Re: [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

[Scott Wood <scottwood@freescale.com>]

On 11/23/2011 06:41 PM, b35362@freescale.com wrote:
> From: Liu Shuo <b35362@freescale.com>
> 
> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
> to support the Nand flash chip whose page size is larger than 2K bytes,
> we read/write 2k data repeatedly by issuing FIR_OP_RB/FIR_OP_WB and save
> them to a large buffer.
> 
> Signed-off-by: Liu Shuo <b35362@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> ---
>  drivers/mtd/nand/fsl_elbc_nand.c |  211 +++++++++++++++++++++++++++++++++++---
>  1 files changed, 194 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
> index d634c5f..c96e714 100644
> --- a/drivers/mtd/nand/fsl_elbc_nand.c
> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
> @@ -55,7 +55,9 @@ struct fsl_elbc_mtd {
>  	struct device *dev;
>  	int bank;               /* Chip select bank number           */
>  	u8 __iomem *vbase;      /* Chip select base virtual address  */
> -	int page_size;          /* NAND page size (0=512, 1=2048)    */
> +	int page_size;          /* NAND page size, the mutiple of 2048.
> +				 * (0=512, 1=2048, 2=4096, 4=8192....)
> +				 */

Again, please remove this.  It was sort-of reasonable when it was a
boolean that selected between slightly different programming models.  It
doesn't make sense as "mtd->writesize == 512 ? 0 : mtd->writesize / 512".

What is the plan for migrating bad block markers on first use?

-Scott