From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4926C8C2.60802@freescale.com> Date: Fri, 21 Nov 2008 08:42:10 -0600 From: Jon Loeliger MIME-Version: 1.0 To: nanda Subject: Re: Re :Re: [Ltib] ltib error -linux2.6.20.6 with MPC8360E MDS References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: Linuxppc-dev@ozlabs.org, Ltib@nongnu.org, seh@zee2.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , nanda wrote: > Hi Stuart, > Thanks for the information. gpp access was resolved. > I was successful in building the linux 2.6.11 using the ltib and able > to bring up the MPC8360 EMDS. > But, I still face the problem for linux kernel 2.6.19 and 2.6.20. When > I tried using ltib in the bringing up the board. > The MPC 8360 board keeps rebooting after downloading the image Power > PC Kernel Image(uImage) and Power PC RAMDisk > Image(rootfs.ext2.gz.uboot) build by the "ltib" > Please clarrify on the same. > I'm not a kernel expert and don't know what failure you are seeing here, but I might observe that 2.6.19 and .20 are two years old, and 2.6.11 is more than 3 years old. If you think we, collectively, haven't improved things in that time period, please, complain about 2.6.11, .19, and .20. If on the off chance you think things *might* have gotten better due to a *bit* of development effort over the past three years, you might try installing a modern U-Boot and a modern Kernel. Thanks, jdl