Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575

[Tejun Heo <tj@kernel.org>]

Timur Tabi wrote:
> Tejun Heo wrote:
> 
>> Running "lspci -nnvvvxxx" before loading the driver should be enough.
> 
> That might be difficult.  My root file system is on my SATA drive.
> It'll be a while before I can build an NFS rootfs.
> 

Yeah, right.  The following patch should do the trick then.

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 788bba2..b3f4df7 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2606,6 +2606,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	{
+		u16 cmd;
+		pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+		printk("XXX PCI_COMMAND=0x%x\n", cmd);
+	}
+
 	/* The AHCI driver can only drive the SATA ports, the PATA driver
 	   can drive them all so if both drivers are selected make sure
 	   AHCI stays out of the way */


-- 
tejun