From: Scott Wood <scottwood@freescale.com>
To: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jrigby@gmail.com>,
linuxppc-dev@ozlabs.org, Piotr Ziecik <kosmo@semihalf.com>,
netdev@vger.kernel.org
Subject: Re: [PATCH 02/12] fs_enet: Add MPC5121 FEC support.
Date: Wed, 06 May 2009 15:41:38 -0500 [thread overview]
Message-ID: <4A01F602.2010601@freescale.com> (raw)
In-Reply-To: <1241640919-4650-3-git-send-email-wd@denx.de>
Wolfgang Denk wrote:
> +/*
> + * Define the buffer descriptor structure.
> + */
> +typedef struct bufdesc {
> + ushort cbd_sc; /* Control and status info */
> + ushort cbd_datlen; /* Data length */
> + uint cbd_bufaddr; /* Buffer address */
> +} cbd_t;
> +
> +/*
> + * The following definitions courtesy of commproc.h, which where
> + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
> + */
> +#define BD_SC_WRAP ((ushort)0x2000)
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet receive.
> + */
> +#define BD_ENET_RX_EMPTY ((ushort)0x8000)
> +#define BD_ENET_RX_WRAP ((ushort)0x2000)
> +#define BD_ENET_RX_INTR ((ushort)0x1000)
> +#define BD_ENET_RX_LAST ((ushort)0x0800)
> +#define BD_ENET_RX_FIRST ((ushort)0x0400)
> +#define BD_ENET_RX_MISS ((ushort)0x0100)
> +#define BD_ENET_RX_LG ((ushort)0x0020)
> +#define BD_ENET_RX_NO ((ushort)0x0010)
> +#define BD_ENET_RX_SH ((ushort)0x0008)
> +#define BD_ENET_RX_CR ((ushort)0x0004)
> +#define BD_ENET_RX_OV ((ushort)0x0002)
> +#define BD_ENET_RX_CL ((ushort)0x0001)
> +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet transmit.
> + */
> +#define BD_ENET_TX_READY ((ushort)0x8000)
> +#define BD_ENET_TX_PAD ((ushort)0x4000)
> +#define BD_ENET_TX_WRAP ((ushort)0x2000)
> +#define BD_ENET_TX_INTR ((ushort)0x1000)
> +#define BD_ENET_TX_LAST ((ushort)0x0800)
> +#define BD_ENET_TX_TC ((ushort)0x0400)
> +#define BD_ENET_TX_DEF ((ushort)0x0200)
> +#define BD_ENET_TX_HB ((ushort)0x0100)
> +#define BD_ENET_TX_LC ((ushort)0x0080)
> +#define BD_ENET_TX_RL ((ushort)0x0040)
> +#define BD_ENET_TX_UN ((ushort)0x0002)
> +#define BD_ENET_TX_CSL ((ushort)0x0001)
> +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
All of the above is duplicative (with even the same names) of stuff in
asm/cpm.h. Beyond just the duplication, what happens if both CPM2 and
512x are enabled in the same kernel?
-Scott
next prev parent reply other threads:[~2009-05-06 20:41 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-06 20:15 [PATCH 00/16] Add support for MPC512x Wolfgang Denk
2009-05-06 20:15 ` [PATCH 01/12] fs_enet: Use defines to set driver tunables Wolfgang Denk
2009-05-06 20:35 ` Grant Likely
2009-05-06 22:02 ` Wolfgang Denk
2009-05-06 22:41 ` Grant Likely
2009-05-06 20:15 ` [PATCH 02/12] fs_enet: Add MPC5121 FEC support Wolfgang Denk
2009-05-06 20:33 ` Grant Likely
2009-05-06 21:08 ` Scott Wood
2009-05-06 22:01 ` Wolfgang Denk
2009-05-06 22:29 ` Grant Likely
2009-05-06 22:41 ` Wolfgang Denk
2009-05-07 14:09 ` Grant Likely
2009-05-08 2:02 ` John Rigby
2009-05-08 7:52 ` David Miller
2009-05-11 6:56 ` David Jander
2009-05-07 8:14 ` David Jander
2009-05-07 13:05 ` Kumar Gala
2009-05-06 20:40 ` David Miller
2009-05-06 22:06 ` Wolfgang Denk
2009-05-06 20:41 ` Scott Wood [this message]
2009-05-06 22:09 ` Wolfgang Denk
2009-05-06 22:39 ` Grant Likely
2009-05-14 12:38 ` Piotr Zięcik
2009-05-14 14:00 ` Grant Likely
2009-05-18 22:17 ` Benjamin Herrenschmidt
2009-05-19 11:26 ` Piotr Zięcik
2009-05-19 21:56 ` Benjamin Herrenschmidt
2009-05-21 8:34 ` Piotr Zięcik
2009-05-21 15:36 ` Grant Likely
2009-05-06 20:15 ` [PATCH 03/12] fs_enet: Add FEC TX Alignment workaround for MPC5121 Wolfgang Denk
2009-05-06 20:37 ` Grant Likely
2009-05-06 22:12 ` Wolfgang Denk
2009-05-06 22:42 ` Grant Likely
2009-05-08 2:36 ` John Rigby
2009-05-06 20:15 ` [PATCH 04/12] mpc5121: Added reset module registers representation Wolfgang Denk
2009-05-06 20:29 ` Scott Wood
2009-05-06 21:57 ` Wolfgang Denk
2009-05-06 20:39 ` Grant Likely
2009-05-06 22:14 ` Wolfgang Denk
2009-05-06 20:15 ` [PATCH 05/12] mpc5121ads: Added Reset Module node to DTS Wolfgang Denk
2009-05-06 20:40 ` Grant Likely
2009-05-06 22:16 ` Wolfgang Denk
2009-05-06 22:46 ` Grant Likely
2009-05-06 20:15 ` [PATCH 06/12] mpc5121: Added NAND Flash Controller driver Wolfgang Denk
2009-05-06 20:59 ` Grant Likely
2009-05-08 2:22 ` John Rigby
2009-05-08 3:07 ` Grant Likely
2009-05-07 8:08 ` David Jander
2009-05-08 3:30 ` John Rigby
2009-05-13 8:41 ` Piotr Zięcik
2009-05-06 20:15 ` [PATCH 07/12] mpc5121ads: Clean up and fix NAND description in mpc5121ads DTS Wolfgang Denk
2009-05-06 21:00 ` Grant Likely
2009-05-06 20:15 ` [PATCH 08/12] mpc5121: Added I2C support Wolfgang Denk
2009-05-06 21:01 ` Grant Likely
2009-05-06 22:19 ` Wolfgang Denk
2009-05-06 22:51 ` Grant Likely
2009-05-07 2:41 ` Grant Likely
2009-05-07 6:36 ` Wolfgang Grandegger
2009-05-18 13:57 ` Piotr Zięcik
2009-05-18 14:11 ` Grant Likely
2009-05-18 14:29 ` Wolfgang Grandegger
2009-05-19 7:47 ` Piotr Zięcik
2009-05-19 8:10 ` Wolfgang Grandegger
2009-05-08 2:12 ` John Rigby
2009-05-08 3:01 ` Grant Likely
2009-05-06 20:15 ` [PATCH 09/12] mpc5121ads: Added I2C RTC node to mpc5121ads DTS Wolfgang Denk
2009-05-06 21:02 ` Grant Likely
2009-05-07 6:45 ` Wolfgang Grandegger
2009-05-06 20:15 ` [PATCH 10/12] mpc5121: Add MPC5121 Real time clock driver Wolfgang Denk
2009-05-06 21:03 ` Grant Likely
2009-05-06 21:06 ` Wolfram Sang
2009-05-06 22:40 ` Grant Likely
2009-05-08 2:41 ` [rtc-linux] " John Rigby
2009-05-08 15:53 ` Grant Likely
2009-05-08 16:09 ` Alessandro Zummo
2009-05-08 19:18 ` Wolfgang Denk
2009-05-08 16:10 ` Alessandro Zummo
2009-05-06 20:15 ` [PATCH 11/12] mpc5121: Added MPC512x DMA driver Wolfgang Denk
2009-05-06 21:07 ` Grant Likely
2009-05-08 2:49 ` John Rigby
2009-05-19 1:37 ` Hongjun Chen
2009-05-19 8:03 ` Piotr Zięcik
2009-05-20 0:39 ` Hongjun Chen
2009-05-06 20:15 ` [PATCH 12/12] mpc5121: Added default config for MPC5121 Wolfgang Denk
2009-05-06 21:08 ` Grant Likely
2009-05-06 22:23 ` Wolfgang Denk
2009-05-06 22:48 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A01F602.2010601@freescale.com \
--to=scottwood@freescale.com \
--cc=jrigby@gmail.com \
--cc=kosmo@semihalf.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).