From: Nathan Fontenot <nfont@austin.ibm.com>
To: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>,
linuxppc-dev@ozlabs.org, paulus@samba.org,
David Darrington <ddarring@linux.vnet.ibm.com>
Subject: Re: [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines
Date: Mon, 16 Jun 2008 11:07:33 -0500 [thread overview]
Message-ID: <48568FC5.9020406@austin.ibm.com> (raw)
In-Reply-To: <20080612220858.GI30916@linux.vnet.ibm.com>
Split the retrieval and setting of processor entitlement and weight into
helper routines. This also removes the printing of the raw values
returned from h_get_ppp, the values are already parsed and printed.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
---
arch/powerpc/kernel/lparcfg.c | 163
++++++++++++++++++++++--------------------
1 file changed, 86 insertions(+), 77 deletions(-)
Index: linux-2.6.git/arch/powerpc/kernel/lparcfg.c
===================================================================
--- linux-2.6.git.orig/arch/powerpc/kernel/lparcfg.c 2008-06-16
10:22:42.000000000 -0500
+++ linux-2.6.git/arch/powerpc/kernel/lparcfg.c 2008-06-16
10:32:29.000000000 -0500
@@ -167,7 +167,8 @@
return rc;
}
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned int h_pic(unsigned long *pool_idle_time,
+ unsigned long *num_procs)
{
unsigned long rc;
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -176,6 +177,53 @@
*pool_idle_time = retbuf[0];
*num_procs = retbuf[1];
+
+ return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+ unsigned long h_entitled, h_unallocated;
+ unsigned long h_aggregation, h_resource;
+ int rc;
+
+ rc = h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
+ &h_resource);
+ if (rc)
+ return;
+
+ seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
+ seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
+ seq_printf(m, "system_active_processors=%ld\n",
+ (h_resource >> 0 * 8) & 0xffff);
+
+ /* pool related entries are apropriate for shared configs */
+ if (lppaca[0].shared_proc) {
+ unsigned long pool_idle_time, pool_procs;
+
+ seq_printf(m, "pool=%ld\n", (h_aggregation >> 0 * 8) & 0xffff);
+
+ /* report pool_capacity in percentage */
+ seq_printf(m, "pool_capacity=%ld\n",
+ ((h_resource >> 2 * 8) & 0xffff) * 100);
+
+ rc = h_pic(&pool_idle_time, &pool_procs);
+ if (! rc) {
+ seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+ seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+ }
+ }
+
+ seq_printf(m, "unallocated_capacity_weight=%ld\n",
+ (h_resource >> 4 * 8) & 0xFF);
+
+ seq_printf(m, "capacity_weight=%ld\n", (h_resource >> 5 * 8) & 0xFF);
+ seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
+ seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
}
#define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -302,59 +350,11 @@
partition_active_processors = lparcfg_count_active_processors();
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
- unsigned long h_entitled, h_unallocated;
- unsigned long h_aggregation, h_resource;
- unsigned long pool_idle_time, pool_procs;
- unsigned long purr;
-
- h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
- &h_resource);
-
- seq_printf(m, "R4=0x%lx\n", h_entitled);
- seq_printf(m, "R5=0x%lx\n", h_unallocated);
- seq_printf(m, "R6=0x%lx\n", h_aggregation);
- seq_printf(m, "R7=0x%lx\n", h_resource);
-
- purr = get_purr();
-
/* this call handles the ibm,get-system-parameter contents */
parse_system_parameter_string(m);
+ parse_ppp_data(m);
- seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
- seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
- seq_printf(m, "system_active_processors=%ld\n",
- (h_resource >> 0 * 8) & 0xffff);
-
- /* pool related entries are apropriate for shared configs */
- if (lppaca[0].shared_proc) {
-
- h_pic(&pool_idle_time, &pool_procs);
-
- seq_printf(m, "pool=%ld\n",
- (h_aggregation >> 0 * 8) & 0xffff);
-
- /* report pool_capacity in percentage */
- seq_printf(m, "pool_capacity=%ld\n",
- ((h_resource >> 2 * 8) & 0xffff) * 100);
-
- seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
- seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
- }
-
- seq_printf(m, "unallocated_capacity_weight=%ld\n",
- (h_resource >> 4 * 8) & 0xFF);
-
- seq_printf(m, "capacity_weight=%ld\n",
- (h_resource >> 5 * 8) & 0xFF);
-
- seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
- seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
- seq_printf(m, "purr=%ld\n", purr);
+ seq_printf(m, "purr=%ld\n", get_purr());
} else { /* non SPLPAR case */
@@ -382,6 +382,41 @@
return 0;
}
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+ unsigned long current_entitled;
+ unsigned long dummy;
+ unsigned long resource;
+ u8 current_weight, new_weight;
+ u64 new_entitled;
+ ssize_t retval;
+
+ /* Get our current parameters */
+ retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource);
+ if (retval)
+ return retval;
+
+ current_weight = (resource >> 5 * 8) & 0xFF;
+
+ if (entitlement) {
+ new_weight = current_weight;
+ new_entitled = *entitlement;
+ } else if (weight) {
+ new_weight = *weight;
+ new_entitled = current_entitled;
+ } else
+ return -EINVAL;
+
+ pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+ __FUNCTION__, current_entitled, current_weight);
+
+ pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+ __FUNCTION__, new_entitled, new_weight);
+
+ retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+ return retval;
+}
+
/*
* Interface for changing system parameters (variable capacity weight
* and entitled capacity). Format of input is "param_name=value";
@@ -399,12 +434,6 @@
char *tmp;
u64 new_entitled, *new_entitled_ptr = &new_entitled;
u8 new_weight, *new_weight_ptr = &new_weight;
-
- unsigned long current_entitled; /* parameters for h_get_ppp */
- unsigned long dummy;
- unsigned long resource;
- u8 current_weight;
-
ssize_t retval = -ENOMEM;
if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
@@ -432,33 +461,17 @@
*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
if (endp == tmp)
goto out;
- new_weight_ptr = ¤t_weight;
+
+ retval = update_ppp(new_entitled_ptr, NULL);
} else if (!strcmp(kbuf, "capacity_weight")) {
char *endp;
*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
if (endp == tmp)
goto out;
- new_entitled_ptr = ¤t_entitled;
- } else
- goto out;
- /* Get our current parameters */
- retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource);
- if (retval) {
- retval = -EIO;
+ retval = update_ppp(NULL, new_weight_ptr);
+ } else
goto out;
- }
-
- current_weight = (resource >> 5 * 8) & 0xFF;
-
- pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __func__, current_entitled, current_weight);
-
- pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __func__, *new_entitled_ptr, *new_weight_ptr);
-
- retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
- *new_weight_ptr);
if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
retval = count;
next prev parent reply other threads:[~2008-06-16 16:07 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-12 21:53 [PATCH 00/19] powerpc: pSeries Cooperative Memory Overcommitment support Robert Jennings
2008-06-12 22:08 ` [PATCH 01/19] powerpc: Remove extraneous error reporting for hcall failures in lparcfg Robert Jennings
2008-06-12 22:08 ` [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines Robert Jennings
2008-06-13 0:23 ` Stephen Rothwell
2008-06-13 19:11 ` Nathan Fontenot
2008-06-16 16:07 ` Nathan Fontenot [this message]
2008-06-12 22:09 ` [PATCH 03/19] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg Robert Jennings
2008-06-16 16:09 ` [PATCH 03/19][v2] " Nathan Fontenot
2008-06-16 20:47 ` [PATCH 03/19][v3] " Nathan Fontenot
2008-06-24 14:23 ` Brian King
2008-06-24 15:26 ` [PATCH 03/19] " Nathan Fontenot
2008-06-12 22:11 ` [PATCH 04/19] powerpc: Split retrieval of processor entitlement data into a helper routine Robert Jennings
2008-06-12 22:11 ` [PATCH 05/19] powerpc: Enable CMO feature during platform setup Robert Jennings
2008-06-12 22:12 ` [PATCH 06/19] powerpc: Utilities to set firmware page state Robert Jennings
2008-06-12 22:13 ` [PATCH 07/19] powerpc: Add collaborative memory manager Robert Jennings
2008-06-12 22:13 ` [PATCH 08/19] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled Robert Jennings
2008-06-12 22:14 ` [PATCH 09/19] powerpc: Add CMO paging statistics Robert Jennings
2008-06-12 22:15 ` [PATCH 10/19] powerpc: move get_longbusy_msecs out of ehca/ehea Robert Jennings
2008-06-12 22:18 ` [PATCH 10/19] [repost] " Robert Jennings
2008-06-13 18:24 ` Brian King
2008-06-13 19:55 ` Jeff Garzik
2008-06-12 22:19 ` [PATCH 11/19] powerpc: iommu enablement for CMO Robert Jennings
2008-06-13 1:43 ` Olof Johansson
2008-06-20 15:03 ` Robert Jennings
2008-06-20 15:12 ` [PATCH 11/19][v2] " Robert Jennings
2008-06-12 22:19 ` [PATCH 12/19] powerpc: vio bus support " Robert Jennings
2008-06-13 5:12 ` Stephen Rothwell
2008-06-23 20:23 ` Robert Jennings
2008-06-23 20:25 ` [PATCH 12/19][v2] " Robert Jennings
2008-06-12 22:21 ` [PATCH 13/19] powerpc: Verify CMO memory entitlement updates with virtual I/O Robert Jennings
2008-06-12 22:21 ` [PATCH 14/19] powerpc: hvc enablement for CMO Robert Jennings
2008-06-12 22:22 ` [PATCH 15/19] powerpc: hvcs " Robert Jennings
2008-06-12 22:22 ` [PATCH 16/19] ibmveth: Automatically enable larger rx buffer pools for larger mtu Robert Jennings
2008-06-13 5:18 ` Stephen Rothwell
2008-06-23 20:21 ` [PATCH 16/19][v2] " Robert Jennings
2008-06-12 22:23 ` [PATCH 17/19] ibmveth: enable driver for CMO Robert Jennings
2008-06-13 5:25 ` Stephen Rothwell
2008-06-23 20:20 ` [PATCH 17/19][v2] " Robert Jennings
2008-06-12 22:24 ` [PATCH 18/19] ibmvscsi: driver enablement " Robert Jennings
2008-06-13 18:30 ` Brian King
2008-06-12 22:31 ` [PATCH 19/19] powerpc: Update arch vector to indicate support " Robert Jennings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48568FC5.9020406@austin.ibm.com \
--to=nfont@austin.ibm.com \
--cc=brking@linux.vnet.ibm.com \
--cc=ddarring@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=rcj@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).