From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from xproxy.gmail.com (xproxy.gmail.com [66.249.82.192]) by ozlabs.org (Postfix) with ESMTP id F285C686AD for ; Thu, 10 Nov 2005 16:04:19 +1100 (EST) Received: by xproxy.gmail.com with SMTP id i27so486009wxd for ; Wed, 09 Nov 2005 21:04:18 -0800 (PST) Message-ID: <4fb800d20511092057x47622b95vca0153c069ac97e@mail.gmail.com> Date: Wed, 9 Nov 2005 23:57:39 -0500 From: Nitesh Guinde To: linuxppc-embedded@ozlabs.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_19927_28560746.1131598659770" Subject: "Now booting the kernel" List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , ------=_Part_19927_28560746.1131598659770 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello all, I am loading a linux kernel onto ML310 board .I want networking support and hence I have a pci enabled design. I am using linux 2.4 powerpc devel kernel. I have also tried the montavista previewkit But I end up with the same problem. I have enabled the option " support for early boot texts: in the kernel debugging. Now once run the kernel program in powerpc I get the following essages in the serial minicom terminal Enter Desired System ACE CF Configuration <0-7>. 0: ACE-loader. 1: Linux w/PCI. 2: VxWorks w/PCI. 3: QNX Demo. 4: Linux EDK Base Build. 5: VxWorks EDK Base Build. 6: User Configuration A. 7: User Configuration B. Select: loaded at: 00400000 008CB1E0 board data at: 008C8138 008C8150 relocated to: 00405308 00405320 zimage at: 00405813 004DE42A initrd at: 004DF000 008C7382 avail ram: 008CC000 10000000 Linux/PPC load: console=3DttyS0,9600 root=3D/dev/xsysace/disc0/part2 rw Uncompressing Linux...done. Now booting the kernel The prompt goes dead at this point.The board details is available at www.xilinx.com/ml310 Any workarounds? Thanks, Nitesh ------=_Part_19927_28560746.1131598659770 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline

Hello all,
I am loading a linux kernel onto ML310 board .I want netwo= rking support and hence I have a pci enabled design.
I am using linux 2.= 4 powerpc devel kernel. I have also tried the montavista previewkit
But = I end up with the same problem. I have enabled the option " support fo= r early boot texts: in the kernel debugging.
Now once run the kernel program in powerpc I get the following essages = in the serial minicom terminal
Enter Desired System ACE CF Configuration= <0-7>.
   0: ACE-loader.
   1: Linux w/P= CI.
   2: VxWorks w/PCI.=20
   3: QNX Demo.
   4: Linux EDK Base Build.    5: VxWorks EDK Base Build.
   6: User Configura= tion A.
   7: User Configuration B.


Select:
loaded at:     00400000 008CB1E0 board data at: 008C8138 008C8150
relocated to:  00405308 00405320=
zimage at:     00405813 004DE42A
initrd at:&nb= sp;    004DF000 008C7382
avail ram:   &nb= sp; 008CC000 10000000=20


Linux/PPC load: console=3DttyS0,9600 root=3D/dev/xsysace/disc0/part2= rw
Uncompressing Linux...done.
Now booting the kernel

 

 


The prompt goes dead at this point.The board details is available at= www.xilinx.com/ml310

Any workarounds?

Thanks,

Nitesh

------=_Part_19927_28560746.1131598659770--