From: Sean Anderson <sean.anderson@seco.com>
To: Rob Herring <robh@kernel.org>
Cc: "Kishon Vijay Abraham I" <kishon@kernel.org>,
devicetree@vger.kernel.org, "Fernández Rojas" <noltari@gmail.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Madalin Bucur" <madalin.bucur@nxp.com>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Jonas Gorski" <jonas.gorski@gmail.com>,
linux-gpio@vger.kernel.org, "Vinod Koul" <vkoul@kernel.org>,
"Camelia Alexandra Groza" <camelia.groza@nxp.com>,
"Bagas Sanjaya" <bagasdotme@gmail.com>,
"Ioana Ciornei" <ioana.ciornei@nxp.com>,
linux-phy@lists.infradead.org, linuxppc-dev@lists.ozlabs.org,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v10 03/13] dt-bindings: Convert gpio-mmio to yaml
Date: Thu, 9 Mar 2023 11:03:38 -0500 [thread overview]
Message-ID: <4fbd84ff-8a0c-669c-2f27-d542640ded24@seco.com> (raw)
In-Reply-To: <20230308231018.GA4039466-robh@kernel.org>
On 3/8/23 18:10, Rob Herring wrote:
> On Mon, Mar 06, 2023 at 02:15:25PM -0500, Sean Anderson wrote:
>> This is a generic binding for simple MMIO GPIO controllers. Although we
>> have a single driver for these controllers, they were previously spread
>> over several files. Consolidate them. The register descriptions are
>> adapted from the comments in the source. There is no set order for the
>> registers, so I have not specified one.
>>
>> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
>> ---
>>
>> Changes in v10:
>> - New
>>
>> .../bindings/gpio/brcm,bcm6345-gpio.yaml | 16 +--
>> .../devicetree/bindings/gpio/gpio-mmio.yaml | 136 ++++++++++++++++++
>> .../bindings/gpio/ni,169445-nand-gpio.txt | 38 -----
>> .../devicetree/bindings/gpio/wd,mbl-gpio.txt | 38 -----
>> 4 files changed, 137 insertions(+), 91 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
>> delete mode 100644 Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
>> delete mode 100644 Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
>> index 4d69f79df859..e11f4af49c52 100644
>> --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
>> +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
>> @@ -4,7 +4,7 @@
>> $id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>
>> -title: Broadcom BCM6345 GPIO controller
>> +title: Broadcom BCM63xx GPIO controller
>>
>> maintainers:
>> - Álvaro Fernández Rojas <noltari@gmail.com>
>> @@ -18,8 +18,6 @@ description: |+
>>
>> BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
>> and/or written, and the direction changed from input to output.
>> - BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
>> - and/or written, and the direction changed from input to output.
>> BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
>> and dirout registers, where GPIO state can be read and/or written, and the
>> direction changed from input to output.
>> @@ -29,7 +27,6 @@ properties:
>> enum:
>> - brcm,bcm6318-gpio
>> - brcm,bcm6328-gpio
>> - - brcm,bcm6345-gpio
>> - brcm,bcm6358-gpio
>> - brcm,bcm6362-gpio
>> - brcm,bcm6368-gpio
>> @@ -63,17 +60,6 @@ required:
>> additionalProperties: false
>>
>> examples:
>> - - |
>> - gpio@fffe0406 {
>> - compatible = "brcm,bcm6345-gpio";
>> - reg-names = "dirout", "dat";
>> - reg = <0xfffe0406 2>, <0xfffe040a 2>;
>> - native-endian;
>> -
>> - gpio-controller;
>> - #gpio-cells = <2>;
>> - };
>> -
>> - |
>> gpio@0 {
>> compatible = "brcm,bcm63268-gpio";
>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
>> new file mode 100644
>> index 000000000000..fd5c7055d542
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
>> @@ -0,0 +1,136 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Generic MMIO GPIO
>> +
>> +maintainers:
>> + - Linus Walleij <linus.walleij@linaro.org>
>> + - Bartosz Golaszewski <brgl@bgdev.pl>
>> +
>> +description: |
>
> Don't need '|' unless you want line endings preserved. Elsewhere too.
OK
>> + Some simple GPIO controllers may consist of a single data register or a pair
>> + of set/clear-bit registers. Such controllers are common for glue logic in
>> + FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
>> + NAND-style parallel busses.
>> +
>> +properties:
>> + big-endian:
>> + true
>
> big-endian: true
OK
>> +
>> + compatible:
>> + enum:
>> + - brcm,bcm6345-gpio # Broadcom BCM6345 GPIO controller
>> + - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
>> + - ni,169445-nand-gpio # National Instruments 169445 GPIO NAND controller
>> +
>> + '#gpio-cells':
>> + const: 2
>> +
>> + gpio-controller:
>> + true
>
> ditto.
OK
--Sean
next prev parent reply other threads:[~2023-03-09 16:05 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-06 19:15 [PATCH v10 00/13] phy: Add support for Lynx 10G SerDes Sean Anderson
2023-03-06 19:15 ` [PATCH v10 01/13] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R Sean Anderson
2023-03-06 19:15 ` [PATCH v10 02/13] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2023-03-07 19:14 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 03/13] dt-bindings: Convert gpio-mmio to yaml Sean Anderson
2023-03-06 20:51 ` Jonas Gorski
2023-03-06 21:27 ` Sean Anderson
2023-03-10 10:33 ` Jonas Gorski
2023-03-06 22:04 ` Linus Walleij
2023-03-07 8:42 ` Krzysztof Kozlowski
2023-03-07 15:35 ` Sean Anderson
2023-03-08 8:48 ` Krzysztof Kozlowski
2023-03-09 9:16 ` Linus Walleij
2023-03-13 8:53 ` Leonard, Niall
2023-03-13 15:19 ` Sean Anderson
2023-03-13 22:13 ` Linus Walleij
2023-03-08 23:10 ` Rob Herring
2023-03-09 16:03 ` Sean Anderson [this message]
2023-03-06 19:15 ` [PATCH v10 04/13] dt-bindings: gpio-mmio: Add compatible for QIXIS Sean Anderson
2023-03-08 23:11 ` Rob Herring
2023-03-06 19:15 ` [PATCH v10 05/13] dt-bindings: clock: Add ids for Lynx 10g PLLs Sean Anderson
2023-03-06 19:15 ` [PATCH v10 06/13] clk: Add Lynx 10G SerDes PLL driver Sean Anderson
2023-03-06 19:15 ` [PATCH v10 07/13] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2023-03-06 19:15 ` [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape Sean Anderson
2023-03-06 19:15 ` [PATCH v10 09/13] arm64: dts: ls1046a: Add serdes nodes Sean Anderson
2023-03-06 19:15 ` [PATCH v10 10/13] arm64: dts: ls1046ardb: Add serdes descriptions Sean Anderson
2023-03-06 19:15 ` [PATCH v10 11/13] arm64: dts: ls1088a: Add serdes nodes Sean Anderson
2023-03-06 19:15 ` [PATCH v10 12/13] arm64: dts: ls1088a: Prevent PCSs from probing as phys Sean Anderson
2023-03-06 19:15 ` [PATCH v10 13/13] arm64: dts: ls1088ardb: Add serdes descriptions Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4fbd84ff-8a0c-669c-2f27-d542640ded24@seco.com \
--to=sean.anderson@seco.com \
--cc=bagasdotme@gmail.com \
--cc=brgl@bgdev.pl \
--cc=camelia.groza@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=jonas.gorski@gmail.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=noltari@gmail.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox