Phyp-dump disabled at boot time Using pSeries machine description Page orders: linear mapping = 24, virtual = 16, io = 12, vmemmap = 24 Using 1TB segments Found initrd at 0xc000000003700000:0xc000000003eca37e bootconsole [udbg0] enabled Partition configured for 8 cpus. CPU maps initialized for 2 threads per core (thread shift is 1) Starting Linux PPC64 #3 SMP Fri Sep 25 13:19:46 IST 2009 ----------------------------------------------------- ppc64_pft_size = 0x19 physicalMemorySize = 0x80000000 htab_hash_mask = 0x3ffff ----------------------------------------------------- Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-git15 (root@mjs22lp5) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #3 SMP Fri Sep 25 13:19:46 IST 2009 [boot]0012 Setup Arch Node 0 Memory: 0x0-0x42000000 Node 1 Memory: 0x42000000-0x80000000 EEH: No capable adapters found PPC64 nvram contains 15360 bytes Using shared processor idle loop Zone PFN ranges: DMA 0x00000000 -> 0x00008000 Normal 0x00008000 -> 0x00008000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x00004200 1: 0x00004200 -> 0x00008000 On node 0 totalpages: 16896 DMA zone: 15 pages used for memmap DMA zone: 0 pages reserved DMA zone: 16881 pages, LIFO batch:1 On node 1 totalpages: 15872 DMA zone: 14 pages used for memmap DMA zone: 0 pages reserved DMA zone: 15858 pages, LIFO batch:1 [boot]0015 Setup Done PERCPU: Embedded 2 pages/cpu @c000000001400000 s96744 r0 d34328 u131072 pcpu-alloc: s96744 r0 d34328 u131072 alloc=1*1048576 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 PERCPU: initialized 17 slots [c000000001500200,c000000001500310) PERCPU: chunk 0 relocating -1 -> 13 c000000001500380 PERCPU: relocated Built 2 zonelists in Node order, mobility grouping on. Total pages: 32739 Policy zone: DMA Kernel command line: root=/dev/sda3 sysrq=8 xmon=on PID hash table entries: 4096 (order: -1, 32768 bytes) freeing bootmem node 0 freeing bootmem node 1 Memory: 2040320k/2097152k available (12800k kernel code, 56832k reserved, 2880k data, 4268k bss, 4800k init) Hierarchical RCU implementation. NR_IRQS:512 [boot]0020 XICS Init [boot]0021 XICS Done pic: no ISA interrupt controller time_init: decrementer frequency = 512.000000 MHz time_init: processor frequency = 4005.000000 MHz clocksource: timebase mult[7d0000] shift[22] registered clockevent: decrementer mult[83126e97] shift[32] cpu[0] Console: colour dummy device 80x25 console [hvc0] enabled, bootconsole disabled allocated 1310720 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 5, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 4, 1048576 bytes) Mount-cache hash table entries: 4096 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer irq: irq 2 on host null mapped to virtual irq 16 clockevent: decrementer mult[83126e97] shift[32] cpu[1] Processor 1 found. clockevent: decrementer mult[83126e97] shift[32] cpu[2] Processor 2 found. clockevent: decrementer mult[83126e97] shift[32] cpu[3] Processor 3 found. Brought up 4 CPUs Node 0 CPUs: 0-3 Node 1 CPUs: CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 (cpu_power = 589) 1 (cpu_power = 589) domain 1: span 0-3 level CPU groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 (cpu_power = 589) 0 (cpu_power = 589) domain 1: span 0-3 level CPU groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU2 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 2 (cpu_power = 589) 3 (cpu_power = 589) domain 1: span 0-3 level CPU groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) CPU3 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 3 (cpu_power = 589) 2 (cpu_power = 589) domain 1: span 0-3 level CPU groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) NET: Registered protocol family 16 IBM eBus Device Driver POWER6 performance monitor hardware support registered PCI: Probing PCI hardware PCI: Probing PCI hardware done bio: create slab at 0 vgaarb: loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timebase Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 NET: Registered protocol family 2 PERCPU: chunk 0 relocating 13 -> 12 c000000001500380 PERCPU: relocated IP route cache hash table entries: 16384 (order: 1, 131072 bytes) TCP established hash table entries: 65536 (order: 4, 1048576 bytes) TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Switched to high resolution mode on CPU 0 Freeing initrd memory: 7976k freed irq: irq 655360 on host null mapped to virtual irq 17 irq: irq 655362 on host null mapped to virtual irq 18 IOMMU table initialized, virtual merging enabled irq: irq 655364 on host null mapped to virtual irq 19 irq: irq 655365 on host null mapped to virtual irq 20 irq: irq 589825 on host null mapped to virtual irq 21 RTAS daemon started audit: initializing netlink socket (disabled) type=2000 audit(1253865170.250:1): initialized HugeTLB registered 16 MB page size, pre-allocated 0 pages HugeTLB registered 16 GB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) msgmni has been set to 4000 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 vio_register_driver: driver hvc_console registering HVSI: registered 0 devices Generic RTC Driver v1.07 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled pmac_zilog: 0.6 (Benjamin Herrenschmidt ) input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver mice: PS/2 mouse device common for all mice EDAC MC: Ver: 2.1.0 Sep 25 2009 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 15 registered taskstats version 1 Freeing unused kernel memory: 4800k freed PERCPU: chunk 0 relocating 12 -> 11 c000000001500380 PERCPU: relocated SysRq : Changing Loglevel Loglevel set to 8 SCSI subsystem initialized vio_register_driver: driver ibmvscsi registering ibmvscsi 30000002: SRP_VERSION: 16.a scsi0 : IBM POWER Virtual SCSI Adapter 1.5.8 ibmvscsi 30000002: partner initialization complete ibmvscsi 30000002: host srp version: 16.a, host partition 06-1C12A (1), OS 3, max io 262144 ibmvscsi 30000002: Client reserve enabled ibmvscsi 30000002: sent SRP login ibmvscsi 30000002: SRP_LOGIN succeeded scsi 0:0:1:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3 scsi 0:0:2:0: CD-ROM AIX VOPTA PQ: 0 ANSI: 4 udevd version 128 started sd 0:0:1:0: [sda] 33554432 512-byte logical blocks: (17.1 GB/16.0 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 17 00 00 08 sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sda3 sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sd 0:0:1:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. udevd version 128 started sd 0:0:1:0: Attached scsi generic sg0 type 0 scsi 0:0:2:0: Attached scsi generic sg1 type 5 drivers/net/ibmveth.c: ibmveth: IBM i/pSeries Virtual Ethernet Driver 1.03 vio_register_driver: driver ibmveth registering IBM eHEA ethernet device driver (Release EHEA_0102) irq: irq 590080 on host null mapped to virtual irq 256 ehea: eth2: Jumbo frames are enabled ehea: eth2 -> logical port id #9 ehea: eth3: Jumbo frames are enabled ehea: eth3 -> logical port id #10 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:2:0: Attached scsi CD-ROM sr0 Adding 1044096k swap on /dev/sda2. Priority:-1 extents:1 across:1044096k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com loop: module loaded fuse init (API version 7.13) irq: irq 777 on host null mapped to virtual irq 265 ehea: eth2: Physical port up ehea: External switch port is backup port irq: irq 778 on host null mapped to virtual irq 266 NET: Registered protocol family 10 PERCPU: chunk 0 relocating 11 -> 10 c000000001500380 PERCPU: relocated PERCPU: chunk 0 relocating 10 -> 9 c000000001500380 PERCPU: relocated PERCPU: chunk 1 relocating -1 -> 16 c00000003e6d7500 PERCPU: relocated PERCPU: chunk 1 relocating 16 -> 14 c00000003e6d7500 PERCPU: relocated PERCPU: chunk 1, alloc pages [0,1) PERCPU: chunk 1, map pages [0,1) PERCPU: map 0xd00000001ff00000, 1 pages 14136 PERCPU: map 0xd00000001ff20000, 1 pages 14137 PERCPU: map 0xd00000001ff40000, 1 pages 14159 PERCPU: map 0xd00000001ff60000, 1 pages 14166 PERCPU: map 0xd00000001ff80000, 1 pages 14161 PERCPU: map 0xd00000001ffa0000, 1 pages 14165 PERCPU: map 0xd00000001ffc0000, 1 pages 15732 PERCPU: map 0xd00000001ffe0000, 1 pages 16049 PERCPU: chunk 1, will clear 4096b/unit d00000001ff00000 d00000001ff20000 d00000001ff40000 d00000001ff60000 d00000001ff80000 d00000001ffa0000 d00000001ffc0000 d00000001ffe0000 PERCPU: chunk 0 relocating 9 -> 8 c000000001500380 PERCPU: relocated PERCPU: chunk 0 relocating 8 -> 7 c000000001500380 PERCPU: relocated eth2: no IPv6 routers present