* 8260 and powerpc with dts
@ 2008-12-12 19:25 jeff angielski
2008-12-12 20:14 ` Scott Wood
0 siblings, 1 reply; 2+ messages in thread
From: jeff angielski @ 2008-12-12 19:25 UTC (permalink / raw)
To: Linuxppc-dev
I am looking to upgrade an old mpc8260 board from 2.4 to 2.6.x and was
looking for a reference to port against. However, I cannot find any
reference to 8260 in the dts files in kernel.org or the DENX kernel.
Is anybody using the latest 2.6.x with the 8260s? After the switch to
the dts implementation?
Is the 8260 arch fully supported in powerpc (as opposed to the old ppc)?
Thanks for any information or guidance...
--
Jeff Angielski
The PTR Group
www.theptrgroup.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 8260 and powerpc with dts
2008-12-12 19:25 8260 and powerpc with dts jeff angielski
@ 2008-12-12 20:14 ` Scott Wood
0 siblings, 0 replies; 2+ messages in thread
From: Scott Wood @ 2008-12-12 20:14 UTC (permalink / raw)
To: jeff angielski; +Cc: Linuxppc-dev
jeff angielski wrote:
> I am looking to upgrade an old mpc8260 board from 2.4 to 2.6.x and was
> looking for a reference to port against. However, I cannot find any
> reference to 8260 in the dts files in kernel.org or the DENX kernel.
>
> Is anybody using the latest 2.6.x with the 8260s? After the switch to
> the dts implementation?
>
> Is the 8260 arch fully supported in powerpc (as opposed to the old ppc)?
There are some 8272 and 8280 boards supported in arch/powerpc
(mpc8272ads, pq2fads, ep8248e); an 8260 board should be similar.
-Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-12-12 20:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-12 19:25 8260 and powerpc with dts jeff angielski
2008-12-12 20:14 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).