From: Andre Schwarz <andre.schwarz@matrix-vision.de>
To: Timur Tabi <timur@freescale.com>
Cc: linuxppc-dev@ozlabs.org, afleming@freescale.com, netdev@vger.kernel.org
Subject: Re: "eth1: Could not attach to PHY" on MPC8349e-MITX
Date: Thu, 04 Dec 2008 18:41:54 +0100 [thread overview]
Message-ID: <49381662.2020302@matrix-vision.de> (raw)
In-Reply-To: <ed82fe3e0812040915i696e99bep75a37b0e38154415@mail.gmail.com>
Timur,
is it possible that the PHY adress doesn't match the one specified in
the dts ?
regards,
Andre
Timur Tabi schrieb:
> The Freescale MPC8349e-MITX reference board has two TSECs, the second
> of which (eth1) is attached to a Vitesse 7385 5-port switch.
>
> Using the latest U-Boot, Kernel, and device tree, I cannot bring up
> eth1. When I try, I get this message:
>
> [root@tintin root]# ifconfig eth1 up
> 0:01 not found
> eth1: Could not attach to PHY
> SIOCSIFFLAGS: No such device
>
> Unfortunately, I don't even know what this means.
>
> I believe my network configuration is correct. Here's what ifconfig
> says about eth1:
>
> eth1 Link encap:Ethernet HWaddr 00:E0:0C:00:8C:02
> inet addr:192.168.2.141 Bcast:192.168.255.255 Mask:255.255.0.0
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Base address:0x4000
>
> eth1 does work in U-boot, so I know it can be made to work (and I know
> the 7385's firmware is uploaded), I just don't know what needs to be
> done in Linux.
>
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
next prev parent reply other threads:[~2008-12-04 17:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-04 17:15 "eth1: Could not attach to PHY" on MPC8349e-MITX Timur Tabi
2008-12-04 17:41 ` Andre Schwarz [this message]
2008-12-04 17:47 ` Timur Tabi
2008-12-04 17:56 ` Anton Vorontsov
2008-12-04 17:56 ` Andre Schwarz
2008-12-04 17:52 ` [PATCH] powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs Anton Vorontsov
2008-12-04 19:18 ` Timur Tabi
2008-12-05 0:48 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49381662.2020302@matrix-vision.de \
--to=andre.schwarz@matrix-vision.de \
--cc=afleming@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).