From: Marco Stornelli <marco.stornelli@coritel.it>
To: Misbah khan <misbah_khan@engineer.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Concern regarding Booting up of linux board ...
Date: Thu, 05 Jun 2008 14:32:24 +0200 [thread overview]
Message-ID: <4847DCD8.2040102@coritel.it> (raw)
In-Reply-To: <17668657.post@talk.nabble.com>
Misbah khan ha scritto:
>
>
> Misbah khan wrote:
>> Hi all ..
>>
>> we are using IMX-31 (ARM Core) processor with Linux 2.6 and redboot as
>> boot loader with jffs2 for NAND flash and facing the concerned problem :-
>>
>> The board is booting fine but it sometimes takes 21 sec to boot and
>> sometimes takes 31 sec to boot which is a concern for us actually it takes
>> usually 21 sec and 31 sec sometimes
>>
>> If we remove the power after booting and again insert the power supply It
>> gives the following warning message related to jffs2 ....
>>
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dec00: read 0x2464ba56, calculated 0x474915f8.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x0112be00: read 0x149efa32, calculated 0x8f32b0eb.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x0112ba00: read 0xdcfafeb2, calculated 0xb86eb888.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e8600: read 0x20bed1fc, calculated 0xe9509808.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e9200: read 0x6e4f40bd, calculated 0x28248aa4.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e8e00: read 0x6e4f40bd, calculated 0x59eaeede.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011df000: read 0x6e4f40bd, calculated 0xbf916037.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dde00: read 0x6e4f40bd, calculated 0x946d0599.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dc800: read 0x6e4f40bd, calculated 0x1e890eaa.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x008c0200: read 0xd3ad877b, calculated 0xf4f0b5f9.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x0097b800: read 0x8d0623a1, calculated 0xefce6ce7.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x00965200: read 0x8d0623a1, calculated 0x92a2a227.
>>
>> Having never experienced this before i do believe that this could be the
>> jffs2 related concern hence just thinking of using YAFFS to increase the
>> booting effeciency ...
>>
>>
>> I would remain thankful if any of you could share your experience or
>> thaught regarding this ...
>>
>> Thank you
>> Misbah <><
>>
>
>
> Thank you for your reply ....
>
> This is not related to ARM processor specific rather its a generic problem
> related to booting of Board Hence need for your help ...
>
> Misbah <><
>
Ok but for this mailing list a generic problem related to booting of a
board is off-topic. You can certainly find a mailing list about JFFS2.
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
marco.stornelli@coritel.it
+39 06 72582838
prev parent reply other threads:[~2008-06-05 12:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-05 8:49 Concern regarding Booting up of linux board Misbah khan
2008-06-05 12:04 ` Josh Boyer
2008-06-05 12:26 ` Misbah khan
2008-06-05 12:32 ` Marco Stornelli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4847DCD8.2040102@coritel.it \
--to=marco.stornelli@coritel.it \
--cc=linuxppc-embedded@ozlabs.org \
--cc=misbah_khan@engineer.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).