linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nathan Fontenot <nfont@austin.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] sysfs cpu probe/release files
Date: Tue, 24 Nov 2009 19:49:58 -0600	[thread overview]
Message-ID: <4B0C8D46.1030206@austin.ibm.com> (raw)
In-Reply-To: <4B0C8B45.6080804@austin.ibm.com>

Create new probe and release sysfs files to facilitate adding and removing
cpus from the system.  This also creates the powerpc specific stubs to handle
the arch callouts from writes to the sysfs files.

The creation and use of these files is regulated by the 
CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the
capability will have the files created.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
---
 arch/powerpc/Kconfig               |    4 ++++
 arch/powerpc/include/asm/machdep.h |    5 +++++
 arch/powerpc/kernel/sysfs.c        |   19 +++++++++++++++++++
 drivers/base/cpu.c                 |   32 ++++++++++++++++++++++++++++++++
 include/linux/cpu.h                |    4 ++++
 5 files changed, 64 insertions(+)

Index: powerpc/drivers/base/cpu.c
===================================================================
--- powerpc.orig/drivers/base/cpu.c	2009-11-23 18:19:23.000000000 -0600
+++ powerpc/drivers/base/cpu.c	2009-11-24 14:30:07.000000000 -0600
@@ -72,6 +72,38 @@
 	per_cpu(cpu_sys_devices, logical_cpu) = NULL;
 	return;
 }
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+static ssize_t cpu_probe_store(struct class *class, const char *buf,
+			       size_t count)
+{
+	return arch_cpu_probe(buf, count);
+}
+
+static ssize_t cpu_release_store(struct class *class, const char *buf,
+				 size_t count)
+{
+	return arch_cpu_release(buf, count);
+}
+
+static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
+
+int __init cpu_probe_release_init(void)
+{
+	int rc;
+
+	rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+			       &class_attr_probe.attr);
+	if (!rc)
+		rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+				       &class_attr_release.attr);
+
+	return rc;
+}
+device_initcall(cpu_probe_release_init);
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
 #else /* ... !CONFIG_HOTPLUG_CPU */
 static inline void register_cpu_control(struct cpu *cpu)
 {
Index: powerpc/arch/powerpc/include/asm/machdep.h
===================================================================
--- powerpc.orig/arch/powerpc/include/asm/machdep.h	2009-11-23 18:19:23.000000000 -0600
+++ powerpc/arch/powerpc/include/asm/machdep.h	2009-11-24 14:30:07.000000000 -0600
@@ -266,6 +266,11 @@
 	void (*suspend_disable_irqs)(void);
 	void (*suspend_enable_irqs)(void);
 #endif
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	ssize_t (*cpu_probe)(const char *, size_t);
+	ssize_t (*cpu_release)(const char *, size_t);
+#endif
 };
 
 extern void e500_idle(void);
Index: powerpc/arch/powerpc/kernel/sysfs.c
===================================================================
--- powerpc.orig/arch/powerpc/kernel/sysfs.c	2009-11-23 18:19:23.000000000 -0600
+++ powerpc/arch/powerpc/kernel/sysfs.c	2009-11-24 14:43:40.000000000 -0600
@@ -461,6 +461,25 @@
 
 	cacheinfo_cpu_offline(cpu);
 }
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ssize_t arch_cpu_probe(const char *buf, size_t count)
+{
+	if (ppc_md.cpu_probe)
+		return ppc_md.cpu_probe(buf, count);
+
+	return -EINVAL;
+}
+
+ssize_t arch_cpu_release(const char *buf, size_t count)
+{
+	if (ppc_md.cpu_release)
+		return ppc_md.cpu_release(buf, count);
+
+	return -EINVAL;
+}
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
 #endif /* CONFIG_HOTPLUG_CPU */
 
 static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
Index: powerpc/arch/powerpc/Kconfig
===================================================================
--- powerpc.orig/arch/powerpc/Kconfig	2009-11-23 18:19:23.000000000 -0600
+++ powerpc/arch/powerpc/Kconfig	2009-11-24 14:30:07.000000000 -0600
@@ -320,6 +320,10 @@
 
 	  Say N if you are unsure.
 
+config ARCH_CPU_PROBE_RELEASE
+	def_bool y
+	depends on HOTPLUG_CPU
+
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 
Index: powerpc/include/linux/cpu.h
===================================================================
--- powerpc.orig/include/linux/cpu.h	2009-11-23 18:19:23.000000000 -0600
+++ powerpc/include/linux/cpu.h	2009-11-24 14:30:07.000000000 -0600
@@ -43,6 +43,10 @@
 
 #ifdef CONFIG_HOTPLUG_CPU
 extern void unregister_cpu(struct cpu *cpu);
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+extern ssize_t arch_cpu_probe(const char *, size_t);
+extern ssize_t arch_cpu_release(const char *, size_t);
+#endif
 #endif
 struct notifier_block;
 

  parent reply	other threads:[~2009-11-25  1:50 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-25  1:41 [PATCH 0/3] Kernel handling of Dynamic Logical Partitioning Nathan Fontenot
2009-11-25  1:48 ` [PATCH 1/3] Kernel DLPAR infrastructure Nathan Fontenot
2009-11-25  2:15   ` Michael Neuling
2009-11-25  3:03     ` Michael Neuling
2009-11-25  3:16   ` Paul Mackerras
2009-11-25  1:49 ` Nathan Fontenot [this message]
2009-11-25  3:20   ` [PATCH 2/3] sysfs cpu probe/release files Paul Mackerras
2009-11-25  1:53 ` [PATCH 3/3] CPU DLPAR handling Nathan Fontenot
2009-11-25  3:22   ` Paul Mackerras
2009-11-25  3:12 ` [PATCH 0/3] Kernel handling of Dynamic Logical Partitioning Paul Mackerras
2009-11-25  7:07   ` Nathan Fontenot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B0C8D46.1030206@austin.ibm.com \
    --to=nfont@austin.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).