powerpc/boot/dts/mpc8568mds.dts | 8 ++-- > drivers/net/ucc_geth.c | 55 ++++++++++++++++++++++++ > ++++++-- > 5 files changed, 67 insertions(+), 20 deletions(-) applied. - k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] qe: add function qe_clock_source() 2007-12-03 21:17 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi @ 2007-12-12 15:19 ` Timur Tabi 1 sibling, 0 replies; 8+ messages in thread From: Timur Tabi @ 2007-12-12 15:19 UTC (permalink / raw) To: galak; +Cc: netdev, linuxppc-dev Timur Tabi wrote: > Add function qe_clock_source() which takes a string containing the name of a > QE clock source (as is typically found in device trees) and returns the > matching enum qe_clock value. > > Update booting-without-of.txt to indicate that the UCC properties rx-clock > and tx-clock are deprecated and replaced with rx-clock-name and tx-clock-name, > which use strings instead of numbers to indicate QE clock sources. > > Signed-off-by: Timur Tabi <timur@freescale.com> If there are no objections, I'd like this patch to be pulled into 2.6.25. Thanks. -- Timur Tabi Linux kernel developer at Freescale ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-12-14 7:19 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-12-03 21:17 [PATCH 0/2] QE clock source improvements Timur Tabi 2007-12-03 21:17 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi 2007-12-03 21:17 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi 2007-12-12 15:19 ` Timur Tabi 2007-12-14 5:07 ` Kumar Gala 2007-12-14 6:45 ` Jeff Garzik 2007-12-14 7:19 ` Kumar Gala 2007-12-12 15:19 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).