From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from oz.embeddedARM.com (oz.embeddedarm.com [67.40.67.44]) by ozlabs.org (Postfix) with ESMTP id 5C0C3DDE28 for ; Sat, 18 Apr 2009 03:01:21 +1000 (EST) Message-ID: <49E8B69A.8010005@embeddedarm.com> Date: Fri, 17 Apr 2009 10:04:26 -0700 From: Eddie Dawydiuk MIME-Version: 1.0 To: linuxppc-dev@ozlabs.org, Grant Likely Subject: Example dts file Content-Type: text/plain; charset=ISO-8859-1; format=flowed List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, I'm working on creating a dts file for a custom board based on the Yosemite AMCC 440EP evaluation board. We have an FPGA connected to the PCI bus, and I'm a bit unsure how to describe this in the dts file. The FPGA implements an SD card core, RTC core, Nand core... Can anyone point me to an example dts file I can refer to? I've read that I'm not required to describe every PCI device in the system. Although I'd like to eventually submit our changes for upstream support, so as far as I know I do need to specify all of these devices in the dts file, so drivers can parse the dts file to know what devices are present. -- Best Regards, ________________________________________________________________ Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200 16525 East Laser Drive | fax: (480) 837-5300 Fountain Hills, AZ 85268 | web: www.embeddedARM.com