From: Jon Loeliger <jdl@freescale.com>
To: ppcdev <linuxppc-dev@ozlabs.org>
Subject: [PATCH] POWERPC: Convert StorCenter DTS file to /dts-v1/ format.
Date: Fri, 25 Jan 2008 16:36:47 -0600 [thread overview]
Message-ID: <479A647F.7090300@freescale.com> (raw)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/boot/dts/storcenter.dts | 73 +++++++++++++++++----------------
1 files changed, 38 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index 6aa1d69..2204874 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -11,6 +11,8 @@
* warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
model = "StorCenter";
compatible = "storcenter";
@@ -30,19 +32,19 @@
PowerPC,8241@0 {
device_type = "cpu";
reg = <0>;
- clock-frequency = <d# 200000000>; /* Hz */
- timebase-frequency = <d# 25000000>; /* Hz */
+ clock-frequency = <200000000>;
+ timebase-frequency = <25000000>;
bus-frequency = <0>; /* from bootwrapper */
- i-cache-line-size = <d# 32>; /* bytes */
- d-cache-line-size = <d# 32>; /* bytes */
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
};
};
memory {
device_type = "memory";
- reg = <00000000 04000000>; /* 64MB @ 0x0 */
+ reg = <0x00000000 0x04000000>; /* 64MB @ 0x0 */
};
soc@fc000000 {
@@ -51,15 +53,15 @@
device_type = "soc";
compatible = "fsl,mpc8241", "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
- ranges = <0 fc000000 100000>;
- reg = <fc000000 100000>; /* EUMB */
+ ranges = <0x0 0xfc000000 0x100000>;
+ reg = <0xfc000000 0x100000>; /* EUMB */
bus-frequency = <0>; /* fixed by loader */
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
+ reg = <0x3000 0x100>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
@@ -73,9 +75,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 20>;
- clock-frequency = <d# 97553800>; /* Hz */
- current-speed = <d# 115200>;
+ reg = <0x4500 0x20>;
+ clock-frequency = <97553800>; /* Hz */
+ current-speed = <115200>;
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
@@ -84,10 +86,10 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 20>;
- clock-frequency = <d# 97553800>; /* Hz */
- current-speed = <d# 9600>;
- interrupts = <a 2>;
+ reg = <0x4600 0x20>;
+ clock-frequency = <97553800>; /* Hz */
+ current-speed = <9600>;
+ interrupts = <10 2>;
interrupt-parent = <&mpic>;
};
@@ -96,7 +98,7 @@
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
};
};
@@ -107,28 +109,29 @@
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
- reg = <fe800000 1000>;
- ranges = <01000000 0 0 fe000000 0 00c00000
- 02000000 0 80000000 80000000 0 70000000>;
- bus-range = <0 ff>;
- clock-frequency = <d# 97553800>; /* Hz */
+ reg = <0xfe800000 0x1000>;
+ ranges = <0x01000000 0x0 0x0 0xfe000000 0x0 0x00c00000
+ 0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+ bus-range = <0 0xff>;
+ clock-frequency = <97553800>;
interrupt-parent = <&mpic>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 13 - IDE */
- 6800 0 0 1 &mpic 0 1
- 6800 0 0 2 &mpic 0 1
- 6800 0 0 3 &mpic 0 1
+ 0x6800 0 0 1 &mpic 0 1
+ 0x6800 0 0 2 &mpic 0 1
+ 0x6800 0 0 3 &mpic 0 1
+ 0x6800 0 0 4 &mpic 0 1
/* IDSEL 14 - USB */
- 7000 0 0 1 &mpic 0 1
- 7000 0 0 2 &mpic 0 1
- 7000 0 0 3 &mpic 0 1
- 7000 0 0 4 &mpic 0 1
+ 0x7000 0 0 1 &mpic 0 1
+ 0x7000 0 0 2 &mpic 0 1
+ 0x7000 0 0 3 &mpic 0 1
+ 0x7000 0 0 4 &mpic 0 1
/* IDSEL 15 - ETH */
- 7800 0 0 1 &mpic 0 1
- 7800 0 0 2 &mpic 0 1
- 7800 0 0 3 &mpic 0 1
- 7800 0 0 4 &mpic 0 1
+ 0x7800 0 0 1 &mpic 0 1
+ 0x7800 0 0 2 &mpic 0 1
+ 0x7800 0 0 3 &mpic 0 1
+ 0x7800 0 0 4 &mpic 0 1
>;
};
--
1.5.2.1.126.g6abd0
next reply other threads:[~2008-01-26 1:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-25 22:36 Jon Loeliger [this message]
2008-01-28 14:46 ` [PATCH] POWERPC: Convert StorCenter DTS file to /dts-v1/ format Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=479A647F.7090300@freescale.com \
--to=jdl@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).