From: Fabio Tosetto <tosettofabio83@libero.it>
To: Andre Schwarz <andre.schwarz@matrix-vision.de>
Cc: linux-ppc list <linuxppc-dev@ozlabs.org>
Subject: Re: slow MMC over SPI
Date: Tue, 03 Jun 2008 07:54:30 +0200 [thread overview]
Message-ID: <4844DC96.6060807@libero.it> (raw)
In-Reply-To: <4843AD1C.4010901@matrix-vision.de>
Hello,
I am trying to enable the SD over SPI on a emebedded system with one
processor powerpc mpc5200b; you have enabled mmc over spi into a native
spi or psc spi?
regards,
Fabio
Andre Schwarz ha scritto:
> All,
>
> has anybody made some investigations about performance of a SD/MMC card
> on SPI ?
>
> Actually I'm using various cards (different speed classes) on an SPI bus
> of a MPC8343 cpu.
> Everything is working fine basically, i.e. card is detected properly and
> block device can be mounted and used.
>
> SPI clock is adjusted to the card's capabilities and is running quite
> fast (>30MHz).
>
> But between consecutive reads/writes there's a fixed gap of 2us thus
> yielding a poor performance of approx. 300KBytes/sec.
> The spi bus is utilized only ~10%.
>
> Any ideas where this comes from ?
> Ist it a fixed delay regarding to some kind of spec or is it possibly a
> spi driver/mmc layer issue ?
>
>
> regards,
> Andre Schwarz
>
> MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090
> Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
> .
>
>
next prev parent reply other threads:[~2008-06-03 5:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-02 8:19 slow MMC over SPI Andre Schwarz
2008-06-03 5:54 ` Fabio Tosetto [this message]
2008-06-03 7:39 ` André Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4844DC96.6060807@libero.it \
--to=tosettofabio83@libero.it \
--cc=andre.schwarz@matrix-vision.de \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).