From: Jochen Friedrich <jochen@scram.de>
To: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "Kernel, Linux" <linux-kernel@vger.kernel.org>,
linuxppc-dev list <linuxppc-dev@ozlabs.org>,
Linux I2C <i2c@lm-sensors.org>,
Scott Wood <scottwood@freescale.com>,
Jean Delvare <khali@linux-fr.org>
Subject: [PATCH] [POWERPC] Add i2c pins to dts and board setup
Date: Sat, 10 May 2008 17:50:29 +0200 [thread overview]
Message-ID: <4825C445.4020004@scram.de> (raw)
Initialize I2C pins on boards with CPM1/CPM2 controllers.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc866ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc885ads.dts | 10 ++++++++++
arch/powerpc/platforms/82xx/mpc8272_ads.c | 4 ++++
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 ++++
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 3 +++
6 files changed, 41 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da3..57abcc1 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,16 @@
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
+
+ i2c@11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c",
+ "fsl,cpm-i2c";
+ reg = <11860 20 8afc 2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <29600000>;
+ };
};
PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c..84c190e 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,16 @@
fsl,cpm-command = <0000>;
linux,network-index = <1>;
};
+
+ i2c@860 {
+ compatible = "fsl,mpc866-i2c",
+ "fsl,cpm1-i2c",
+ "fsl,cpm-i2c";
+ reg = <860 20 3c80 30>;
+ interrupts = <10>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0010>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043..67d0e8d 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,16 @@
fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
+
+ i2c@860 {
+ compatible = "fsl,mpc885-i2c",
+ "fsl,cpm1-i2c",
+ "fsl,cpm-i2c";
+ reg = <860 20 3c80 30>;
+ interrupts = <10>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0010>;
+ };
};
};
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 7d30187..8054c68 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[] = {
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index c028a5b..caaec29 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] = {
{CPM_PORTD, 13, CPM_PIN_OUTPUT},
{CPM_PORTD, 14, CPM_PIN_OUTPUT},
{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 6e7ded0..45ed6cd 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] = {
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
#endif
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
--
1.5.5.1
next reply other threads:[~2008-05-10 15:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-10 15:50 Jochen Friedrich [this message]
2008-05-13 16:46 ` [PATCH] [POWERPC] Add i2c pins to dts and board setup Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2008-05-21 10:31 Jochen Friedrich
2008-05-21 15:10 ` Scott Wood
2008-05-21 16:17 ` Jochen Friedrich
2008-07-02 16:06 [PATCH] powerpc: " Jochen Friedrich
2008-07-02 16:14 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4825C445.4020004@scram.de \
--to=jochen@scram.de \
--cc=avorontsov@ru.mvista.com \
--cc=i2c@lm-sensors.org \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).