* MPC8313E RDB: Badness at fs/sysfs/dir.c:463
@ 2008-10-14 13:24 Mike Dyer
2008-10-14 14:12 ` Mike Dyer
0 siblings, 1 reply; 8+ messages in thread
From: Mike Dyer @ 2008-10-14 13:24 UTC (permalink / raw)
To: linuxppc-embedded
Hi All,
I've just pulled the 2.6.27 kernel from git and am trying it out on my=20
MPC8313E RDB dev kit. I get the following badness during boot (the=20
complete boot record is attached later) :
------------[ cut here=20
]------------ =
=
=20
Badness at=20
fs/sysfs/dir.c:463 =
=
=20
NIP: c00c5b54 LR: c00c5b3c CTR:=20
00000000 =
=20
REGS: c7827d90 TRAP: 0700 Not tainted =20
(2.6.27) =
=20
MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER:=20
20000000 =
=20
TASK =3D c7816400[1] 'swapper' THREAD:=20
c7826000 =
=20
GPR00: c00c5b3c c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570=20
00000000 =
=20
GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000=20
00000000 =
=20
GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035c76c c035c740=20
c7ace610 =
=20
GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00=20
c7827e58 =
=20
Call=20
Trace: =
=
=20
[c7827e40] [c00c5b3c] 0xc00c5b3c=20
(unreliable) =
=20
[c7827e50] [c00c6dc4]=20
0xc00c6dc4 =
=
=20
[c7827e80] [c0182d94]=20
0xc0182d94 =
=
=20
[c7827ea0] [c0181590]=20
0xc0181590 =
=
=20
[c7827ef0] [c0213a6c]=20
0xc0213a6c =
=
=20
[c7827f00] [c0009818]=20
0xc0009818 =
=
=20
[c7827f10] [c00098c0]=20
0xc00098c0 =
=
=20
[c7827f30] [c0009a30]=20
0xc0009a30 =
=
=20
[c7827f50] [c032a1d4]=20
0xc032a1d4 =
=
=20
[c7827f60] [c0003874]=20
0xc0003874 =
=
=20
[c7827fd0] [c031517c]=20
0xc031517c =
=
=20
[c7827ff0] [c001216c]=20
0xc001216c =
=
=20
Instruction=20
dump: =
=
=20
912b0028 4bffffbc 9421fff0 7c0802a6 90010014 4bffff2d 2f83ffef=20
419e0014 =
=20
80010014 38210010 7c0803a6 4e800020 <0fe00000> 4bffffec 9421ffe0=20
7c0802a6 =20
I used the mpc8313e_rdb_defconfig, with the exception of enabling more=20
debug.
Any help - not sure where to start... ?
Cheers,
Mike
Complete boot sequence:
Using MPC831x RDB machine=20
description =
=
=20
Linux version 2.6.27 (mike@mike-linux.provision-comm.com) (gcc version=20
4.2.4) #2 Tue Oct 14 14:04:03 BST=20
2008 =20
Found initrd at=20
0xc7cf0000:0xc7f2e337 =
=
=20
console [udbg0]=20
enabled =
=
=20
setup_arch:=20
bootmem =
=
=20
mpc831x_rdb_setup_arch() =
=
=20
Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus=20
number:=20
0->0 =
=20
PCI host bridge /sleep-nexus/pci@e0008500 (primary)=20
ranges: =
=20
MEM 0x0000000090000000..0x000000009fffffff ->=20
0x0000000090000000 =
=20
MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000=20
Prefetch =
=20
IO 0x00000000e2000000..0x00000000e20fffff ->=20
0x0000000000000000 =
=20
arch:=20
exit =
=
=20
Zone PFN=20
ranges: =
=
=20
DMA 0x00000000 ->=20
0x00008000 =
=
=20
Normal 0x00008000 ->=20
0x00008000 =
=
=20
Movable zone start PFN for each=20
node =
=20
early_node_map[1] active PFN=20
ranges =
=20
0: 0x00000000 ->=20
0x00008000 =
=
=20
Built 1 zonelists in Zone order, mobility grouping on. Total pages:=20
32512 =
=20
Kernel command line: root=3D/dev/ram0 rw console=3DttyS0,115200=20
mtdparts=3De2800000.flash:560k(u-boot),80k(u-boot-env),2m(kernel),16k(dtb=
),-(root) =20
IPIC (128 IRQ sources) at=20
fdefa700 =
=
=20
PID hash table entries: 512 (order: 9, 2048=20
bytes) =
=20
clocksource: timebase mult[6000002] shift[22]=20
registered =
=20
Dentry cache hash table entries: 16384 (order: 4, 65536=20
bytes) =
=20
Inode-cache hash table entries: 8192 (order: 3, 32768=20
bytes) =
=20
Memory: 123844k/131072k available (3364k kernel code, 7080k reserved,=20
132k data, 98k bss, 208k=20
init) =
=20
SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-3, MinObjects=3D0, CPUs=3D1,=
=20
Nodes=3D1 =
=20
Calibrating delay loop... 83.20 BogoMIPS=20
(lpj=3D166400) =
=20
Mount-cache hash table entries:=20
512 =
=20
net_namespace: 288=20
bytes =
=
=20
NET: Registered protocol family=20
16 =
=20
=
=
=20
PCI: Probing PCI=20
hardware =
=
=20
pci 0000:00:00.0: PME# supported from D0 D1 D2=20
D3hot =
=20
pci 0000:00:00.0: PME#=20
disabled =
=
=20
bus: 00 index 0 io port: [0,=20
fffff] =
=20
bus: 00 index 1 mmio: [90000000,=20
9fffffff] =
=20
bus: 00 index 2 mmio: [80000000,=20
8fffffff] =
=20
SCSI subsystem=20
initialized =
=
=20
usbcore: registered new interface driver=20
usbfs =
=20
usbcore: registered new interface driver=20
hub =
=20
usbcore: registered new device driver=20
usb =
=20
NET: Registered protocol family=20
2 =
=20
IP route cache hash table entries: 1024 (order: 0, 4096=20
bytes) =
=20
TCP established hash table entries: 4096 (order: 3, 32768=20
bytes) =
=20
TCP bind hash table entries: 4096 (order: 2, 16384=20
bytes) =
=20
TCP: Hash tables configured (established 4096 bind=20
4096) =
=20
TCP reno=20
registered =
=
=20
NET: Registered protocol family=20
1 =
=20
checking if image is initramfs...it isn't (no cpio magic); looks like an=20
initrd =
=20
Freeing initrd memory: 2296k=20
freed =
=20
------------[ cut here=20
]------------ =
=
=20
Badness at=20
fs/sysfs/dir.c:463 =
=
=20
NIP: c00c5b54 LR: c00c5b3c CTR:=20
00000000 =
=20
REGS: c7827d90 TRAP: 0700 Not tainted =20
(2.6.27) =
=20
MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER:=20
20000000 =
=20
TASK =3D c7816400[1] 'swapper' THREAD:=20
c7826000 =
=20
GPR00: c00c5b3c c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570=20
00000000 =
=20
GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000=20
00000000 =
=20
GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035c76c c035c740=20
c7ace610 =
=20
GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00=20
c7827e58 =
=20
Call=20
Trace: =
=
=20
[c7827e40] [c00c5b3c] 0xc00c5b3c=20
(unreliable) =
=20
[c7827e50] [c00c6dc4]=20
0xc00c6dc4 =
=
=20
[c7827e80] [c0182d94]=20
0xc0182d94 =
=
=20
[c7827ea0] [c0181590]=20
0xc0181590 =
=
=20
[c7827ef0] [c0213a6c]=20
0xc0213a6c =
=
=20
[c7827f00] [c0009818]=20
0xc0009818 =
=
=20
[c7827f10] [c00098c0]=20
0xc00098c0 =
=
=20
[c7827f30] [c0009a30]=20
0xc0009a30 =
=
=20
[c7827f50] [c032a1d4]=20
0xc032a1d4 =
=
=20
[c7827f60] [c0003874]=20
0xc0003874 =
=
=20
[c7827fd0] [c031517c]=20
0xc031517c =
=
=20
[c7827ff0] [c001216c]=20
0xc001216c =
=
=20
Instruction=20
dump: =
=
=20
912b0028 4bffffbc 9421fff0 7c0802a6 90010014 4bffff2d 2f83ffef=20
419e0014 =
=20
80010014 38210010 7c0803a6 4e800020 <0fe00000> 4bffffec 9421ffe0=20
7c0802a6 =
=20
JFFS2 version 2.2. (NAND) \ufffd=A9 2001-2006 Red Hat,=20
Inc. =
=20
msgmni has been set to=20
246 =
=
=20
io scheduler noop=20
registered =
=
=20
io scheduler anticipatory registered=20
(default) =
=20
io scheduler deadline=20
registered =
=
=20
io scheduler cfq=20
registered =
=
=20
Serial: 8250/16550 driver4 ports, IRQ sharing=20
disabled =
=20
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq =3D 16) is a=20
16550A =
=20
console handover: boot [udbg0] -> real=20
[ttyS0] =
=20
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq =3D 17) is a=20
16550A =
=20
brd: module=20
loaded =
=
=20
loop: module=20
loaded =
=
=20
Gianfar MII Bus:=20
probed =
=
=20
eth0: Gianfar Ethernet Controller Version 1.2,=20
00:e0:0c:00:95:01 =
=20
eth0: Running with NAPI=20
enabled =
=
=20
eth0: 256/256 RX/TX BD ring=20
size =
=
=20
eth1: Gianfar Ethernet Controller Version 1.2,=20
00:e0:0c:00:95:02 =
=20
eth1: Running with NAPI=20
enabled =
=
=20
eth1: 256/256 RX/TX BD ring=20
size =
=
=20
e100: Intel(R) PRO/100 Network Driver,=20
3.5.23-k4-NAPI =
=20
e100: Copyright(c) 1999-2006 Intel=20
Corporation =
=20
fe000000.flash: Found 1 x16 devices at 0x0 in 16-bit=20
bank =
=20
Amd/Fujitsu Extended Query Table at=20
0x0040 =
=20
fe000000.flash: Swapping erase regions for broken CFI=20
table. =
=20
number of CFI chips:=20
1 =
=
=20
cfi_cmdset_0002: Disabling erase-suspend-program due to code=20
brokenness. =
=20
cmdlinepart partition parsing not=20
available =
=20
RedBoot partition parsing not=20
available =
=20
NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB=20
3,3V=20
8-bit) =
=20
cmdlinepart partition parsing not=20
available =
=20
RedBoot partition parsing not=20
available =
=20
Creating 3 MTD partitions on=20
"e2800000.flash": =
=20
0x00000000-0x00100000 :=20
"u-boot" =
=
=20
0x00100000-0x00400000 :=20
"kernel" =
=
=20
0x00400000-0x02000000 :=20
"fs" =
=
=20
eLBC NAND device at 0xe2800000, bank=20
0 =
=20
usbmon: debugfs is not=20
available =
=
=20
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host=20
Controller =
=20
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number=20
1 =
=20
fsl-ehci fsl-ehci.0: irq 38, io base=20
0xe0023000 =
=20
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec=20
2004 =
=20
usb usb1: configuration #1 chosen from 1=20
choice =
=20
hub 1-0:1.0: USB hub=20
found =
=
=20
hub 1-0:1.0: 1 port=20
detected =
=
=20
USB Universal Host Controller Interface driver=20
v3.0 =
=20
Initializing USB Mass Storage=20
driver... =
=20
usbcore: registered new interface driver=20
usb-storage =
=20
USB Mass Storage support=20
registered. =
=
=20
i2c /dev entries=20
driver =
=
=20
rtc-ds1307 0-0068: rtc core: registered ds1339 as=20
rtc0 =
=20
md: linear personality registered for level=20
-1 =
=20
md: raid0 personality registered for level=20
0 =
=20
md: raid1 personality registered for level=20
1 =
=20
TCP cubic=20
registered =
=
=20
NET: Registered protocol family=20
17 =
=20
RPC: Registered udp transport=20
module. =
=20
RPC: Registered tcp transport=20
module. =
=20
rtc-ds1307 0-0068: setting system clock to 2000-01-04 22:45:49 UTC=20
(947025949) =
=20
md: Autodetecting RAID=20
arrays. =
=
=20
md: Scanned 0 and added 0=20
devices. =
=
=20
md: autorun=20
... =
=
=20
md: ... autorun=20
DONE. =
=
=20
RAMDISK: Compressed image found at block=20
0 =
=20
VFS: Mounted root (ext2=20
filesystem). =
=
=20
Freeing unused kernel memory: 208k init
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-14 13:24 MPC8313E RDB: Badness at fs/sysfs/dir.c:463 Mike Dyer
@ 2008-10-14 14:12 ` Mike Dyer
2008-10-14 14:35 ` Kumar Gala
0 siblings, 1 reply; 8+ messages in thread
From: Mike Dyer @ 2008-10-14 14:12 UTC (permalink / raw)
To: linuxppc-embedded
Hi All,
Apologies for the bad formatting of the previous message...
I've just pulled the 2.6.27 kernel from git and am trying it out on my=20
MPC8313E RDB dev kit. I get the following badness during boot (the=20
complete boot record is attached later) :
------------[ cut here ]------------
Badness at fs/sysfs/dir.c:463
NIP: c00c5b54 LR: c00c5b3c CTR: 00000000
REGS: c7827d90 TRAP: 0700 Not tainted (2.6.27)
MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER: 20000000
TASK =3D c7816400[1] 'swapper' THREAD: c7826000
GPR00: c00c5b3c c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570=20
00000000
GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000=20
00000000
GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035c76c c035c740=20
c7ace610
GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00=20
c7827e58
Call Trace:
[c7827e40] [c00c5b3c] 0xc00c5b3c (unreliable)
[c7827e50] [c00c6dc4] 0xc00c6dc4
[c7827e80] [c0182d94] 0xc0182d94
[c7827ea0] [c0181590] 0xc0181590
[c7827ef0] [c0213a6c] 0xc0213a6c
[c7827f00] [c0009818] 0xc0009818
[c7827f10] [c00098c0] 0xc00098c0
[c7827f30] [c0009a30] 0xc0009a30
[c7827f50] [c032a1d4] 0xc032a1d4
[c7827f60] [c0003874] 0xc0003874
[c7827fd0] [c031517c] 0xc031517c
[c7827ff0] [c001216c] 0xc001216c
Instruction dump:
912b0028 4bffffbc 9421fff0 7c0802a6 90010014 4bffff2d 2f83ffef 419e0014
80010014 38210010 7c0803a6 4e800020 <0fe00000> 4bffffec 9421ffe0 7c0802a6
I used the mpc8313e_rdb_defconfig, with the exception of enabling more=20
debug.
Any help - not sure where to start... ?
Cheers,
Mike
Complete boot sequence:
Using MPC831x RDB machine description
Linux version 2.6.27 (mike@mike-linux.provision-comm.com) (gcc version=20
4.2.4) #2 Tue Oct 14 14:04:03 BST 2008
Found initrd at 0xc7cf0000:0xc7f2e337
console [udbg0] enabled
setup_arch: bootmem
mpc831x_rdb_setup_arch()
Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus=20
number: 0->0
PCI host bridge /sleep-nexus/pci@e0008500 (primary) ranges:
MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Prefetc=
h
IO 0x00000000e2000000..0x00000000e20fffff -> 0x0000000000000000
arch: exit
Zone PFN ranges:
DMA 0x00000000 -> 0x00008000
Normal 0x00008000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3251=
2
Kernel command line: root=3D/dev/ram0 rw console=3DttyS0,115200=20
mtdparts=3De2800000.flash:560k(u-boot),80k(u-boot-env),2m(kernel),16k(dtb=
),-(root)
IPIC (128 IRQ sources) at fdefa700
PID hash table entries: 512 (order: 9, 2048 bytes)
clocksource: timebase mult[6000002] shift[22] registered
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 123844k/131072k available (3364k kernel code, 7080k reserved,=20
132k data, 98k bss, 208k init)
SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-3, MinObjects=3D0, CPUs=3D1,=
Nodes=3D1
Calibrating delay loop... 83.20 BogoMIPS (lpj=3D166400)
Mount-cache hash table entries: 512
net_namespace: 288 bytes
NET: Registered protocol family 16
=20
PCI: Probing PCI hardware
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
bus: 00 index 0 io port: [0, fffff]
bus: 00 index 1 mmio: [90000000, 9fffffff]
bus: 00 index 2 mmio: [80000000, 8fffffff]
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an=20
initrd
Freeing initrd memory: 2296k freed
------------[ cut here ]------------
Badness at fs/sysfs/dir.c:463
NIP: c00c5b54 LR: c00c5b3c CTR: 00000000
REGS: c7827d90 TRAP: 0700 Not tainted (2.6.27)
MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER: 20000000
TASK =3D c7816400[1] 'swapper' THREAD: c7826000
GPR00: c00c5b3c c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570=20
00000000
GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000=20
00000000
GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035c76c c035c740=20
c7ace610
GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00=20
c7827e58
Call Trace:
[c7827e40] [c00c5b3c] 0xc00c5b3c (unreliable)
[c7827e50] [c00c6dc4] 0xc00c6dc4
[c7827e80] [c0182d94] 0xc0182d94
[c7827ea0] [c0181590] 0xc0181590
[c7827ef0] [c0213a6c] 0xc0213a6c
[c7827f00] [c0009818] 0xc0009818
[c7827f10] [c00098c0] 0xc00098c0
[c7827f30] [c0009a30] 0xc0009a30
[c7827f50] [c032a1d4] 0xc032a1d4
[c7827f60] [c0003874] 0xc0003874
[c7827fd0] [c031517c] 0xc031517c
[c7827ff0] [c001216c] 0xc001216c
Instruction dump:
912b0028 4bffffbc 9421fff0 7c0802a6 90010014 4bffff2d 2f83ffef 419e0014
80010014 38210010 7c0803a6 4e800020 <0fe00000> 4bffffec 9421ffe0 7c0802a6
JFFS2 version 2.2. (NAND) =A9 2001-2006 Red Hat, Inc.
msgmni has been set to 246
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq =3D 16) is a 16550A
console handover: boot [udbg0] -> real [ttyS0]
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq =3D 17) is a 16550A
brd: module loaded
loop: module loaded
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:95:01
eth0: Running with NAPI enabled
eth0: 256/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:95:02
eth1: Running with NAPI enabled
eth1: 256/256 RX/TX BD ring size
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
fe000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
fe000000.flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB=20
3,3V 8-bit)
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 3 MTD partitions on "e2800000.flash":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00400000 : "kernel"
0x00400000-0x02000000 : "fs"
eLBC NAND device at 0xe2800000, bank 0
usbmon: debugfs is not available
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 38, io base 0xe0023000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
rtc-ds1307 0-0068: rtc core: registered ds1339 as rtc0
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
rtc-ds1307 0-0068: setting system clock to 2000-01-04 22:45:49 UTC=20
(947025949)
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 208k init
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-14 14:12 ` Mike Dyer
@ 2008-10-14 14:35 ` Kumar Gala
2008-10-15 10:06 ` Mike Dyer
0 siblings, 1 reply; 8+ messages in thread
From: Kumar Gala @ 2008-10-14 14:35 UTC (permalink / raw)
To: Mike Dyer; +Cc: linuxppc-embedded
On Oct 14, 2008, at 9:12 AM, Mike Dyer wrote:
> Hi All,
>
> Apologies for the bad formatting of the previous message...
>
> I've just pulled the 2.6.27 kernel from git and am trying it out on
> my MPC8313E RDB dev kit. I get the following badness during boot
> (the complete boot record is attached later) :
can you enable kernel symbols in your build (CONFIG_KALLSYMS)
- k
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-14 14:35 ` Kumar Gala
@ 2008-10-15 10:06 ` Mike Dyer
2008-10-28 15:53 ` Mike Dyer
0 siblings, 1 reply; 8+ messages in thread
From: Mike Dyer @ 2008-10-15 10:06 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-embedded
Hi Kumar,
On Tue, 2008-10-14 at 09:35 -0500, Kumar Gala wrote:
> On Oct 14, 2008, at 9:12 AM, Mike Dyer wrote:
>
> > Hi All,
> >
> > Apologies for the bad formatting of the previous message...
> >
> > I've just pulled the 2.6.27 kernel from git and am trying it out on
> > my MPC8313E RDB dev kit. I get the following badness during boot
> > (the complete boot record is attached later) :
>
> can you enable kernel symbols in your build (CONFIG_KALLSYMS)
I can, but it no longer boots... Will keep trying.
I've gone through my system.map and pulled out the call stack, if that
helps. I put a printk in sysfs_add_one, and it appears it is being
called with sd->s_name = 'e00082a8.dma'
> ------------[ cut here ]------------
> Badness at c00c5b50 [verbose debug info unavailable]
> NIP: c00c5b50 LR: c00c5b38 CTR: 00000000
> REGS: c7827d90 TRAP: 0700 Not tainted (2.6.27)
> MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER: 20000000
> TASK = c7816400[1] 'swapper' THREAD: c7826000
> GPR00: c00c5b38 c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570 00000000
> GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000 00000000
> GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035a76c c035a740 c7ace610
> GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00 c7827e58
> Call Trace:
> [c7827e40] [c00c5b38] 0xc00c5b38 (unreliable) sysfs_add_one
> [c7827e50] [c00c6dc0] 0xc00c6dc0 sysfs_do_create_link
> [c7827e80] [c0182d40] 0xc0182d40 bus_add_device
> [c7827ea0] [c018153c] 0xc018153c device_add
> [c7827ef0] [c0213a14] 0xc0213a14 of_device_register
> [c7827f00] [c0009818] 0xc0009818 of_platform_device_create
> [c7827f10] [c00098c0] 0xc00098c0 of_platform_bus_create
> [c7827f30] [c0009a30] 0xc0009a30 of_platform_bus_probe
> [c7827f50] [c03281d4] 0xc03281d4 __machine_initcall_mpc831x_rdb_declare_of_platform_devices
> [c7827f60] [c0003874] 0xc0003874 do_one_initcall
> [c7827fd0] [c031317c] 0xc031317c kernel_init
> [c7827ff0] [c001216c] 0xc001216c kernel_thread
>
> - k
Cheers,
Mike
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-15 10:06 ` Mike Dyer
@ 2008-10-28 15:53 ` Mike Dyer
2008-10-28 16:12 ` Scott Wood
0 siblings, 1 reply; 8+ messages in thread
From: Mike Dyer @ 2008-10-28 15:53 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-embedded
Hi,
On Wed, 2008-10-15 at 11:06 +0100, Mike Dyer wrote:
> Hi Kumar,
>
> On Tue, 2008-10-14 at 09:35 -0500, Kumar Gala wrote:
> > On Oct 14, 2008, at 9:12 AM, Mike Dyer wrote:
> >
> > > Hi All,
> > >
> > > Apologies for the bad formatting of the previous message...
> > >
> > > I've just pulled the 2.6.27 kernel from git and am trying it out on
> > > my MPC8313E RDB dev kit. I get the following badness during boot
> > > (the complete boot record is attached later) :
> >
> > can you enable kernel symbols in your build (CONFIG_KALLSYMS)
>
> I can, but it no longer boots... Will keep trying.
>
> I've gone through my system.map and pulled out the call stack, if that
> helps. I put a printk in sysfs_add_one, and it appears it is being
> called with sd->s_name = 'e00082a8.dma'
I believe the DMA is being added twice, because it occurs twice within the mpc8313erdb.dts device tree. Once by itself, and once within a sleep-nexus.
Is that right / normal ?
> > ------------[ cut here ]------------
> > Badness at c00c5b50 [verbose debug info unavailable]
> > NIP: c00c5b50 LR: c00c5b38 CTR: 00000000
> > REGS: c7827d90 TRAP: 0700 Not tainted (2.6.27)
> > MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER: 20000000
> > TASK = c7816400[1] 'swapper' THREAD: c7826000
> > GPR00: c00c5b38 c7827e40 c7816400 ffffffef c7800e5c c7800b7c c7811570 00000000
> > GPR08: 000001a0 c0370000 00000048 00000000 82044048 100b224c 07ffb000 00000000
> > GPR16: 07ff09e0 07ff94c8 00000000 00000000 00000000 c035a76c c035a740 c7ace610
> > GPR24: 00000000 00000000 00000000 00000001 c7811570 fffffffe c7acdc00 c7827e58
> > Call Trace:
> > [c7827e40] [c00c5b38] 0xc00c5b38 (unreliable) sysfs_add_one
> > [c7827e50] [c00c6dc0] 0xc00c6dc0 sysfs_do_create_link
> > [c7827e80] [c0182d40] 0xc0182d40 bus_add_device
> > [c7827ea0] [c018153c] 0xc018153c device_add
> > [c7827ef0] [c0213a14] 0xc0213a14 of_device_register
> > [c7827f00] [c0009818] 0xc0009818 of_platform_device_create
> > [c7827f10] [c00098c0] 0xc00098c0 of_platform_bus_create
> > [c7827f30] [c0009a30] 0xc0009a30 of_platform_bus_probe
> > [c7827f50] [c03281d4] 0xc03281d4 __machine_initcall_mpc831x_rdb_declare_of_platform_devices
> > [c7827f60] [c0003874] 0xc0003874 do_one_initcall
> > [c7827fd0] [c031317c] 0xc031317c kernel_init
> > [c7827ff0] [c001216c] 0xc001216c kernel_thread
>
> >
> > - k
>
> Cheers,
> Mike
>
Cheers,
Mike
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-28 15:53 ` Mike Dyer
@ 2008-10-28 16:12 ` Scott Wood
2008-10-28 19:38 ` Joaquin Luna
0 siblings, 1 reply; 8+ messages in thread
From: Scott Wood @ 2008-10-28 16:12 UTC (permalink / raw)
To: Mike Dyer; +Cc: linuxppc-embedded
Mike Dyer wrote:
> I believe the DMA is being added twice, because it occurs twice within the mpc8313erdb.dts device tree. Once by itself, and once within a sleep-nexus.
>
> Is that right / normal ?
No, that looks like a mismerge. There should only be the node under
sleep-nexus.
-Scott
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-28 16:12 ` Scott Wood
@ 2008-10-28 19:38 ` Joaquin Luna
2008-10-28 20:45 ` Scott Wood
0 siblings, 1 reply; 8+ messages in thread
From: Joaquin Luna @ 2008-10-28 19:38 UTC (permalink / raw)
To: Scott Wood, Mike Dyer; +Cc: linuxppc-embedded
I am having the same problem with badness at fs/sysfs/dir.c on the
MPC8313ERDB. More importantly my custom board based on this development
board will not boot past "loading device tree." Are there any other
mismerges in this file? If we fix the dts file how do we fix the
official dts file and when would that fix be put in place?
- Joaquin Luna
-----Original Message-----
From: linuxppc-embedded-bounces+joaquin.luna=3Djdsu.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+joaquin.luna=3Djdsu.com@ozlabs.org] On
Behalf Of Scott Wood
Sent: Tuesday, October 28, 2008 12:13 PM
To: Mike Dyer
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
Mike Dyer wrote:
> I believe the DMA is being added twice, because it occurs twice within
the mpc8313erdb.dts device tree. Once by itself, and once within a
sleep-nexus.
>=20
> Is that right / normal ?
No, that looks like a mismerge. There should only be the node under=20
sleep-nexus.
-Scott
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8313E RDB: Badness at fs/sysfs/dir.c:463
2008-10-28 19:38 ` Joaquin Luna
@ 2008-10-28 20:45 ` Scott Wood
0 siblings, 0 replies; 8+ messages in thread
From: Scott Wood @ 2008-10-28 20:45 UTC (permalink / raw)
To: Joaquin Luna; +Cc: linuxppc-embedded
Joaquin Luna wrote:
> I am having the same problem with badness at fs/sysfs/dir.c on the
> MPC8313ERDB. More importantly my custom board based on this development
> board will not boot past "loading device tree."
That's probably unrelated.
> Are there any other
> mismerges in this file?
Not that I know of.
> If we fix the dts file how do we fix the
> official dts file
With a patch.
> and when would that fix be put in place?
When the patch is applied. :-)
-Scott
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-10-28 20:46 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-14 13:24 MPC8313E RDB: Badness at fs/sysfs/dir.c:463 Mike Dyer
2008-10-14 14:12 ` Mike Dyer
2008-10-14 14:35 ` Kumar Gala
2008-10-15 10:06 ` Mike Dyer
2008-10-28 15:53 ` Mike Dyer
2008-10-28 16:12 ` Scott Wood
2008-10-28 19:38 ` Joaquin Luna
2008-10-28 20:45 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).