From: Timur Tabi <timur@freescale.com>
To: Kumar Gala <kumar.gala@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 2/2] powerpc/85xx: add a 32-bit P1022DS device tree
Date: Mon, 5 Dec 2011 17:44:31 -0600 [thread overview]
Message-ID: <4EDD575F.6010006@freescale.com> (raw)
In-Reply-To: <D5BD2D7D-4549-42A7-8BA6-9B3C84DB5E85@freescale.com>
Kumar Gala wrote:
> look at how mpc8572ds handles 36b.dts we put common definitions in a shared file.
Ok, I've made those changes, but when I boot the kernel, I'm seeing this. Can you give me a clue as to what's wrong?
PCI: Probing PCI hardware
pci 0000:00:00.0: [1957:0110] type 1 class 0x000b20
pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:02:00.0: [1957:0110] type 1 class 0x000b20
pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01)
pci 0001:02:00.0: supports D1 D2
pci 0001:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:02:00.0: PME# disabled
pci 0001:02:00.0: PCI bridge to [bus 03-ff]
pci 0002:04:00.0: [1957:0110] type 1 class 0x000b20
pci 0002:04:00.0: ignoring class b20 (doesn't match header type 01)
pci 0002:04:00.0: supports D1 D2
pci 0002:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:04:00.0: PME# disabled
pci 0002:05:00.0: [8086:10d3] type 0 class 0x000200
pci 0002:05:00.0: reg 10: [mem 0x80000000-0x8001ffff]
pci 0002:05:00.0: reg 14: [mem 0x80080000-0x800fffff]
pci 0002:05:00.0: reg 18: [io 0x1000-0x101f]
pci 0002:05:00.0: reg 1c: [mem 0x80100000-0x80103fff]
pci 0002:05:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0002:05:00.0: PME# supported from D0 D3hot D3cold
pci 0002:05:00.0: PME# disabled
pci 0002:04:00.0: PCI bridge to [bus 05-ff]
pci 0002:04:00.0: bridge window [mem 0x80000000-0x801fffff]
PCI: Cannot allocate resource region 0 of device 0002:05:00.0, will remap
PCI: Cannot allocate resource region 1 of device 0002:05:00.0, will remap
PCI: Cannot allocate resource region 3 of device 0002:05:00.0, will remap
PCI 0000:00 Cannot reserve Legacy IO [io 0xffbed000-0xffbedfff]
PCI 0001:02 Cannot reserve Legacy IO [io 0xffbdb000-0xffbdbfff]
PCI 0002:04 Cannot reserve Legacy IO [io 0xffbc9000-0xffbc9fff]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0: bridge window [io 0xffbed000-0xffbfcfff]
pci 0000:00:00.0: bridge window [mem 0xa0000000-0xbfffffff]
pci 0001:02:00.0: PCI bridge to [bus 03-03]
pci 0001:02:00.0: bridge window [io 0xffbdb000-0xffbeafff]
pci 0001:02:00.0: bridge window [mem 0xc0000000-0xdfffffff]
pci 0002:04:00.0: BAR 9: can't assign mem pref (size 0x100000)
pci 0002:05:00.0: BAR 1: assigned [mem 0x80000000-0x8007ffff]
pci 0002:05:00.0: BAR 1: set to [mem 0x80000000-0x8007ffff] (PCI address [0xe000
0000-0xe007ffff])
pci 0002:05:00.0: BAR 6: assigned [mem 0x80080000-0x800bffff pref]
pci 0002:05:00.0: BAR 0: assigned [mem 0x800c0000-0x800dffff]
pci 0002:05:00.0: BAR 0: set to [mem 0x800c0000-0x800dffff] (PCI address [0xe00c
0000-0xe00dffff])
pci 0002:05:00.0: BAR 3: assigned [mem 0x800e0000-0x800e3fff]
pci 0002:05:00.0: BAR 3: set to [mem 0x800e0000-0x800e3fff] (PCI address [0xe00e
0000-0xe00e3fff])
pci 0002:04:00.0: PCI bridge to [bus 05-05]
pci 0002:04:00.0: bridge window [io 0xffbc9000-0xffbd8fff]
pci 0002:04:00.0: bridge window [mem 0x80000000-0x9fffffff]
pci 0000:00:00.0: enabling device (0106 -> 0107)
pci 0001:02:00.0: enabling device (0106 -> 0107)
pci 0002:04:00.0: enabling device (0106 -> 0107)
pci_bus 0000:00: resource 0 [io 0xffbed000-0xffbfcfff]
pci_bus 0000:00: resource 1 [mem 0xa0000000-0xbfffffff]
pci_bus 0000:01: resource 0 [io 0xffbed000-0xffbfcfff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xbfffffff]
pci_bus 0001:02: resource 0 [io 0xffbdb000-0xffbeafff]
pci_bus 0001:02: resource 1 [mem 0xc0000000-0xdfffffff]
pci_bus 0001:03: resource 0 [io 0xffbdb000-0xffbeafff]
pci_bus 0001:03: resource 1 [mem 0xc0000000-0xdfffffff]
pci_bus 0002:04: resource 0 [io 0xffbc9000-0xffbd8fff]
pci_bus 0002:04: resource 1 [mem 0x80000000-0x9fffffff]
pci_bus 0002:05: resource 0 [io 0xffbc9000-0xffbd8fff]
pci_bus 0002:05: resource 1 [mem 0x80000000-0x9fffffff]
--
Timur Tabi
Linux kernel developer at Freescale
prev parent reply other threads:[~2011-12-05 23:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-02 22:08 [PATCH 1/2] powerpc/85xx: fix localbus and PCI addresses in the P1022DS 36-bit device tree Timur Tabi
2011-12-02 22:08 ` [PATCH 2/2] powerpc/85xx: add a 32-bit P1022DS " Timur Tabi
2011-12-02 22:19 ` Scott Wood
2011-12-02 22:24 ` Timur Tabi
2011-12-02 22:34 ` Scott Wood
2011-12-02 23:41 ` Timur Tabi
2011-12-02 23:50 ` Scott Wood
2011-12-02 23:03 ` Kumar Gala
2011-12-05 23:44 ` Timur Tabi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EDD575F.6010006@freescale.com \
--to=timur@freescale.com \
--cc=kumar.gala@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).