linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Felix Radensky <felix@embedded-sol.com>
To: "Ira W. Snyder" <iws@ovro.caltech.edu>
Cc: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: Re: [PATCH 0/8] fsldma: lockup fixes
Date: Mon, 28 Feb 2011 23:27:40 +0200	[thread overview]
Message-ID: <4D6C134C.4070407@embedded-sol.com> (raw)
In-Reply-To: <20110228211103.GB31428@ovro.caltech.edu>

Hi Ira,

On 02/28/2011 11:11 PM, Ira W. Snyder wrote:
> On Mon, Feb 28, 2011 at 10:15:49PM +0200, Felix Radensky wrote:
>> Hi Ira,
>>
>>> Thank you very much Felix. The dmesg output shows that the controller
>>> never got an interrupt for the second transaction. The patch below has
>>> extra debugging information that may help determine why this happens.
>>> Please apply it and re-run the test.
>>>
>>> The last section of dmesg (after "Freeing unused kernel memory") is all
>>> I need.
>>>
>> Attached relevant dmesg portion.
>>
> Ok, try this patch on top of the last one.
>
> It looks like you used the dmatest module in multi-channel mode last
> time. One channel makes it easier to debug:
>
> modprobe dmatest max_channels=1 threads_per_chan=2 iterations=1
>
> Thanks for your help in debugging this. Hopefully this is the last
> patch to test. :)
>
> Ira
>

Looks like this was not the last one. The test still fails, see below

__dma_request_channel: success (dma0chan0)
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380000 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380060 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef3800c0 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380120 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380180 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef3801e0 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: assign cookies: start=0
of:fsl-elo-dma ffe0c300.dma: chan0: assign cookies: end=6
of:fsl-elo-dma ffe0c300.dma: chan0: idle, starting controller
dmatest: Started 2 threads using dma0chan0
of:fsl-elo-dma ffe0c300.dma: chan0: irq: stat = 0x8
of:fsl-elo-dma ffe0c300.dma: chan0: irq: End-of-link INT
of:fsl-elo-dma ffe0c300.dma: chan0: irq: Exit
of:fsl-elo-dma ffe0c300.dma: chan0: tasklet entry
of:fsl-elo-dma ffe0c300.dma: chan0: completed_cookie=6
of:fsl-elo-dma ffe0c300.dma: chan0: no pending LDs
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380000 callback
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380000 free
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380060 free
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef3800c0 free
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380120 free
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380180 free
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef3801e0 free
of:fsl-elo-dma ffe0c300.dma: chan0: tasklet exit
dma0chan0-copy0: verifying source buffer...
dma0chan0-copy0: verifying dest buffer...
dma0chan0-copy0: #0: No errors with src_off=0xf92 dst_off=0xf46 len=0x14ad
dma0chan0-copy0: terminating after 1 tests, 0 failures (status 0)
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef3801e0 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380180 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: LD ef380120 allocated
of:fsl-elo-dma ffe0c300.dma: chan0: assign cookies: start=6
of:fsl-elo-dma ffe0c300.dma: chan0: assign cookies: end=9
of:fsl-elo-dma ffe0c300.dma: chan0: idle, starting controller
dma0chan0-copy1: #0: test timed out
dma0chan0-copy1: terminating after 1 tests, 1 failures (status 0)

Felix.

  reply	other threads:[~2011-02-28 21:27 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-28 18:47 [PATCH 0/8] fsldma: lockup fixes Felix Radensky
2011-02-28 19:53 ` Ira W. Snyder
2011-02-28 20:15   ` Felix Radensky
2011-02-28 21:11     ` Ira W. Snyder
2011-02-28 21:27       ` Felix Radensky [this message]
2011-03-01  0:21         ` Ira W. Snyder
2011-03-01  5:46           ` Felix Radensky
2011-03-01  5:52           ` Felix Radensky
2011-03-01 16:55             ` Ira W. Snyder
2011-03-01 19:52               ` Ira W. Snyder
2011-03-02  5:49                 ` Felix Radensky
2011-03-02 16:42                   ` Ira W. Snyder
  -- strict thread matches above, loose matches on Subject: below --
2011-02-28 11:36 Felix Radensky
2011-02-28 17:16 ` Ira W. Snyder
2011-02-26  0:23 Ira W. Snyder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D6C134C.4070407@embedded-sol.com \
    --to=felix@embedded-sol.com \
    --cc=iws@ovro.caltech.edu \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).