From: Sean MacLennan <smaclennan@pikatech.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: LinuxPPC-dev <linuxppc-dev@ozlabs.org>, i2c@lm-sensors.org
Subject: Re: [PATCH 2/2] i2c-ibm_iic driver
Date: Fri, 15 Feb 2008 23:11:12 -0500 [thread overview]
Message-ID: <47B66260.8010902@pikatech.com> (raw)
In-Reply-To: <20080214094516.1b958ae4@hyperion.delvare>
Here is the of platform patch. I removed the retries and removed the spaces used for spacing.
Cheers,
Sean
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
---
--- old-i2c-ibm_iic.c 2008-02-15 23:01:58.000000000 -0500
+++ i2c-ibm_iic.c 2008-02-15 23:00:44.000000000 -0500
@@ -6,6 +6,9 @@
* Copyright (c) 2003, 2004 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
* Based on original work by
* Ian DaSilva <idasilva@mvista.com>
* Armin Kuster <akuster@mvista.com>
@@ -39,12 +42,17 @@
#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
+
+#ifdef CONFIG_IBM_OCP
#include <asm/ocp.h>
#include <asm/ibm4xx.h>
+#else
+#include <linux/of_platform.h>
+#endif
#include "i2c-ibm_iic.h"
-#define DRIVER_VERSION "2.1"
+#define DRIVER_VERSION "2.2"
MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
MODULE_LICENSE("GPL");
@@ -657,6 +665,7 @@
return (u8)((opb + 9) / 10 - 1);
}
+#ifdef CONFIG_IBM_OCP
/*
* Register single IIC interface
*/
@@ -830,3 +839,188 @@
module_init(iic_init);
module_exit(iic_exit);
+#else
+/*
+ * Register single IIC interface
+ */
+static int __devinit iic_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ static int index = 0;
+ struct device_node *np = ofdev->node;
+ struct ibm_iic_private* dev;
+ struct i2c_adapter* adap;
+ const u32 *indexp, *freq;
+ int ret;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR "ibm-iic: failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ /* This assumes we don't mix index and non-index entries. */
+ indexp = of_get_property(np, "index", NULL);
+ dev->idx = indexp ? *indexp : index++;
+
+ dev_set_drvdata(&ofdev->dev, dev);
+
+ dev->vaddr = of_iomap(np, 0);
+ if (dev->vaddr == NULL) {
+ printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n",
+ dev->idx);
+ ret = -ENXIO;
+ goto fail1;
+ }
+
+ init_waitqueue_head(&dev->wq);
+
+ if (iic_force_poll)
+ dev->irq = NO_IRQ;
+ else {
+ dev->irq = irq_of_parse_and_map(np, 0);
+ if (dev->irq == NO_IRQ)
+ printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+ else {
+ /* Disable interrupts until we finish initialization,
+ assumes level-sensitive IRQ setup...
+ */
+ iic_interrupt_mode(dev, 0);
+ if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
+ printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
+ dev->idx, dev->irq);
+ /* Fallback to the polling mode */
+ dev->irq = NO_IRQ;
+ }
+ }
+ }
+
+ if (dev->irq == NO_IRQ)
+ printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
+ dev->idx);
+
+ /* Board specific settings */
+ if (iic_force_fast || of_get_property(np, "fast-mode", NULL))
+ dev->fast_mode = 1;
+ else
+ dev->fast_mode = 0;
+
+ /* clckdiv is the same for *all* IIC interfaces, but I'd rather
+ * make a copy than introduce another global. --ebs
+ */
+ freq = of_get_property(np, "clock-frequency", NULL);
+ if (freq == NULL) {
+ freq = of_get_property(np->parent, "clock-frequency", NULL);
+ if (freq == NULL) {
+ printk(KERN_ERR "ibm-iic%d: Unable to get bus frequency\n",
+ dev->idx);
+ ret = -EBUSY;
+ goto fail;
+ }
+ }
+
+ dev->clckdiv = iic_clckdiv(*freq);
+ DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
+
+ /* Initialize IIC interface */
+ iic_dev_init(dev);
+
+ /* Register it with i2c layer */
+ adap = &dev->adap;
+ adap->dev.parent = &ofdev->dev;
+ strcpy(adap->name, "IBM IIC");
+ i2c_set_adapdata(adap, dev);
+ adap->id = I2C_HW_OCP;
+ adap->class = I2C_CLASS_HWMON;
+ adap->algo = &iic_algo;
+ adap->client_register = NULL;
+ adap->client_unregister = NULL;
+ adap->timeout = 1;
+ adap->nr = dev->idx;
+
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret < 0) {
+ printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n",
+ dev->idx);
+ goto fail;
+ }
+
+ printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
+ dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+
+ return 0;
+
+fail:
+ if (dev->irq != NO_IRQ){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ }
+
+ iounmap(dev->vaddr);
+fail1:
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(dev);
+ return ret;
+}
+
+/*
+ * Cleanup initialized IIC interface
+ */
+static int __devexit iic_remove(struct of_device *ofdev)
+{
+ struct ibm_iic_private* dev = dev_get_drvdata(&ofdev->dev);
+
+ BUG_ON(dev == NULL);
+ if (i2c_del_adapter(&dev->adap)){
+ printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n",
+ dev->idx);
+ /* That's *very* bad, just shutdown IRQ ... */
+ if (dev->irq != NO_IRQ){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ dev->irq = NO_IRQ;
+ }
+ } else {
+ if (dev->irq != NO_IRQ){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ }
+ iounmap(dev->vaddr);
+ kfree(dev);
+ }
+
+ return 0;
+}
+
+
+static const struct of_device_id ibm_iic_match[] =
+{
+ { .compatible = "ibm,iic-405ex", },
+ { .compatible = "ibm,iic-405gp", },
+ { .compatible = "ibm,iic-440gp", },
+ { .compatible = "ibm,iic-440gpx", },
+ { .compatible = "ibm,iic-440grx", },
+ {}
+};
+
+static struct of_platform_driver ibm_iic_driver =
+{
+ .name = "ibm-iic",
+ .match_table = ibm_iic_match,
+ .probe = iic_probe,
+ .remove = iic_remove,
+};
+
+static int __init ibm_iic_init(void)
+{
+ printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
+ return of_register_platform_driver(&ibm_iic_driver);
+}
+module_init(ibm_iic_init);
+
+static void __exit ibm_iic_exit(void)
+{
+ of_unregister_platform_driver(&ibm_iic_driver);
+}
+module_exit(ibm_iic_exit);
+#endif
next prev parent reply other threads:[~2008-02-16 4:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-09 17:05 [PATCH] i2c-ibm_iic driver Sean MacLennan
[not found] ` <47A14E23.50807@pikatech.com>
[not found] ` <20080214094516.1b958ae4@hyperion.delvare>
2008-02-16 4:07 ` [PATCH 1/2] " Sean MacLennan
2008-02-16 8:20 ` Jean Delvare
2008-02-16 4:11 ` Sean MacLennan [this message]
2008-02-16 9:31 ` [PATCH 2/2] " Jean Delvare
2008-02-16 20:54 ` Sean MacLennan
2008-02-17 10:52 ` Jean Delvare
2008-02-19 1:42 ` Sean MacLennan
2008-02-19 8:23 ` Jean Delvare
2008-02-19 8:59 ` Stefan Roese
2008-02-19 22:23 ` Sean MacLennan
2008-02-19 22:55 ` Arnd Bergmann
2008-02-19 23:18 ` Sean MacLennan
2008-02-19 23:41 ` Stephen Rothwell
2008-02-19 23:54 ` Arnd Bergmann
2008-02-20 6:57 ` Jean Delvare
2008-02-19 21:58 ` Sean MacLennan
2008-02-20 7:20 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47B66260.8010902@pikatech.com \
--to=smaclennan@pikatech.com \
--cc=i2c@lm-sensors.org \
--cc=khali@linux-fr.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).