Sorry I'm not sure what the state of 5200 support in the eldk.  I know that
Wolfgang
has said that 2.6 is not supported though.  You may want to try out Sylvains

kernel:  http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git

You can search in list for Syvains instructions on how to use it.


On 3/28/06, Matthias Fechner <idefix@fechner.net> wrote:
>
> Hello John,
>
> * John Rigby <jcrigby@gmail.com> [27-03-06 18:01]:
> > try make lite5200_defconfig instead of copying it to .config
> > or make oldconfig after copying ti to .config
>
> I tried now several combinations with:
> make ARCH=ppc CROSS_COMPILE=ppc_6xx- lite5200_defconfig
> make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage
>
> then coping the file to .config and
> make ARCH=ppc CROSS_COMPILE=ppc_6xx- oldconfig
> make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage
>
> but it always leads to the same error message...
>
> Best regards,
> Matthias
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>