From: Wolfgang Grandegger <wg@grandegger.com>
To: Linuxppc-dev@ozlabs.org
Subject: [PATCH] booting-without-of: add more bindings for FSL UPM driver
Date: Mon, 09 Jun 2008 10:42:10 +0200 [thread overview]
Message-ID: <484CECE2.9050605@grandegger.com> (raw)
This patch adds the bindings for the property "chip-delay" used by
the patch "[NAND] driver extension to support NAND on TQM85xx modules"
posted to this list a few minutes ago:
http://ozlabs.org/pipermail/linuxppc-dev/2008-June/057632.html
Note: this patch is based on the following patches from Anton
Vorontsov posted to this list some time ago:
http://ozlabs.org/pipermail/linuxppc-dev/2008-May/056531.html
http://ozlabs.org/pipermail/linuxppc-dev/2008-June/057244.html
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---
Documentation/powerpc/booting-without-of.txt | 1 +
1 file changed, 1 insertion(+)
Index: linux-2.6-galak/Documentation/powerpc/booting-without-of.txt
===================================================================
--- linux-2.6-galak.orig/Documentation/powerpc/booting-without-of.txt
+++ linux-2.6-galak/Documentation/powerpc/booting-without-of.txt
@@ -3007,6 +3007,7 @@ platforms are moved over to use the flat
- reg : should specify localbus chip select and size used for the chip.
- fsl,upm-addr-offset : UPM pattern offset for the address latch.
- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
+ - chip-delay : may specify a delay value in milliseconds.
- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
Example:
next reply other threads:[~2008-06-09 8:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 8:42 Wolfgang Grandegger [this message]
2008-06-09 10:30 ` [PATCH] booting-without-of: add more bindings for FSL UPM driver Segher Boessenkool
2008-06-09 15:19 ` Wolfgang Grandegger
2008-06-09 23:47 ` Segher Boessenkool
2008-06-12 8:10 ` Wolfgang Grandegger
2008-06-26 13:07 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=484CECE2.9050605@grandegger.com \
--to=wg@grandegger.com \
--cc=Linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).