From: Joel Schopp <jschopp@austin.ibm.com>
To: Michael Neuling <mikey@neuling.org>
Cc: linuxppc-dev@ozlabs.org, Paul Mackerras <paulus@samba.org>
Subject: Re: [PATCH 6/9] powerpc: Add VSX CPU feature
Date: Wed, 18 Jun 2008 11:28:22 -0500 [thread overview]
Message-ID: <485937A6.1000205@austin.ibm.com> (raw)
In-Reply-To: <20080618004734.1A41370297@localhost.localdomain>
A couple of these lines originated with me.
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Michael Neuling wrote:
> Add a VSX CPU feature. Also add code to detect if VSX is available
> from the device tree.
>
> Signed-off-by: Michael Neuling <mikey@neuling.org>
> ---
>
> arch/powerpc/kernel/prom.c | 3 +++
> include/asm-powerpc/cputable.h | 13 +++++++++++++
> 2 files changed, 16 insertions(+)
>
> Index: linux-2.6-ozlabs/arch/powerpc/kernel/prom.c
> ===================================================================
> --- linux-2.6-ozlabs.orig/arch/powerpc/kernel/prom.c
> +++ linux-2.6-ozlabs/arch/powerpc/kernel/prom.c
> @@ -609,6 +609,9 @@ static struct feature_property {
> {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
> {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
> #endif /* CONFIG_ALTIVEC */
> +#ifdef CONFIG_VSX
> + {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
> +#endif /* CONFIG_VSX */
> #ifdef CONFIG_PPC64
> {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
> {"ibm,purr", 1, CPU_FTR_PURR, 0},
> Index: linux-2.6-ozlabs/include/asm-powerpc/cputable.h
> ===================================================================
> --- linux-2.6-ozlabs.orig/include/asm-powerpc/cputable.h
> +++ linux-2.6-ozlabs/include/asm-powerpc/cputable.h
> @@ -27,6 +27,7 @@
> #define PPC_FEATURE_HAS_DFP 0x00000400
> #define PPC_FEATURE_POWER6_EXT 0x00000200
> #define PPC_FEATURE_ARCH_2_06 0x00000100
> +#define PPC_FEATURE_HAS_VSX 0x00000080
>
> #define PPC_FEATURE_TRUE_LE 0x00000002
> #define PPC_FEATURE_PPC_LE 0x00000001
> @@ -181,6 +182,7 @@ extern void do_feature_fixups(unsigned l
> #define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
> #define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000)
> #define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000)
> +#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000)
>
> #ifndef __ASSEMBLY__
>
> @@ -199,6 +201,17 @@ extern void do_feature_fixups(unsigned l
> #define PPC_FEATURE_HAS_ALTIVEC_COMP 0
> #endif
>
> +/* We only set the VSX features if the kernel was compiled with VSX
> + * support
> + */
> +#ifdef CONFIG_VSX
> +#define CPU_FTR_VSX_COMP CPU_FTR_VSX
> +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
> +#else
> +#define CPU_FTR_VSX_COMP 0
> +#define PPC_FEATURE_HAS_VSX_COMP 0
> +#endif
> +
> /* We only set the spe features if the kernel was compiled with spe
> * support
> */
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
next prev parent reply other threads:[~2008-06-18 16:28 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-18 0:47 [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-18 0:47 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-18 19:35 ` Kumar Gala
2008-06-18 22:58 ` Paul Mackerras
2008-06-19 4:13 ` Kumar Gala
2008-06-19 4:30 ` Michael Neuling
2008-06-19 4:22 ` Kumar Gala
2008-06-19 4:35 ` Michael Neuling
2008-06-19 4:58 ` Kumar Gala
2008-06-19 5:37 ` Michael Neuling
2008-06-19 5:47 ` Kumar Gala
2008-06-19 6:01 ` Michael Neuling
2008-06-19 6:10 ` Kumar Gala
2008-06-19 9:33 ` Benjamin Herrenschmidt
2008-06-19 13:24 ` Kumar Gala
2008-06-18 0:47 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-18 0:47 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-18 0:47 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-18 0:47 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-18 14:53 ` Kumar Gala
2008-06-18 23:55 ` Michael Neuling
2008-06-18 0:47 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-18 0:47 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-18 16:28 ` Joel Schopp [this message]
2008-06-19 6:51 ` David Woodhouse
2008-06-19 7:00 ` Michael Neuling
2008-06-18 0:47 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-18 0:47 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-18 13:05 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Kumar Gala
2008-06-18 23:54 ` Michael Neuling
2008-06-20 4:13 ` Michael Neuling
2008-06-20 4:13 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-20 4:13 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-20 6:39 ` Kumar Gala
2008-06-22 11:29 ` Michael Neuling
2008-06-20 4:13 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-20 4:13 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-20 4:13 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-20 4:13 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-20 4:13 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-20 6:44 ` Kumar Gala
2008-06-20 4:13 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-20 6:35 ` Kumar Gala
2008-06-20 4:13 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-20 6:37 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Kumar Gala
2008-06-20 8:15 ` Michael Neuling
2008-06-23 5:31 ` Michael Neuling
2008-06-23 5:31 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-23 5:31 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-23 5:31 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-23 5:31 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-23 5:31 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-23 5:31 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-23 5:31 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-23 5:31 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-23 5:31 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-23 7:38 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-23 7:38 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-23 14:46 ` Kumar Gala
2008-06-23 7:38 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-23 7:38 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-23 7:38 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-23 7:38 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-23 7:38 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-23 7:38 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-23 7:38 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-23 7:38 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-24 10:57 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-24 10:57 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-24 13:47 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-24 14:07 ` Kumar Gala
2008-06-24 16:33 ` Segher Boessenkool
2008-06-25 0:25 ` Michael Neuling
2008-06-24 10:57 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-24 10:57 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-24 10:57 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-24 14:01 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-24 14:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-24 14:06 ` Kumar Gala
2008-06-25 0:06 ` Michael Neuling
2008-06-25 2:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-24 14:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-25 4:07 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-25 4:07 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-25 4:07 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-25 14:08 ` Kumar Gala
2008-06-25 15:34 ` Scott Wood
2008-06-25 16:12 ` Gabriel Paubert
2008-06-25 16:17 ` Scott Wood
2008-06-25 17:07 ` Kumar Gala
2008-06-26 0:09 ` Michael Neuling
2008-06-26 7:07 ` [PATCH] " Michael Neuling
2008-06-26 10:44 ` [PATCH 2/9] " Gabriel Paubert
2008-06-25 17:08 ` Andreas Schwab
2008-06-25 4:07 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-25 4:07 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-25 4:07 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-25 4:07 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-25 4:07 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-25 4:07 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-25 4:07 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=485937A6.1000205@austin.ibm.com \
--to=jschopp@austin.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mikey@neuling.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).