From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.chez-thomas.org (hermes.mlbassoc.com [76.76.67.137]) by ozlabs.org (Postfix) with ESMTP id CE2E6B7D27 for ; Sun, 25 Apr 2010 00:26:23 +1000 (EST) Message-ID: <4BD2FF8A.9080608@mlbassoc.com> Date: Sat, 24 Apr 2010 08:26:18 -0600 From: Gary Thomas MIME-Version: 1.0 To: Wolfram Sang Subject: Re: Initcall ordering References: <4BD1C317.5000909@mlbassoc.com> <20100424012427.GA21255@pengutronix.de> In-Reply-To: <20100424012427.GA21255@pengutronix.de> Content-Type: multipart/mixed; boundary="------------060708010905050305060201" Cc: "linuxppc-dev@lists.ozlabs.org" , linux-i2c@vger.kernel.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is a multi-part message in MIME format. --------------060708010905050305060201 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 04/23/2010 07:24 PM, Wolfram Sang wrote: > Hi Gary, > > (adding linux-i2c) > > On Fri, Apr 23, 2010 at 09:56:07AM -0600, Gary Thomas wrote: >> I'm having trouble with the I2C devices on my 8347 platform. >> The problem is that I2C device probe() functions are only called >> once, as the I2C bus is being initialized (in this case fsl_i2c_init()) >> I have 2 devices on this bus, one device gets it's initcall >> before fsl_i2c_init, the second one does not :-( This means >> that the second device is never probed. > > Can you try this patch? No improvement, I'm afraid. Boot log with initcall_debug=1 attached. I have 2 devices on I2C-1 0x48 == tsc2007 touch screen controller 0x60 == pca9551 LED controller You can see that the tsc2007 driver gets initialized before the bus starts, but the pca9551 driver comes too late and never gets probed :-( Here's the snippet of my device tree: i2c@3100 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <15 0x8>; interrupt-parent = <&ipic>; dfsrr; ts@01 { compatible = "ti,tsc2007"; reg = <0x48>; }; leds@01 { compatible = "philips,leds-pca955x"; reg = <0x60>; }; }; -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ --------------060708010905050305060201 Content-Type: text/plain; name="boot.log" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="boot.log" RedBoot> e Memory <- <0x0 0x8000000> (128MB) ENET0: local-mac-address <- 00:07:d2:01:00:2e ENET1: local-mac-address <- 00:07:d2:01:00:2f CPU clock-frequency <- 0x27c19cc0 (667MHz) CPU timebase-frequency <- 0x4f64b50 (83MHz) CPU bus-frequency <- 0x13d92d40 (333MHz) zImage starting: loaded at 0x00400000 (sp: 0x005d0034) Allocating 0x3cedb8 bytes for kernel ... gunzipping (0x00000000 <- 0x0040d000:0x005ce961)...done 0x3b3c14 bytes Linux/PowerPC load: console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw initcall_debug=1 Finalizing device tree... flat tree at 0x5dc300 Using ASP8347E machine description Linux version 2.6.28-svn5105 (gthomas@titan) (gcc version 4.3.2 (crosstool-NG-svn_unknown@20090118.021742) ) #19 Sat Apr 24 08:12:18 MDT 2010 console [udbg0] enabled setup_arch: bootmem asp834x_setup_arch() DB FPGA at fdfee000 Found FSL PCI host bridge at 0x00000000ff008500. Firmware bus number: 0->0 PCI host bridge /pci@ff008500 (primary) ranges: MEM 0x00000000c0000000..0x00000000cfffffff -> 0x00000000c0000000 IO 0x00000000b8000000..0x00000000b80fffff -> 0x0000000000000000 arch: exit Zone PFN ranges: DMA 0x00000000 -> 0x00008000 Normal 0x00008000 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw initcall_debug=1 IPIC (128 IRQ sources) at fdeeb700 PID hash table entries: 512 (order: 9, 2048 bytes) clocksource: timebase mult[300c4ce] shift[22] registered Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 125864k/131072k available (3608k kernel code, 5052k reserved, 160k data, 107k bss, 176k init) Calibrating delay loop... 166.40 BogoMIPS (lpj=332800) Mount-cache hash table entries: 512 calling spawn_ksoftirqd+0x0/0x58 @ 1 initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 usecs calling net_ns_init+0x0/0x1a0 @ 1 net_namespace: 288 bytes initcall net_ns_init+0x0/0x1a0 returned 0 after 3906 usecs calling sysctl_init+0x0/0x4c @ 1 initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs calling ksysfs_init+0x0/0xd8 @ 1 initcall ksysfs_init+0x0/0xd8 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x28 @ 1 initcall init_jiffies_clocksource+0x0/0x28 returned 0 after 0 usecs calling filelock_init+0x0/0x48 @ 1 initcall filelock_init+0x0/0x48 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x5c @ 1 initcall init_misc_binfmt+0x0/0x5c returned 0 after 0 usecs calling init_script_binfmt+0x0/0x28 @ 1 initcall init_script_binfmt+0x0/0x28 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x28 @ 1 initcall init_elf_binfmt+0x0/0x28 returned 0 after 0 usecs calling random32_init+0x0/0xcc @ 1 initcall random32_init+0x0/0xcc returned 0 after 0 usecs calling sock_init+0x0/0x84 @ 1 initcall sock_init+0x0/0x84 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x170 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x170 returned 0 after 3906 usecs calling of_bus_driver_init+0x0/0x30 @ 1 initcall of_bus_driver_init+0x0/0x30 returned 0 after 0 usecs calling bdi_class_init+0x0/0x50 @ 1 initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x64 @ 1 initcall kobject_uevent_init+0x0/0x64 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x30 @ 1 initcall pcibus_class_init+0x0/0x30 returned 0 after 0 usecs calling pci_driver_init+0x0/0x2c @ 1 initcall pci_driver_init+0x0/0x2c returned 0 after 0 usecs calling tty_class_init+0x0/0x58 @ 1 initcall tty_class_init+0x0/0x58 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xfc @ 1 initcall vtconsole_class_init+0x0/0xfc returned 0 after 0 usecs calling i2c_init+0x0/0x84 @ 1 ************** i2c_register_driver.711 ************** i2c_register_driver.716 ************** i2c_register_driver.735 ************** i2c_register_driver.742 ************** i2c_register_driver.747 initcall i2c_init+0x0/0x84 returned 0 after 19531 usecs calling irq_late_init+0x0/0x10c @ 1 initcall irq_late_init+0x0/0x10c returned 0 after 0 usecs calling vdso_init+0x0/0x4a4 @ 1 initcall vdso_init+0x0/0x4a4 returned 0 after 0 usecs calling ppc_init+0x0/0x68 @ 1 initcall ppc_init+0x0/0x68 returned 0 after 0 usecs calling fsl_usb_of_init+0x0/0x454 @ 1 initcall fsl_usb_of_init+0x0/0x454 returned 0 after 0 usecs calling gfar_of_init+0x0/0x3f4 @ 1 initcall gfar_of_init+0x0/0x3f4 returned 0 after 0 usecs calling gfar_mdio_of_init+0x0/0x90 @ 1 initcall gfar_mdio_of_init+0x0/0x90 returned 0 after 0 usecs calling mpc83xx_restart_init+0x0/0x38 @ 1 initcall mpc83xx_restart_init+0x0/0x38 returned 0 after 0 usecs calling topology_init+0x0/0x7c @ 1 initcall topology_init+0x0/0x7c returned 0 after 0 usecs calling pcibios_init+0x0/0x154 @ 1 PCI: Probing PCI hardware PCI: Cannot allocate resource region 5 of device 0000:00:0b.0, will remap PCI: Cannot allocate resource region 0 of device 0000:00:0c.0, will remap bus: 00 index 0 io port: [0x00-0xfffff] bus: 00 index 1 mmio: [0xc0000000-0xcfffffff] initcall pcibios_init+0x0/0x154 returned 0 after 19531 usecs calling init_ipic_sysfs+0x0/0xa4 @ 1 initcall init_ipic_sysfs+0x0/0xa4 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x218 @ 1 initcall param_sysfs_init+0x0/0x218 returned 0 after 7812 usecs calling readahead_init+0x0/0x54 @ 1 initcall readahead_init+0x0/0x54 returned 0 after 0 usecs calling init_bio+0x0/0xf4 @ 1 initcall init_bio+0x0/0xf4 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x50 @ 1 initcall cryptomgr_init+0x0/0x50 returned 0 after 0 usecs calling blk_settings_init+0x0/0x30 @ 1 initcall blk_settings_init+0x0/0x30 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x44 @ 1 initcall blk_ioc_init+0x0/0x44 returned 0 after 0 usecs calling blk_softirq_init+0x0/0x40 @ 1 initcall blk_softirq_init+0x0/0x40 returned 0 after 0 usecs calling genhd_device_init+0x0/0x98 @ 1 initcall genhd_device_init+0x0/0x98 returned 0 after 0 usecs calling pci_slot_init+0x0/0x64 @ 1 initcall pci_slot_init+0x0/0x64 returned 0 after 0 usecs calling fbmem_init+0x0/0xc4 @ 1 initcall fbmem_init+0x0/0xc4 returned 0 after 0 usecs calling misc_init+0x0/0xc0 @ 1 initcall misc_init+0x0/0xc0 returned 0 after 0 usecs calling phy_init+0x0/0x50 @ 1 initcall phy_init+0x0/0x50 returned 0 after 0 usecs calling init_scsi+0x0/0xa8 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0xa8 returned 0 after 3906 usecs calling ata_init+0x0/0x3cc @ 1 initcall ata_init+0x0/0x3cc returned 0 after 0 usecs calling usb_init+0x0/0x100 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x100 returned 0 after 11718 usecs calling input_init+0x0/0x134 @ 1 initcall input_init+0x0/0x134 returned 0 after 0 usecs calling leds_init+0x0/0x5c @ 1 initcall leds_init+0x0/0x5c returned 0 after 0 usecs calling proto_init+0x0/0x4c @ 1 initcall proto_init+0x0/0x4c returned 0 after 0 usecs calling net_dev_init+0x0/0x11c @ 1 initcall net_dev_init+0x0/0x11c returned 0 after 0 usecs calling neigh_init+0x0/0x98 @ 1 initcall neigh_init+0x0/0x98 returned 0 after 0 usecs calling genl_init+0x0/0xec @ 1 initcall genl_init+0x0/0xec returned 0 after 15625 usecs calling sysctl_init+0x0/0x64 @ 1 initcall sysctl_init+0x0/0x64 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x14 @ 1 initcall clocksource_done_booting+0x0/0x14 returned 0 after 0 usecs calling init_pipe_fs+0x0/0x74 @ 1 initcall init_pipe_fs+0x0/0x74 returned 0 after 26 usecs calling init_mnt_writers+0x0/0x14 @ 1 initcall init_mnt_writers+0x0/0x14 returned 0 after 0 usecs calling anon_inode_init+0x0/0x120 @ 1 initcall anon_inode_init+0x0/0x120 returned 0 after 16 usecs calling chr_dev_init+0x0/0xc8 @ 1 initcall chr_dev_init+0x0/0xc8 returned 0 after 1985 usecs calling loopback_init+0x0/0x28 @ 1 initcall loopback_init+0x0/0x28 returned 0 after 353 usecs calling inet_init+0x0/0x224 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered initcall inet_init+0x0/0x224 returned 0 after 123457 usecs calling af_unix_init+0x0/0x6c @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x6c returned 0 after 8916 usecs calling populate_rootfs+0x0/0x130 @ 1 initcall populate_rootfs+0x0/0x130 returned 0 after 333 usecs calling register_powersave_nap_sysctl+0x0/0x2c @ 1 initcall register_powersave_nap_sysctl+0x0/0x2c returned 0 after 26 usecs calling serial_dev_init+0x0/0x148 @ 1 initcall serial_dev_init+0x0/0x148 returned 0 after 372 usecs calling setup_kcore+0x0/0xf4 @ 1 initcall setup_kcore+0x0/0xf4 returned 0 after 2 usecs calling __machine_initcall_asp834x_asp8347_declare_of_platform_devices+0x0/0x50 @ 1 initcall __machine_initcall_asp834x_asp8347_declare_of_platform_devices+0x0/0x50 returned 0 after 4417 usecs calling proc_execdomains_init+0x0/0x40 @ 1 initcall proc_execdomains_init+0x0/0x40 returned 0 after 18 usecs calling ioresources_init+0x0/0x68 @ 1 initcall ioresources_init+0x0/0x68 returned 0 after 6 usecs calling uid_cache_init+0x0/0xac @ 1 initcall uid_cache_init+0x0/0xac returned 0 after 38 usecs calling init_posix_timers+0x0/0x100 @ 1 initcall init_posix_timers+0x0/0x100 returned 0 after 12 usecs calling init_posix_cpu_timers+0x0/0xf0 @ 1 initcall init_posix_cpu_timers+0x0/0xf0 returned 0 after 1 usecs calling nsproxy_cache_init+0x0/0x44 @ 1 initcall nsproxy_cache_init+0x0/0x44 returned 0 after 9 usecs calling timekeeping_init_device+0x0/0x44 @ 1 initcall timekeeping_init_device+0x0/0x44 returned 0 after 347 usecs calling init_clocksource_sysfs+0x0/0x74 @ 1 initcall init_clocksource_sysfs+0x0/0x74 returned 0 after 347 usecs calling init_timer_list_procfs+0x0/0x4c @ 1 initcall init_timer_list_procfs+0x0/0x4c returned 0 after 16 usecs calling futex_init+0x0/0xa4 @ 1 initcall futex_init+0x0/0xa4 returned 0 after 22 usecs calling proc_dma_init+0x0/0x40 @ 1 initcall proc_dma_init+0x0/0x40 returned 0 after 4 usecs calling proc_modules_init+0x0/0x44 @ 1 initcall proc_modules_init+0x0/0x44 returned 0 after 3 usecs calling kallsyms_init+0x0/0x44 @ 1 initcall kallsyms_init+0x0/0x44 returned 0 after 3 usecs calling utsname_sysctl_init+0x0/0x2c @ 1 initcall utsname_sysctl_init+0x0/0x2c returned 0 after 51 usecs calling init_per_zone_pages_min+0x0/0x64 @ 1 initcall init_per_zone_pages_min+0x0/0x64 returned 0 after 16 usecs calling pdflush_init+0x0/0x28 @ 1 initcall pdflush_init+0x0/0x28 returned 0 after 140 usecs calling kswapd_init+0x0/0x2c @ 1 initcall kswapd_init+0x0/0x2c returned 0 after 69 usecs calling setup_vmstat+0x0/0xa0 @ 1 initcall setup_vmstat+0x0/0xa0 returned 0 after 24 usecs calling mm_sysfs_init+0x0/0x48 @ 1 initcall mm_sysfs_init+0x0/0x48 returned 0 after 19 usecs calling proc_vmalloc_init+0x0/0x44 @ 1 initcall proc_vmalloc_init+0x0/0x44 returned 0 after 6 usecs calling procswaps_init+0x0/0x44 @ 1 initcall procswaps_init+0x0/0x44 returned 0 after 3 usecs calling init_tmpfs+0x0/0x100 @ 1 initcall init_tmpfs+0x0/0x100 returned 0 after 89 usecs calling slab_proc_init+0x0/0x44 @ 1 initcall slab_proc_init+0x0/0x44 returned 0 after 9 usecs calling cpucache_init+0x0/0x28 @ 1 initcall cpucache_init+0x0/0x28 returned 0 after 4 usecs calling fasync_init+0x0/0x44 @ 1 initcall fasync_init+0x0/0x44 returned 0 after 16 usecs calling proc_filesystems_init+0x0/0x40 @ 1 initcall proc_filesystems_init+0x0/0x40 returned 0 after 6 usecs calling inotify_setup+0x0/0x14 @ 1 initcall inotify_setup+0x0/0x14 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xd8 @ 1 initcall inotify_user_setup+0x0/0xd8 returned 0 after 48 usecs calling aio_setup+0x0/0x9c @ 1 initcall aio_setup+0x0/0x9c returned 0 after 124 usecs calling proc_locks_init+0x0/0x44 @ 1 initcall proc_locks_init+0x0/0x44 returned 0 after 15 usecs calling init_mbcache+0x0/0x2c @ 1 initcall init_mbcache+0x0/0x2c returned 0 after 1 usecs calling dnotify_init+0x0/0x44 @ 1 initcall dnotify_init+0x0/0x44 returned 0 after 19 usecs calling proc_cmdline_init+0x0/0x40 @ 1 initcall proc_cmdline_init+0x0/0x40 returned 0 after 6 usecs calling proc_cpuinfo_init+0x0/0x40 @ 1 initcall proc_cpuinfo_init+0x0/0x40 returned 0 after 3 usecs calling proc_devices_init+0x0/0x44 @ 1 initcall proc_devices_init+0x0/0x44 returned 0 after 4 usecs calling proc_interrupts_init+0x0/0x44 @ 1 initcall proc_interrupts_init+0x0/0x44 returned 0 after 4 usecs calling proc_loadavg_init+0x0/0x40 @ 1 initcall proc_loadavg_init+0x0/0x40 returned 0 after 4 usecs calling proc_meminfo_init+0x0/0x40 @ 1 initcall proc_meminfo_init+0x0/0x40 returned 0 after 4 usecs calling proc_stat_init+0x0/0x40 @ 1 initcall proc_stat_init+0x0/0x40 returned 0 after 4 usecs calling proc_uptime_init+0x0/0x50 @ 1 initcall proc_uptime_init+0x0/0x50 returned 0 after 4 usecs calling proc_version_init+0x0/0x40 @ 1 initcall proc_version_init+0x0/0x40 returned 0 after 4 usecs calling proc_kcore_init+0x0/0x6c @ 1 initcall proc_kcore_init+0x0/0x6c returned 0 after 4 usecs calling proc_kmsg_init+0x0/0x40 @ 1 initcall proc_kmsg_init+0x0/0x40 returned 0 after 4 usecs calling proc_page_init+0x0/0x68 @ 1 initcall proc_page_init+0x0/0x68 returned 0 after 25 usecs calling init_devpts_fs+0x0/0x68 @ 1 initcall init_devpts_fs+0x0/0x68 returned 0 after 33 usecs calling init_ext3_fs+0x0/0x8c @ 1 initcall init_ext3_fs+0x0/0x8c returned 0 after 40 usecs calling journal_init+0x0/0xd8 @ 1 initcall journal_init+0x0/0xd8 returned 0 after 45 usecs calling init_ext2_fs+0x0/0x7c @ 1 initcall init_ext2_fs+0x0/0x7c returned 0 after 13 usecs calling init_ramfs_fs+0x0/0x28 @ 1 initcall init_ramfs_fs+0x0/0x28 returned 0 after 1 usecs calling init_nfs_fs+0x0/0x158 @ 1 initcall init_nfs_fs+0x0/0x158 returned 0 after 294 usecs calling init_nlm+0x0/0x4c @ 1 initcall init_nlm+0x0/0x4c returned 0 after 42 usecs calling init_jffs2_fs+0x0/0xe8 @ 1 JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. initcall init_jffs2_fs+0x0/0xe8 returned 0 after 13935 usecs calling ipc_init+0x0/0x38 @ 1 msgmni has been set to 246 initcall ipc_init+0x0/0x38 returned 0 after 7116 usecs calling ipc_sysctl_init+0x0/0x2c @ 1 initcall ipc_sysctl_init+0x0/0x2c returned 0 after 81 usecs calling crypto_algapi_init+0x0/0x24 @ 1 initcall crypto_algapi_init+0x0/0x24 returned 0 after 10 usecs calling chainiv_module_init+0x0/0x28 @ 1 initcall chainiv_module_init+0x0/0x28 returned 0 after 3 usecs calling eseqiv_module_init+0x0/0x28 @ 1 initcall eseqiv_module_init+0x0/0x28 returned 0 after 1 usecs calling md5_mod_init+0x0/0x28 @ 1 initcall md5_mod_init+0x0/0x28 returned 0 after 200 usecs calling crypto_cbc_module_init+0x0/0x28 @ 1 initcall crypto_cbc_module_init+0x0/0x28 returned 0 after 3 usecs calling des_generic_mod_init+0x0/0x5c @ 1 initcall des_generic_mod_init+0x0/0x5c returned 0 after 365 usecs calling krng_mod_init+0x0/0x28 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x28 returned 0 after 8163 usecs calling proc_genhd_init+0x0/0x68 @ 1 initcall proc_genhd_init+0x0/0x68 returned 0 after 27 usecs calling noop_init+0x0/0x2c @ 1 io scheduler noop registered initcall noop_init+0x0/0x2c returned 0 after 7615 usecs calling as_init+0x0/0x2c @ 1 io scheduler anticipatory registered (default) initcall as_init+0x0/0x2c returned 0 after 12187 usecs calling deadline_init+0x0/0x2c @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x2c returned 0 after 8630 usecs calling cfq_init+0x0/0xc4 @ 1 io scheduler cfq registered initcall cfq_init+0x0/0xc4 returned 0 after 7361 usecs calling pci_init+0x0/0x50 @ 1 initcall pci_init+0x0/0x50 returned 0 after 17 usecs calling pci_proc_init+0x0/0x94 @ 1 initcall pci_proc_init+0x0/0x94 returned 0 after 31 usecs calling am_CoralP_fb_init+0x0/0x34 @ 1 ******** driver_probe_device.191 - called from c019b038 bus: 'pci': driver_probe_device: checking device 0000:00:0c.0 with driver CoralP_fb ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 AM Coral-P FB [1024x768x24] at 0xc0000000..0xc3ffffff [0xc9080000] fb0: Coral-P frame buffer device at 0xc0000000 initcall am_CoralP_fb_init+0x0/0x34 returned 0 after 110331 usecs calling rand_initialize+0x0/0x48 @ 1 initcall rand_initialize+0x0/0x48 returned 0 after 66 usecs calling tty_init+0x0/0x128 @ 1 initcall tty_init+0x0/0x128 returned 0 after 16036 usecs calling pty_init+0x0/0x4c4 @ 1 initcall pty_init+0x0/0x4c4 returned 0 after 333414 usecs calling serial8250_init+0x0/0x140 @ 1 Serial: 8250/16550 driver 4 ports, IRQ sharing disabled ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device serial8250.0 with driver serial8250 ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 serial8250.0: ttyS0 at MMIO 0xff004500 (irq = 16) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xff004600 (irq = 20) is a 16550A ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device serial8250 with driver serial8250 ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 initcall serial8250_init+0x0/0x140 returned 0 after 226222 usecs calling serial8250_pci_init+0x0/0x34 @ 1 initcall serial8250_pci_init+0x0/0x34 returned 0 after 260 usecs calling brd_init+0x0/0x1e0 @ 1 brd: module loaded initcall brd_init+0x0/0x1e0 returned 0 after 12623 usecs calling loop_init+0x0/0x1c0 @ 1 loop: module loaded initcall loop_init+0x0/0x1c0 returned 0 after 9509 usecs calling gfar_init+0x0/0x50 @ 1 ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device fsl-gianfar_mdio.14 with driver fsl-gianfar_mdio ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 ******** driver_probe_device.191 - called from c019a250 bus: 'mdio_bus': driver_probe_device: checking device 24520:00 with driver Generic PHY ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'mdio_bus': driver_probe_device: checking device 24520:01 with driver Generic PHY ******** driver_probe_device.196 - called from c019a250 Gianfar MII Bus: probed ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device fsl-gianfar.0 with driver fsl-gianfar ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 eth0: Gianfar Ethernet Controller Version 1.2, 00:07:d2:01:00:2e eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device fsl-gianfar.1 with driver fsl-gianfar ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 eth1: Gianfar Ethernet Controller Version 1.2, 00:07:d2:01:00:2f eth1: Running with NAPI enabled eth1: 256/256 RX/TX BD ring size initcall gfar_init+0x0/0x50 returned 0 after 437415 usecs calling smsc_init+0x0/0x78 @ 1 initcall smsc_init+0x0/0x78 returned 0 after 549 usecs calling net_olddevs_init+0x0/0xe8 @ 1 initcall net_olddevs_init+0x0/0xe8 returned 0 after 16 usecs calling init_sd+0x0/0x148 @ 1 Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0x148 returned 0 after 15238 usecs calling init_sg+0x0/0x178 @ 1 initcall init_sg+0x0/0x178 returned 0 after 235 usecs calling sil_init+0x0/0x34 @ 1 ******** driver_probe_device.191 - called from c019b038 bus: 'pci': driver_probe_device: checking device 0000:00:0b.0 with driver sata_sil ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 sata_sil 0000:00:0b.0: cache line size not set. Driver may not function sata_sil 0000:00:0b.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil ******** driver_probe_device.191 - called from c019a250 bus: 'scsi': driver_probe_device: checking device host0 with driver sd ******** driver_probe_device.196 - called from c019a250 scsi1 : sata_sil ******** driver_probe_device.191 - called from c019a250 bus: 'scsi': driver_probe_device: checking device host1 with driver sd ******** driver_probe_device.196 - called from c019a250 ata1: SATA max UDMA/100 mmio m512@0xc4080000 tf 0xc4080080 irq 22 ata2: SATA max UDMA/100 mmio m512@0xc4080000 tf 0xc40800c0 irq 22 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-4: TS8GSSD25S-S, 20080128, max UDMA/66 ata1.00: 15924384 sectors, multi 0: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/66 ata2: SATA link down (SStatus 0 SControl 310) scsi 0:0:0:0: Direct-Access ATA TS8GSSD25S-S 2008 PQ: 0 ANSI: 5 ******** driver_probe_device.191 - called from c019a250 bus: 'scsi': driver_probe_device: checking device target0:0:0 with driver sd ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'scsi': driver_probe_device: checking device 0:0:0:0 with driver sd ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 sd 0:0:0:0: [sda] 15924384 512-byte hardware sectors: (8.15 GB/7.59 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 15924384 512-byte hardware sectors: (8.15 GB/7.59 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 initcall sil_init+0x0/0x34 returned 0 after 4628091 usecs calling sil24_init+0x0/0x34 @ 1 initcall sil24_init+0x0/0x34 returned 0 after 229 usecs calling init_mtd+0x0/0x50 @ 1 initcall init_mtd+0x0/0x50 returned 0 after 27 usecs calling redboot_parser_init+0x0/0x28 @ 1 initcall redboot_parser_init+0x0/0x28 returned 0 after 0 usecs calling init_mtdchar+0x0/0xb0 @ 1 initcall init_mtdchar+0x0/0xb0 returned 0 after 206 usecs calling init_mtdblock+0x0/0x28 @ 1 initcall init_mtdblock+0x0/0x28 returned 0 after 112 usecs calling cfi_probe_init+0x0/0x2c @ 1 initcall cfi_probe_init+0x0/0x2c returned 0 after 1 usecs calling of_flash_init+0x0/0x34 @ 1 ******** driver_probe_device.191 - called from c019b038 bus: 'of_platform': driver_probe_device: checking device f0000000.flash with driver of-flash ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 do_map_probe('cfi_probe') f0000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 f0000000.flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available Searching for RedBoot partition table in f0000000.flash at offset 0x1fe0000 8 RedBoot partitions found on MTD device f0000000.flash Creating 8 MTD partitions on "f0000000.flash": 0x00000000-0x00020000 : "(reserved)" 0x00020000-0x00080000 : "RedBoot" 0x00080000-0x000c0000 : "ASP8347DB.FPGA" 0x000c0000-0x008c0000 : "JFFS2" 0x008c0000-0x00aa0000 : "linux" 0x00aa0000-0x01fe0000 : "unallocated" 0x01fe0000-0x01fff000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x01fff000-0x02000000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only initcall of_flash_init+0x0/0x34 returned 0 after 392933 usecs calling mon_init+0x0/0x114 @ 1 usbmon: debugfs is not available initcall mon_init+0x0/0x114 returned -19 after 8662 usecs calling ehci_hcd_init+0x0/0x148 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device fsl-ehci.0 with driver fsl-ehci ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 39, io base 0xff022000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb1 with driver usbfs ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb1 with driver hub ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb1 with driver usb ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 usb usb1: configuration #1 chosen from 1 choice ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device 1-0:1.0 with driver usbfs ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device 1-0:1.0 with driver hub ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Freescale On-Chip EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-svn5105 ehci_hcd usb usb1: SerialNumber: fsl-ehci.0 ******** driver_probe_device.191 - called from c019b038 bus: 'platform': driver_probe_device: checking device fsl-ehci.1 with driver fsl-ehci ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 38, io base 0xff023000 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb2 with driver usbfs ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb2 with driver hub ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device usb2 with driver usb ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 usb usb2: configuration #1 chosen from 1 choice ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device 2-0:1.0 with driver usbfs ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'usb': driver_probe_device: checking device 2-0:1.0 with driver hub ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Freescale On-Chip EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-svn5105 ehci_hcd usb usb2: SerialNumber: fsl-ehci.1 initcall ehci_hcd_init+0x0/0x148 returned 0 after 4374071 usecs calling evdev_init+0x0/0x28 @ 1 initcall evdev_init+0x0/0x28 returned 0 after 2 usecs calling tsc2007_init+0x0/0x4c @ 1 ******** tsc2007_init.394 - called from c0003874 ************** i2c_register_driver.711 ************** i2c_register_driver.716 ************** i2c_register_driver.735 ************** i2c_register_driver.742 ************** i2c_register_driver.747 initcall tsc2007_init+0x0/0x4c returned 0 after 64006 usecs calling i2c_dev_init+0x0/0xcc @ 1 i2c /dev entries driver ************** i2c_register_driver.711 ************** i2c_register_driver.716 ************** i2c_register_driver.735 ************** i2c_register_driver.742 ************** i2c_register_driver.747 initcall i2c_dev_init+0x0/0xcc returned 0 after 57860 usecs calling fsl_i2c_init+0x0/0x58 @ 1 ******** driver_probe_device.191 - called from c019b038 bus: 'of_platform': driver_probe_device: checking device ff003000.i2c with driver mpc-i2c ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 ********* i2c_detect.1352 ********* i2c_detect.1352 ********* i2c_detect.1352 ******** driver_probe_device.191 - called from c019b038 bus: 'of_platform': driver_probe_device: checking device ff003100.i2c with driver mpc-i2c ******** driver_probe_device.196 - called from c019b038 ******** driver_probe_device.200 - called from c019b038 ******** driver_probe_device.204 - called from c019b038 ********* i2c_detect.1352 ********* i2c_detect.1352 ********* i2c_detect.1352 ++++++++ OF I2C 'tsc2007' ******** driver_probe_device.191 - called from c019a250 bus: 'i2c': driver_probe_device: checking device 1-0048 with driver dummy ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'i2c': driver_probe_device: checking device 1-0048 with driver tsc2007 ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.200 - called from c019a250 ******** driver_probe_device.204 - called from c019a250 ******** i2c_device_probe.108 - driver: c03a5fc0, probe: c0205158, id_table: c03a6030, called from: c019aeb8 ******** tsc2007_probe.273 - called from c0205bb8 tsc2007 1-0048: i2c io error: -5 tsc2007 1-0048: i2c io error: -5 tsc2007 1-0048: i2c io error: -5 tsc2007 1-0048: i2c io error: -5 tsc2007 1-0048: i2c io error: -5 input: TSC2007 Touchscreen as /devices/virtual/input/input0 tsc2007 1-0048: registered with irq (24) ++++++++ OF I2C 'leds-pca955x' ******** driver_probe_device.191 - called from c019a250 bus: 'i2c': driver_probe_device: checking device 1-0060 with driver dummy ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'i2c': driver_probe_device: checking device 1-0060 with driver tsc2007 ******** driver_probe_device.196 - called from c019a250 ******** driver_probe_device.191 - called from c019a250 bus: 'i2c': driver_probe_device: checking device 1-0060 with driver dev_driver ******** driver_probe_device.196 - called from c019a250 initcall fsl_i2c_init+0x0/0x58 returned 0 after 621569 usecs calling pca955x_leds_init+0x0/0x50 @ 1 ******** pca955x_leds_init.388 - called from c0003874 ************** i2c_register_driver.711 ************** i2c_register_driver.716 ************** i2c_register_driver.735 ************** i2c_register_driver.742 ************** i2c_register_driver.747 ************** __attach_adapter.685 ********* i2c_detect.1352 ************** __attach_adapter.689 ************** __attach_adapter.693 ************** __attach_adapter.685 ********* i2c_detect.1352 ************** __attach_adapter.689 ************** __attach_adapter.693 initcall pca955x_leds_init+0x0/0x50 returned 0 after 135556 usecs calling hid_init+0x0/0x88 @ 1 initcall hid_init+0x0/0x88 returned 0 after 300 usecs calling a4_init+0x0/0x34 @ 1 initcall a4_init+0x0/0x34 returned 0 after 339 usecs calling apple_init+0x0/0x5c @ 1 initcall apple_init+0x0/0x5c returned 0 after 404 usecs calling belkin_init+0x0/0x34 @ 1 initcall belkin_init+0x0/0x34 returned 0 after 229 usecs calling bright_init+0x0/0x34 @ 1 initcall bright_init+0x0/0x34 returned 0 after 201 usecs calling ch_init+0x0/0x34 @ 1 initcall ch_init+0x0/0x34 returned 0 after 197 usecs calling ch_init+0x0/0x34 @ 1 initcall ch_init+0x0/0x34 returned 0 after 197 usecs calling cp_init+0x0/0x34 @ 1 initcall cp_init+0x0/0x34 returned 0 after 198 usecs calling dell_init+0x0/0x34 @ 1 initcall dell_init+0x0/0x34 returned 0 after 197 usecs calling ez_init+0x0/0x34 @ 1 initcall ez_init+0x0/0x34 returned 0 after 214 usecs calling gyration_init+0x0/0x34 @ 1 initcall gyration_init+0x0/0x34 returned 0 after 201 usecs calling lg_init+0x0/0x34 @ 1 initcall lg_init+0x0/0x34 returned 0 after 203 usecs calling ms_init+0x0/0x34 @ 1 initcall ms_init+0x0/0x34 returned 0 after 208 usecs calling mr_init+0x0/0x34 @ 1 initcall mr_init+0x0/0x34 returned 0 after 206 usecs calling pl_init+0x0/0x34 @ 1 initcall pl_init+0x0/0x34 returned 0 after 201 usecs calling pl_init+0x0/0x34 @ 1 initcall pl_init+0x0/0x34 returned 0 after 205 usecs calling samsung_init+0x0/0x34 @ 1 initcall samsung_init+0x0/0x34 returned 0 after 202 usecs calling sony_init+0x0/0x34 @ 1 initcall sony_init+0x0/0x34 returned 0 after 205 usecs calling sp_init+0x0/0x34 @ 1 initcall sp_init+0x0/0x34 returned 0 after 221 usecs calling hid_init+0x0/0xa0 @ 1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0xa0 returned 0 after 21640 usecs calling sysctl_core_init+0x0/0x44 @ 1 initcall sysctl_core_init+0x0/0x44 returned 0 after 173 usecs calling flow_cache_init+0x0/0x13c @ 1 initcall flow_cache_init+0x0/0x13c returned 0 after 57 usecs calling sysctl_ipv4_init+0x0/0x68 @ 1 initcall sysctl_ipv4_init+0x0/0x68 returned 0 after 889 usecs calling init_syncookies+0x0/0x30 @ 1 initcall init_syncookies+0x0/0x30 returned 0 after 142 usecs calling xfrm4_beet_init+0x0/0x2c @ 1 initcall xfrm4_beet_init+0x0/0x2c returned 0 after 2 usecs calling xfrm4_transport_init+0x0/0x2c @ 1 initcall xfrm4_transport_init+0x0/0x2c returned 0 after 0 usecs calling xfrm4_mode_tunnel_init+0x0/0x2c @ 1 initcall xfrm4_mode_tunnel_init+0x0/0x2c returned 0 after 0 usecs calling inet_diag_init+0x0/0x94 @ 1 initcall inet_diag_init+0x0/0x94 returned 0 after 22 usecs calling tcp_diag_init+0x0/0x28 @ 1 initcall tcp_diag_init+0x0/0x28 returned 0 after 1 usecs calling cubictcp_register+0x0/0x8c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x8c returned 0 after 5609 usecs calling packet_init+0x0/0x5c @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x5c returned 0 after 9199 usecs calling init_sunrpc+0x0/0x78 @ 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. initcall init_sunrpc+0x0/0x78 returned 0 after 20254 usecs calling init_rpcsec_gss+0x0/0x58 @ 1 initcall init_rpcsec_gss+0x0/0x58 returned 0 after 20 usecs calling init_kerberos_module+0x0/0x4c @ 1 initcall init_kerberos_module+0x0/0x4c returned 0 after 8 usecs calling init_oops_id+0x0/0x44 @ 1 initcall init_oops_id+0x0/0x44 returned 0 after 18 usecs calling disable_boot_consoles+0x0/0x6c @ 1 initcall disable_boot_consoles+0x0/0x6c returned 0 after 0 usecs calling pm_qos_power_init+0x0/0xd0 @ 1 initcall pm_qos_power_init+0x0/0xd0 returned 0 after 1553 usecs calling random32_reseed+0x0/0x78 @ 1 initcall random32_reseed+0x0/0x78 returned 0 after 29 usecs calling pci_sysfs_init+0x0/0x6c @ 1 initcall pci_sysfs_init+0x0/0x6c returned 0 after 81 usecs calling seqgen_init+0x0/0x28 @ 1 initcall seqgen_init+0x0/0x28 returned 0 after 55 usecs calling scsi_complete_async_scans+0x0/0x104 @ 1 initcall scsi_complete_async_scans+0x0/0x104 returned 0 after 0 usecs calling tcp_congestion_default+0x0/0xc @ 1 initcall tcp_congestion_default+0x0/0xc returned 0 after 1 usecs calling ip_auto_config+0x0/0xe60 @ 1 initcall ip_auto_config+0x0/0xe60 returned 0 after 18 usecs VFS: Mounted root (jffs2 filesystem). Mounting /dev & creating initial devices Freeing unused kernel memory: 176k init init started: BusyBox v1.10.4 (2009-05-29 06:37:47 MDT) starting pid 926, tty '/dev/console': '/etc/init.d/rcS' mounting filesystems...done. running rc.d services... starting udev mounting tmpfs at /dev creating static nodes starting udevd...done waiting for devices...done starting network interfaces... OSELAS(R)-amltd_ppc-1 (PTXdist-1.99.svn/2009-08-05T09:01:53-0600) _ _ _ __ _ __ ___ | |_ __ _ _ __ __ _ ___| |_ | '_ \| '_ \ / __| | __/ _` | '__/ _` |/ _ \ __| | |_) | |_) | (__ | || (_| | | | (_| | __/ |_ | .__/| .__/ \___|___\__\__,_|_| \__, |\___|\__| |_| |_| |_____| |___/ Starting Dropbear SSH server: modprobe: FATAL: Could not load /lib/modules/2.6.28-svn5105/modu ppc_target login: PHY: 24520:01 - Link is Up - 100/Full PHY: 24520:00 - Link is Up - 100/Full --------------060708010905050305060201--