From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <489210F5.5090003@freescale.com> Date: Thu, 31 Jul 2008 14:22:29 -0500 From: Timur Tabi MIME-Version: 1.0 To: Scott Wood Subject: Re: [PATCH] powerpc: i2c-mpc: make speed registers configurable via FDT References: <4889EFFE.2070201@grandegger.com> <4889FD1D.4010804@freescale.com> <20080727012722.GH12191@secretlab.ca> <4891A744.6060005@grandegger.com> <9e4733910807310849g7e5612dbk9536733e061af8ad@mail.gmail.com> <4891F4D8.9090905@grandegger.com> <4891FC3A.7040609@freescale.com> <20080731180959.GA29057@secretlab.ca> <489200B6.9060906@freescale.com> <20080731182810.GB29097@secretlab.ca> <48920607.5040606@freescale.com> <48920C1A.7010605@freescale.com> <48920D9B.5060406@freescale.com> <48920F69.6020909@freescale.com> <48921057.8030807@freescale.com> <489210AF.7000909@freescale.com> In-Reply-To: <489210AF.7000909@freescale.com> Content-Type: text/plain; charset=ISO-8859-1 Cc: Linuxppc-dev@ozlabs.org, Linux I2C List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Scott Wood wrote: > Timur Tabi wrote: >> True, but I'd rather we have a real clock-frequency property that contains the >> calculated I2C input frequency, than a divider. It's more consistent with other >> properties, > > Right, I wasn't saying i2c should be different from serial, pci, etc. > It was more of a side comment about the way we specify clocks in general. I guess it's agreed then. If no one else gets around to it, I'll submit the U-Boot patch for updating the device tree. -- Timur Tabi Linux kernel developer at Freescale