Using 0081e5dd bytes for initrd buffer Please wait, loading kernel... Allocated 00f00000 bytes for kernel @ 00d00000 Elf64 kernel loaded... Loading ramdisk... ramdisk loaded 0081e5dd @ 034d0000 OF stdout device is: /vdevice/vty@30000000 Preparing to boot Linux version 2.6.34-rc1-git9-autotest (root@llm62) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP Sat Mar 20 07:30:22 IST 2010 Max number of cores passed to firmware: 0x0000000000000200 Calling ibm,client-architecture-support... done command line: root=/dev/sda5 IDENT=1269051459 memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 0000000003cf0000 alloc_top : 0000000008000000 alloc_top_hi : 0000000008000000 rmo_top : 0000000008000000 ram_top : 0000000008000000 instantiating rtas at 0x00000000074e0000... done boot cpu hw idx 0000000000000000 starting cpu hw idx 0000000000000002... done copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0000000003d00000 -> 0x0000000003d015fa Device tree struct 0x0000000003d10000 -> 0x0000000003d30000 Calling quiesce... returning from prom_init Phyp-dump disabled at boot time Using pSeries machine description Using 1TB segments Found initrd at 0xc0000000034d0000:0xc000000003cee5dd bootconsole [udbg0] enabled Partition configured for 4 cpus. CPU maps initialized for 2 threads per core Starting Linux PPC64 #1 SMP Sat Mar 20 07:30:22 IST 2010 ----------------------------------------------------- ppc64_pft_size = 0x1a physicalMemorySize = 0x100000000 htab_hash_mask = 0x7ffff ----------------------------------------------------- Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34-rc1-git9-autotest (root@llm62) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP Sat Mar 20 07:30:22 IST 2010 [boot]0012 Setup Arch EEH: No capable adapters found PPC64 nvram contains 15360 bytes Zone PFN ranges: DMA 0x00000000 -> 0x00010000 Normal empty Movable zone start PFN for each node early_node_map[1] active PFN ranges 1: 0x00000000 -> 0x00010000 Could not find start_pfn for node 0 [boot]0015 Setup Done PERCPU: Embedded 1 pages/cpu @c000000000e00000 s24744 r0 d40792 u262144 pcpu-alloc: s24744 r0 d40792 u262144 alloc=1*1048576 pcpu-alloc: [0] 0 1 2 3 Built 2 zonelists in Node order, mobility grouping on. Total pages: 65480 Policy zone: DMA Kernel command line: root=/dev/sda5 IDENT=1269051459 PID hash table entries: 4096 (order: -1, 32768 bytes) freeing bootmem node 1 Memory: 4143168k/4194304k available (9408k kernel code, 51136k reserved, 2624k data, 1430k bss, 512k init) SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=256 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:512 nr_irqs:512 [boot]0020 XICS Init [boot]0021 XICS Done clocksource: timebase mult[7d0000] shift[22] registered Console: colour dummy device 80x25 console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled allocated 2621440 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) Mount-cache hash table entries: 4096 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio Processor 1 found. Processor 2 found. Processor 3 found. Brought up 4 CPUs NET: Registered protocol family 16 IBM eBus Device Driver POWER6 performance monitor hardware support registered PCI: Probing PCI hardware bio: create slab at 0 vgaarb: loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timebase NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 2, 262144 bytes) TCP established hash table entries: 131072 (order: 5, 2097152 bytes) TCP bind hash table entries: 65536 (order: 5, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 1, 196608 bytes) UDP-Lite hash table entries: 2048 (order: 1, 196608 bytes) NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 8313k freed IOMMU table initialized, virtual merging enabled audit: initializing netlink socket (disabled) type=2000 audit(1269051512.190:1): initialized Kprobe smoke test started Kprobe smoke test passed successfully rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 HugeTLB registered 16 MB page size, pre-allocated 0 pages HugeTLB registered 16 GB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) Btrfs loaded msgmni has been set to 8108 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 Generic RTC Driver v1.07 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled pmac_zilog: 0.6 (Benjamin Herrenschmidt ) Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 IBM eHEA ethernet device driver (Release EHEA_0102) ehea: eth0: Jumbo frames are disabled ehea: eth0 -> logical port id #2 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver mice: PS/2 mouse device common for all mice EDAC MC: Ver: 2.1.0 Mar 20 2010 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 15 registered taskstats version 1 Freeing unused kernel memory: 512k freed doing fast boot SCSI subsystem initialized ibmvscsi 30000002: SRP_VERSION: 16.a scsi0 : IBM POWER Virtual SCSI Adapter 1.5.8 ibmvscsi 30000002: partner initialization complete ibmvscsi 30000002: host srp version: 16.a, host partition VIO (1), OS 3, max io 1048576 ibmvscsi 30000002: fast_fail not supported in server ibmvscsi 30000002: Client reserve enabled ibmvscsi 30000002: sent SRP login ibmvscsi 30000002: SRP_LOGIN succeeded scsi 0:0:1:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3 Creating device nodes with udev udevd version 128 started sd 0:0:1:0: [sda] 167772160 512-byte logical blocks: (85.8 GB/80.0 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sda: sda1 sda2 < sda5 > sda3 sda4 sd 0:0:1:0: [sda] Cache data unavailable sd 0:0:1:0: [sda] Assuming drive cache: write through sd 0:0:1:0: [sda] Attached SCSI disk Boot logging started on /dev/hvc0(/dev/console) at Sat Mar 20 02:18:33 2010 resume device not found (ignoring) Waiting for device /dev/sda5 to appear: ok showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel fsck 1.41.9 (22-Aug-2009) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda5 /dev/sda5: clean, 726435/3948544 files, 9655477/15773808 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/sda5 mount -o rw,acl,user_xattr -t ext3 /dev/sda5 /root kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with writeback data mode mount: can't find /root/proc in /etc/fstab or /etc/mtab /sbin/smart_agetty: can not determine 'console' speed