From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <agust@denx.de>
Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9])
	by ozlabs.org (Postfix) with ESMTP id E585CDE3C7
	for <linuxppc-dev@ozlabs.org>; Fri, 21 Mar 2008 02:42:25 +1100 (EST)
Message-ID: <47E281B6.20702@denx.de>
Date: Thu, 20 Mar 2008 16:24:38 +0100
From: Anatolij Gustschin <agust@denx.de>
MIME-Version: 1.0
To: Wolfgang Grandegger <wg@grandegger.com>
Subject: Re: Oops with TQM5200 on TQM5200
References: <47E2723D.1090101@grandegger.com>
In-Reply-To: <47E2723D.1090101@grandegger.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Cc: linuxppc-dev@ozlabs.org
List-Id: Linux on PowerPC Developers Mail List <linuxppc-dev.ozlabs.org>
List-Unsubscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-dev>,
	<mailto:linuxppc-dev-request@ozlabs.org?subject=unsubscribe>
List-Archive: <http://ozlabs.org/pipermail/linuxppc-dev>
List-Post: <mailto:linuxppc-dev@ozlabs.org>
List-Help: <mailto:linuxppc-dev-request@ozlabs.org?subject=help>
List-Subscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-dev>,
	<mailto:linuxppc-dev-request@ozlabs.org?subject=subscribe>

Hello Wolfgang,

Wolfgang Grandegger wrote:

> I just tried Linux 2.6.25-rc6 on my TQM5200 module and got the attached
> oops. Are there any known patches fixing the problems?

try the patch below for tqm5200.dts, rebuild dtb and boot
again. Not sure if it works for Linux 2.6.25-rc6, but for
2.6.25-rc3 it does.

Anatolij
--
 diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f..7c23bb3 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -83,6 +83,7 @@
 		};
 
 		dma-controller@1200 {
+			device_type = "dma-controller";
 			compatible = "fsl,mpc5200-bestcomm";
 			reg = <1200 80>;
 			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
@@ -127,10 +128,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0:ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		ata@3a00 {