From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mlbe2k2.cs.myharris.net (mlbe2k2.cs.myharris.net [137.237.90.89]) by ozlabs.org (Postfix) with ESMTP id 28E05474E2 for ; Wed, 7 Jan 2009 01:44:26 +1100 (EST) Message-ID: <49636E45.4080802@harris.com> Date: Tue, 06 Jan 2009 09:44:21 -0500 From: "Steven A. Falco" MIME-Version: 1.0 To: Benjamin Herrenschmidt Subject: Re: [QUESTION] 440EPx with PCI to PCIe bridge error References: <496268E7.5090907@harris.com> <1231190318.14860.17.camel@pasglop> <49627D33.8030605@harris.com> <1231223634.14860.18.camel@pasglop> In-Reply-To: <1231223634.14860.18.camel@pasglop> Content-Type: text/plain; charset=UTF-8 Cc: "linuxppc-dev@ozlabs.org" List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Benjamin Herrenschmidt wrote: > >> Here is a complete startup log, with debug turned on as you requested. >> This is still against 2.6.27.9, as it will take me a little time to >> build 2.6.28. Hopefully, this log will be useful in the meantime. > > Can you add "debug" to your kernel command line option or send the > output of the "dmesg" command please ? > Here is the output of dmesg: $ dmesg Using Hydra_temp machine description Linux version 2.6.27.9-00045-gcccf182-dirty (sfalco@saf.cs.myharris.net) (gcc version 4.2.2) #135 Mon Jan 5 16:29:11 EST 2009 Found initrd at 0xcfcb7000:0xcff0b885 Found legacy serial port 0 for /plb/opb/serial@ef600300 mem=1ef600300, taddr=1ef600300, irq=0, clk=11059200, speed=115200 Found legacy serial port 1 for /plb/opb/serial@ef600400 mem=1ef600400, taddr=1ef600400, irq=0, clk=11059200, speed=0 Found legacy serial port 2 for /plb/opb/serial@ef600500 mem=1ef600500, taddr=1ef600500, irq=0, clk=11059200, speed=0 Found legacy serial port 3 for /plb/opb/serial@ef600600 mem=1ef600600, taddr=1ef600600, irq=0, clk=11059200, speed=0 console [udbg0] enabled Top of RAM: 0xffff000, Total RAM: 0xffff000 Memory hole size: 0MB Zone PFN ranges: DMA 0x00000000 -> 0x0000ffff Normal 0x0000ffff -> 0x0000ffff Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x0000ffff On node 0 totalpages: 65535 free_area_init_node: node 0, pgdat c03522f0, node_mem_map c040f000 DMA zone: 65023 pages, LIFO batch:15 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65023 Kernel command line: root=/dev/sda3 rw ip=137.237.178.105:137.237.179.31:137.237.178.1:255.255.255.0:hydra_temp:eth0:off panic=1 console=ttyS0,115200 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 PID hash table entries: 1024 (order: 10, 4096 bytes) time_init: decrementer frequency = 666.666660 MHz time_init: processor frequency = 666.666660 MHz clocksource: timebase mult[600000] shift[22] registered clockevent: decrementer mult[aaaa] shift[16] cpu[0] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 253620k/262140k available (3284k kernel code, 8220k reserved, 124k data, 90k bss, 156k init) SLUB: Genslabs=10, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 1331.20 BogoMIPS (lpj=2662400) Mount-cache hash table entries: 512 net_namespace: 288 bytes NET: Registered protocol family 16 PCI host bridge /plb/pci@1ec000000 (primary) ranges: MEM 0x0000000180000000..0x000000018fffffff -> 0x0000000080000000 IO 0x00000001e8000000..0x00000001e80fffff -> 0x0000000000000000 4xx PCI DMA offset set to 0x00000000 PCI: Probing PCI hardware PCI: 0000:00:00.0 reg 14 32bit mmio: [0, 7fffffff] PCI:0000:00:00.0 Resource 1 0000000000000000-000000007fffffff [21208] is unassigned PCI: Hiding 4xx host bridge resources 0000:00:00.0 pci 0000:00:00.0: supports D1 pci 0000:00:0c.0: supports D1 pci 0000:00:0c.0: PME# supported from D0 D1 D3hot pci 0000:00:0c.0: PME# disabled PCI: Fixup bus 0 (PHB) Try to map irq for 0000:00:00.0... pci_busdev_to_OF_node(0,0x0) parent is /plb/pci@1ec000000 result is -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 -> mapped to linux irq 16 Try to map irq for 0000:00:0c.0... pci_busdev_to_OF_node(0,0x60) parent is /plb/pci@1ec000000 result is -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 -> mapped to linux irq 16 PCI: 0000:01:00.0 reg 10 32bit mmio: [80000000, 8007ffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [f0000000, ffffffff] PCI:0000:01:00.0 Resource 0 0000000080000000-000000008007ffff [20200] fixup... PCI:0000:01:00.0 0000000180000000-000000018007ffff PCI:0000:01:00.0 Resource 1 00000000f0000000-00000000ffffffff [20200] fixup... PCI:0000:01:00.0 00000001f0000000-00000001ffffffff PCI: bridge 0000:00:0c.0 32bit mmio: [80000000, 800fffff] PCI: Fixup bus 1 (0000:00:0c.0) PCI:0000:00:0c.0 Bus rsrc 1 0000000080000000-00000000800fffff [200] fixup... PCI:0000:00:0c.0 0000000180000000-00000001800fffff Try to map irq for 0000:01:00.0... pci_busdev_to_OF_node(1,0x0) pci_busdev_to_OF_node(0,0x60) parent is /plb/pci@1ec000000 result is -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 -> mapped to linux irq 16 PCI: PHB (bus 0) bridge rsrc 0: 0000000000000000-00000000000fffff [0x100], parent c0339b40 (PCI IO) PCI: PHB (bus 0) bridge rsrc 1: 0000000180000000-000000018fffffff [0x200], parent c0339b18 (PCI mem) PCI: Assigning unassigned resouces... pci 0000:00:0c.0: BAR 8: can't allocate mem resource [0x180000000-0x18fffffff] pci 0000:01:00.0: BAR 1: can't allocate mem resource [0x1f0000000-0x1ffffffff] pci 0000:01:00.0: BAR 0: can't allocate mem resource [0x180000000-0x18007ffff] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled bus: 00 index 0 io port: [0, fffff] bus: 00 index 1 mmio: [180000000, 18fffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [0, 0] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2386k freed msgmni has been set to 500 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A serial8250.0: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A serial8250.0: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A 1ef600300.serial: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A 1ef600400.serial: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A 1ef600500.serial: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A 1ef600600.serial: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A brd: module loaded PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels ZMII /plb/opb/emac-zmii@ef600d00 initialized RGMII /plb/opb/emac-rgmii@ef601000 initialized with MDIO support /plb/opb/emac-rgmii@ef601000: input 0 in RGMII mode eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:04:d0 eth0: found Marvell 88E1111 Ethernet PHY (0x00) /plb/opb/emac-rgmii@ef601000: input 1 in RGMII mode eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:01:04:d1 eth1: found Marvell 88E1111 Ethernet PHY (0x01) Uniform Multi-Platform E-IDE driver Driver 'sd' needs updating - please use bus_type methods scsi0 : pata_platform ata1: PATA max PIO6 mmio cmd 0x1c1000000 ctl 0x1c1000098 irq 32 ata1.00: ATA-0: SMC01GBFK6E, CF080204, max MWDMA2 ata1.00: 2001888 sectors, multi 0: LBA ata1.00: configured for PIO ata1.00: configured for PIO ata1: EH complete scsi 0:0:0:0: Direct-Access ATA SMC01GBFK6E CF08 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 1fc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 1fc000000.nor_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Creating 9 MTD partitions on "1fc000000.nor_flash": 0x00000000-0x00500000 : "kernel0" 0x00500000-0x00a00000 : "ramdisk0" 0x00a00000-0x00f00000 : "kernel1" 0x00f00000-0x01400000 : "ramdisk1" 0x01400000-0x01900000 : "kernel2" 0x01900000-0x01e00000 : "ramdisk2" 0x03f60000-0x03f80000 : "env0" 0x03f80000-0x03fa0000 : "env1" 0x03fa0000-0x04000000 : "u-boot" spi_ppc4xx_of 1ef600900.spi: driver initialized ppc-of-ehci e0000300.ehci: OF EHCI ppc-of-ehci e0000300.ehci: new USB bus registered, assigned bus number 1 ppc-of-ehci e0000300.ehci: irq 34, io mem 0xe0000300 ppc-of-ehci e0000300.ehci: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OF EHCI usb usb1: Manufacturer: Linux 2.6.27.9-00045-gcccf182-dirty ehci_hcd usb usb1: SerialNumber: PPC-OF USB ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ppc-of-ohci e0000400.usb: OF OHCI ppc-of-ohci e0000400.usb: new USB bus registered, assigned bus number 2 ppc-of-ohci e0000400.usb: irq 35, io mem 0xe0000400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OF OHCI usb usb2: Manufacturer: Linux 2.6.27.9-00045-gcccf182-dirty ohci_hcd usb usb2: SerialNumber: PPC-OF USB Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i2c /dev entries driver rtc-m41t80 0-0068: chip found, driver version 0.05 rtc-m41t80 0-0068: rtc core: registered m41t65 as rtc0 ibm-iic 1ef600700.i2c: using standard (100 kHz) mode ibm-iic 1ef600800.i2c: using standard (100 kHz) mode at24 0-0052: 512 byte 24c04 EEPROM (writable) ad7414 0-0048: chip found TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc-m41t80 0-0068: setting system clock to 2009-01-05 11:33:38 UTC (1231155218) eth0: link is down eth0: link is up, 100 FDX, pause enabled IP-Config: Complete: device=eth0, addr=137.237.178.105, mask=255.255.255.0, gw=137.237.178.1, host=hydra_temp, domain=, nis-domain=(none), bootserver=137.237.179.31, rootserver=137.237.179.31, rootpath= Freeing unused kernel memory: 156k init kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. $ > Cheers, > Ben. > >> Steve >> >> >> U-Boot 2008.10-00079-gebb3412 (Dec 9 2008 - 16:06:05) >> >> CPU: AMCC PowerPC 440EPx Rev. A at 666.666 MHz (PLB=166, OPB=83, EBC=55 MHz) >> Security/Kasumi support >> Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) >> Internal PCI arbiter enabled, PCI async ext clock used >> 32 kB I-Cache 32 kB D-Cache >> Board: Sequoia - AMCC PPC440EPx Evaluation Board, Rev. F, PCI=66 MHz, serial# 7654 >> I2C: ready >> SPI: ready >> DTT: 1 is 27 C >> DRAM: 256 MB >> FLASH: 64 MB >> NAND: 32 MiB >> PCI: Bus Dev VenId DevId Class Int >> 01 00 1172 0004 ff00 43 >> 00 0c 10b5 8112 0604 43 >> In: serial >> Out: serial >> Err: serial >> RTC: ready >> USB: Host(int phy) Device(ext phy) >> Net: ppc_4xx_eth0, ppc_4xx_eth1 >> IDE: Bus 0: OK >> Device 0: PIO mode 4 >> Model: SMC01GBFK6E Firm: CF080204 Ser#: NU0B4000000000102893 >> Type: Hard Disk >> Capacity: 977.4 MB = 0.9 GB (2001888 x 512) >> >> >> >> ========================================================== >> | | >> | Welcome to Hydra | >> | | >> ========================================================== >> >> >> >> Please type "sm" to enter safe-mode. >> >> >> Starting current kernel - please wait. >> Starting previous kernel - please wait. >> Starting safe-mode kernel - please wait. >> ## Booting kernel from Legacy Image at fd400000 ... >> Image Name: Linux-2.6.27.9-00045-gcccf182-di >> Created: 2009-01-05 21:29:41 UTC >> Image Type: PowerPC Linux Kernel Image (gzip compressed) >> Data Size: 1684167 Bytes = 1.6 MB >> Load Address: 00400000 >> Entry Point: 00400454 >> Verifying Checksum ... OK >> ## Loading init Ramdisk from Legacy Image at fd900000 ... >> Image Name: initramfs >> Created: 2008-11-26 15:13:12 UTC >> Image Type: PowerPC Linux RAMDisk Image (gzip compressed) >> Data Size: 2443397 Bytes = 2.3 MB >> Load Address: 00000000 >> Entry Point: 00000000 >> Verifying Checksum ... OK >> Uncompressing Kernel Image ... OK >> Loading Ramdisk to 0fcb7000, end 0ff0b885 ... OK >> CPU clock-frequency <- 0x27bc86a4 (667MHz) >> CPU timebase-frequency <- 0x27bc86a4 (667MHz) >> /plb: clock-frequency <- 9ef21a9 (167MHz) >> /plb/opb: clock-frequency <- 4f790d4 (83MHz) >> /plb/opb/ebc: clock-frequency <- 34fb5e3 (56MHz) >> /plb/opb/serial@ef600300: clock-frequency <- a8c000 (11MHz) >> /plb/opb/serial@ef600400: clock-frequency <- a8c000 (11MHz) >> /plb/opb/serial@ef600500: clock-frequency <- a8c000 (11MHz) >> /plb/opb/serial@ef600600: clock-frequency <- a8c000 (11MHz) >> Memory <- <0x0 0x0 0xffff000> (255MB) >> ENET0: local-mac-address <- 00:10:ec:01:04:d0 >> ENET1: local-mac-address <- 00:10:ec:01:04:d1 >> >> zImage starting: loaded at 0x00400000 (sp: 0x0ff0c300) >> Allocating 0x371974 bytes for kernel ... >> gunzipping (0x00000000 <- 0x0040f000:0x007ac72c)...done 0x35a1e4 bytes >> Using loader supplied ramdisk at 0xfcb7000-0xff0b885 >> initrd head: 0x1f8b0808 >> >> Linux/PowerPC load: root=/dev/sda3 rw ip=137.237.178.105:137.237.179.31:137.237.178.1:255.255.255.0:hydra_temp:eth0:off panic=1 console=ttyS0,115200 >> Finalizing device tree... flat tree at 0x40bf08 >> Using Hydra_temp machine description >> Linux version 2.6.27.9-00045-gcccf182-dirty (sfalco@saf.cs.myharris.net) (gcc version 4.2.2) #135 Mon Jan 5 16:29:11 EST 2009 >> Found initrd at 0xcfcb7000:0xcff0b885 >> console [udbg0] enabled >> setup_arch: bootmem >> arch: exit >> Zone PFN ranges: >> DMA 0x00000000 -> 0x0000ffff >> Normal 0x0000ffff -> 0x0000ffff >> Movable zone start PFN for each node >> early_node_map[1] active PFN ranges >> 0: 0x00000000 -> 0x0000ffff >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65023 >> Kernel command line: root=/dev/sda3 rw ip=137.237.178.105:137.237.179.31:137.237.178.1:255.255.255.0:hydra_temp:eth0:off panic=1 console=ttyS0,115200 >> UIC0 (32 IRQ sources) at DCR 0xc0 >> UIC1 (32 IRQ sources) at DCR 0xd0 >> UIC2 (32 IRQ sources) at DCR 0xe0 >> PID hash table entries: 1024 (order: 10, 4096 bytes) >> clocksource: timebase mult[600000] shift[22] registered >> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) >> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) >> Memory: 253620k/262140k available (3284k kernel code, 8220k reserved, 124k data, 90k bss, 156k init) >> SLUB: Genslabs=10, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 >> Calibrating delay loop... 1331.20 BogoMIPS (lpj=2662400) >> Mount-cache hash table entries: 512 >> net_namespace: 288 bytes >> NET: Registered protocol family 16 >> >> PCI host bridge /plb/pci@1ec000000 (primary) ranges: >> MEM 0x0000000180000000..0x000000018fffffff -> 0x0000000080000000 >> IO 0x00000001e8000000..0x00000001e80fffff -> 0x0000000000000000 >> 4xx PCI DMA offset set to 0x00000000 >> PCI: Probing PCI hardware >> PCI: Hiding 4xx host bridge resources 0000:00:00.0 >> pci 0000:00:0c.0: PME# supported from D0 D1 D3hot >> pci 0000:00:0c.0: PME# disabled >> Try to map irq for 0000:00:00.0... >> pci_busdev_to_OF_node(0,0x0) >> parent is /plb/pci@1ec000000 >> result is >> -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 >> -> mapped to linux irq 16 >> Try to map irq for 0000:00:0c.0... >> pci_busdev_to_OF_node(0,0x60) >> parent is /plb/pci@1ec000000 >> result is >> -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 >> -> mapped to linux irq 16 >> Try to map irq for 0000:01:00.0... >> pci_busdev_to_OF_node(1,0x0) >> pci_busdev_to_OF_node(0,0x60) >> parent is /plb/pci@1ec000000 >> result is >> -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 >> -> mapped to linux irq 16 >> PCI: PHB (bus 0) bridge rsrc 0: 0000000000000000-00000000000fffff [0x100], parent c0339b40 (PCI IO) >> PCI: PHB (bus 0) bridge rsrc 1: 0000000180000000-000000018fffffff [0x200], parent c0339b18 (PCI mem) >> PCI: Assigning unassigned resouces... >> pci 0000:00:0c.0: BAR 8: can't allocate mem resource [0x180000000-0x18fffffff] >> pci 0000:01:00.0: BAR 1: can't allocate mem resource [0x1f0000000-0x1ffffffff] >> pci 0000:01:00.0: BAR 0: can't allocate mem resource [0x180000000-0x18007ffff] >> pci 0000:00:0c.0: PCI bridge, secondary bus 0000:01 >> pci 0000:00:0c.0: IO window: disabled >> pci 0000:00:0c.0: MEM window: disabled >> pci 0000:00:0c.0: PREFETCH window: disabled >> bus: 00 index 0 io port: [0, fffff] >> bus: 00 index 1 mmio: [180000000, 18fffffff] >> bus: 01 index 0 mmio: [0, 0] >> bus: 01 index 1 mmio: [0, 0] >> bus: 01 index 2 mmio: [0, 0] >> bus: 01 index 3 mmio: [0, 0] >> SCSI subsystem initialized >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> NET: Registered protocol family 2 >> IP route cache hash table entries: 2048 (order: 1, 8192 bytes) >> TCP established hash table entries: 8192 (order: 4, 65536 bytes) >> TCP bind hash table entries: 8192 (order: 3, 32768 bytes) >> TCP: Hash tables configured (established 8192 bind 8192) >> TCP reno registered >> NET: Registered protocol family 1 >> checking if image is initramfs... it is >> Freeing initrd memory: 2386k freed >> msgmni has been set to 500 >> io scheduler noop registered >> io scheduler anticipatory registered (default) >> io scheduler deadline registered >> io scheduler cfq registered >> Serial: 8250/16550 driver4 ports, IRQ sharing enabled >> serial8250.0: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A >> console handover: boot [udbg0] -> real [ttyS0] >> serial8250.0: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A >> serial8250.0: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A >> serial8250.0: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A >> 1ef600300.serial: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A >> 1ef600400.serial: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A >> 1ef600500.serial: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A >> 1ef600600.serial: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A >> brd: module loaded >> PPC 4xx OCP EMAC driver, version 3.54 >> MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels >> ZMII /plb/opb/emac-zmii@ef600d00 initialized >> RGMII /plb/opb/emac-rgmii@ef601000 initialized with MDIO support >> /plb/opb/emac-rgmii@ef601000: input 0 in RGMII mode >> eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:04:d0 >> eth0: found Marvell 88E1111 Ethernet PHY (0x00) >> /plb/opb/emac-rgmii@ef601000: input 1 in RGMII mode >> eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:01:04:d1 >> eth1: found Marvell 88E1111 Ethernet PHY (0x01) >> Uniform Multi-Platform E-IDE driver >> Driver 'sd' needs updating - please use bus_type methods >> scsi0 : pata_platform >> ata1: PATA max PIO6 mmio cmd 0x1c1000000 ctl 0x1c1000098 irq 32 >> ata1.00: ATA-0: SMC01GBFK6E, CF080204, max MWDMA2 >> ata1.00: 2001888 sectors, multi 0: LBA >> ata1.00: configured for PIO >> ata1.00: configured for PIO >> ata1: EH complete >> scsi 0:0:0:0: Direct-Access ATA SMC01GBFK6E CF08 PQ: 0 ANSI: 5 >> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA >> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA >> sda: sda1 sda2 sda3 sda4 >> sd 0:0:0:0: [sda] Attached SCSI disk >> sd 0:0:0:0: Attached scsi generic sg0 type 0 >> 1fc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank >> Amd/Fujitsu Extended Query Table at 0x0040 >> 1fc000000.nor_flash: CFI does not contain boot bank location. Assuming top. >> number of CFI chips: 1 >> cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. >> RedBoot partition parsing not available >> Creating 9 MTD partitions on "1fc000000.nor_flash": >> 0x00000000-0x00500000 : "kernel0" >> 0x00500000-0x00a00000 : "ramdisk0" >> 0x00a00000-0x00f00000 : "kernel1" >> 0x00f00000-0x01400000 : "ramdisk1" >> 0x01400000-0x01900000 : "kernel2" >> 0x01900000-0x01e00000 : "ramdisk2" >> 0x03f60000-0x03f80000 : "env0" >> 0x03f80000-0x03fa0000 : "env1" >> 0x03fa0000-0x04000000 : "u-boot" >> spi_ppc4xx_of 1ef600900.spi: driver initialized >> ppc-of-ehci e0000300.ehci: OF EHCI >> ppc-of-ehci e0000300.ehci: new USB bus registered, assigned bus number 1 >> ppc-of-ehci e0000300.ehci: irq 34, io mem 0xe0000300 >> ppc-of-ehci e0000300.ehci: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >> usb usb1: configuration #1 chosen from 1 choice >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 1 port detected >> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> usb usb1: Product: OF EHCI >> usb usb1: Manufacturer: Linux 2.6.27.9-00045-gcccf182-dirty ehci_hcd >> usb usb1: SerialNumber: PPC-OF USB >> ppc-of-ohci e0000400.usb: OF OHCI >> ppc-of-ohci e0000400.usb: new USB bus registered, assigned bus number 2 >> ppc-of-ohci e0000400.usb: irq 35, io mem 0xe0000400 >> usb usb2: configuration #1 chosen from 1 choice >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 1 port detected >> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 >> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> usb usb2: Product: OF OHCI >> usb usb2: Manufacturer: Linux 2.6.27.9-00045-gcccf182-dirty ohci_hcd >> usb usb2: SerialNumber: PPC-OF USB >> Initializing USB Mass Storage driver... >> usbcore: registered new interface driver usb-storage >> USB Mass Storage support registered. >> i2c /dev entries driver >> rtc-m41t80 0-0068: chip found, driver version 0.05 >> rtc-m41t80 0-0068: rtc core: registered m41t65 as rtc0 >> ibm-iic 1ef600700.i2c: using standard (100 kHz) mode >> ibm-iic 1ef600800.i2c: using standard (100 kHz) mode >> at24 0-0052: 512 byte 24c04 EEPROM (writable) >> ad7414 0-0048: chip found >> TCP cubic registered >> NET: Registered protocol family 17 >> RPC: Registered udp transport module. >> RPC: Registered tcp transport module. >> rtc-m41t80 0-0068: setting system clock to 2009-01-05 11:33:38 UTC (1231155218) >> eth0: link is down >> eth0: link is up, 100 FDX, pause enabled >> IP-Config: Complete: >> device=eth0, addr=137.237.178.105, mask=255.255.255.0, gw=137.237.178.1, >> host=hydra_temp, domain=, nis-domain=(none), >> bootserver=137.237.179.31, rootserver=137.237.179.31, rootpath= >> Freeing unused kernel memory: 156k init >> Checking /dev/sda1 >> Checking /dev/sda2 >> Checking /dev/sda3 >> Checking /dev/sda4 >> kjournald starting. Commit interval 5 seconds >> EXT3 FS on sda3, internal journal >> EXT3-fs: mounted filesystem with ordered data mode. >> kjournald starting. Commit interval 5 seconds >> EXT3 FS on sda1, internal journal >> EXT3-fs: mounted filesystem with ordered data mode. >> kjournald starting. Commit interval 5 seconds >> EXT3 FS on sda2, internal journal >> EXT3-fs: mounted filesystem with ordered data mode. >> kjournald starting. Commit interval 5 seconds >> EXT3 FS on sda4, internal journal >> EXT3-fs: mounted filesystem with ordered data mode. >> init started: BusyBox v1.10.4 (2008-10-27 12:52:02 EDT) >> starting pid 889, tty '/dev/ttyS0': '/etc/init.d/rcS' >> launcher[944]: launching /bin/craft on /dev/ttyS0 >> Hydra> > >