Linux for MPC5554 or MPC5534 (core e200z6)?

Linux for MPC5554 or MPC5534 (core e200z6)?

[Németh Márton]

Hi Grant,
Hello List,

is there anybody who was successfully run Linux kernel on Freescale MPC5554
[1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC
controllers have the e200z6 core.

Is there anybody who is working with these controllers or with the e200z6 core?

References:
[1] Freescale MPC5554
    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5554

[2] MPC5553/MPC5554 Microcontroller Reference Manual
    http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf

[3] Freescale MPC5534
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5534

[4] MPC5534 Microcontroller Reference Manual
    http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf

Regards,

	Márton Németh

Re: Linux for MPC5554 or MPC5534 (core e200z6)?

[Kumar Gala]

On Oct 20, 2009, at 5:21 PM, N=E9meth M=E1rton wrote:

> Hi Grant,
> Hello List,
>
> is there anybody who was successfully run Linux kernel on Freescale =20=

> MPC5554
> [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded =20
> PowerPC
> controllers have the e200z6 core.
>
> Is there anybody who is working with these controllers or with the =20
> e200z6 core?
>
> References:
> [1] Freescale MPC5554
>    =
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5554
>
> [2] MPC5553/MPC5554 Microcontroller Reference Manual
>    =
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf=

>
> [3] Freescale MPC5534
> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5534=

>
> [4] MPC5534 Microcontroller Reference Manual
>    http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf

I'm not aware of anyone working on Linux for these chips based on the =20=

e200z6.  What application do you have that you want to run Linux on =20
them?

- k=

Re: Linux for MPC5554 or MPC5534 (core e200z6)?

[Grant Likely]

2009/10/21 N=E9meth M=E1rton <nm127@freemail.hu>:
> Hi Grant,
> Hello List,
>
> is there anybody who was successfully run Linux kernel on Freescale MPC55=
54
> [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC
> controllers have the e200z6 core.
>
> Is there anybody who is working with these controllers or with the e200z6=
 core?

I'm pretty sure nobody has done a Linux port to any of these chips.
Nor do I know of any work having been done in the past.

g.

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: Linux for MPC5554 or MPC5534 (core e200z6)?

[Németh Márton]

Kumar Gala wrote:
> On Oct 20, 2009, at 5:21 PM, Németh Márton wrote:
> 
>> Hi Grant,
>> Hello List,
>>
>> is there anybody who was successfully run Linux kernel on Freescale  
>> MPC5554
>> [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded  
>> PowerPC
>> controllers have the e200z6 core.
>>
>> Is there anybody who is working with these controllers or with the  
>> e200z6 core?
>>
>> References:
>> [1] Freescale MPC5554
>>    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5554
>>
>> [2] MPC5553/MPC5554 Microcontroller Reference Manual
>>    http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf
>>
>> [3] Freescale MPC5534
>> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5534
>>
>> [4] MPC5534 Microcontroller Reference Manual
>>    http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf
> 
> I'm not aware of anyone working on Linux for these chips based on the  
> e200z6.  What application do you have that you want to run Linux on  
> them?

At this time I am just looking to see what kind of operating systems these
chips can run. I think the first step to run Linux would be that the MMU
and serial console starts to work then maybe I would check how the PF_CAN
interface ( http://lwn.net/Articles/253425/ ) would work on this device
if a FlexCAN2 driver is available.

Is there any other powerpc port with e200z6 core?

Regards,

	Márton Németh

Re: Linux for MPC5554 or MPC5534 (core e200z6)?

[Kumar Gala]

On Oct 21, 2009, at 10:19 AM, N=E9meth M=E1rton wrote:

> Kumar Gala wrote:
>> On Oct 20, 2009, at 5:21 PM, N=E9meth M=E1rton wrote:
>>
>>> Hi Grant,
>>> Hello List,
>>>
>>> is there anybody who was successfully run Linux kernel on Freescale
>>> MPC5554
>>> [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded
>>> PowerPC
>>> controllers have the e200z6 core.
>>>
>>> Is there anybody who is working with these controllers or with the
>>> e200z6 core?
>>>
>>> References:
>>> [1] Freescale MPC5554
>>>   =
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5554
>>>
>>> [2] MPC5553/MPC5554 Microcontroller Reference Manual
>>>   =
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf=

>>>
>>> [3] Freescale MPC5534
>>> =
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5534
>>>
>>> [4] MPC5534 Microcontroller Reference Manual
>>>   http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf
>>
>> I'm not aware of anyone working on Linux for these chips based on the
>> e200z6.  What application do you have that you want to run Linux on
>> them?
>
> At this time I am just looking to see what kind of operating systems =20=

> these
> chips can run. I think the first step to run Linux would be that the =20=

> MMU
> and serial console starts to work then maybe I would check how the =20
> PF_CAN
> interface ( http://lwn.net/Articles/253425/ ) would work on this =20
> device
> if a FlexCAN2 driver is available.
>
> Is there any other powerpc port with e200z6 core?

I'm not aware of any other parts w/the e2002z6 core.  The MMU code =20
exists in the kernel for e200, but probably needs some updating/=20
rehashing.

- k=