From: "tiejun.chen" <tiejun.chen@windriver.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [v3][PATCH 2/3] ppc/kprobe: complete kprobe and migrate exception frame
Date: Thu, 13 Sep 2012 18:36:57 +0800 [thread overview]
Message-ID: <5051B749.5040606@windriver.com> (raw)
In-Reply-To: <1347446296.2276.0.camel@pasglop>
On 09/12/2012 06:38 PM, Benjamin Herrenschmidt wrote:
> On Wed, 2012-09-12 at 16:55 +0800, tiejun.chen wrote:
>>> to worry about nor stack frame to create etc...
>>
>> If you don't like this v4, let me know and then I can go back memcpy
>> for next
>> version.
>
> Just open code the whole copy. It should be easy really. As I said, you
> have the src and dst already in registers and you know they are aligned,
> so just put the size of the frame in a register (divided by 4), do an
> mtctr and do a little load_update/store_update loop to do the copy, all
> in the asm.
Is the following Okay?
---
arch/powerpc/kernel/entry_32.S | 55 +++++++++++++++++++++++++++++++++++-----
arch/powerpc/kernel/entry_64.S | 45 ++++++++++++++++++++++++++++++++
2 files changed, 94 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index ead5016..3b56bba 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -32,6 +32,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <asm/ptrace.h>
+#include <asm/cache.h>
#undef SHOW_SYSCALLS
#undef SHOW_SYSCALLS_TASK
@@ -831,19 +832,63 @@ restore_user:
bnel- load_dbcr0
#endif
-#ifdef CONFIG_PREEMPT
b restore
/* N.B. the only way to get here is from the beq following ret_from_except. */
resume_kernel:
- /* check current_thread_info->preempt_count */
+ /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
CURRENT_THREAD_INFO(r9, r1)
+ lwz r8,TI_FLAGS(r9)
+ andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
+ beq+ 1f
+
+ addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
+
+ lwz r3,GPR1(r1)
+ subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
+ mr r4,r1 /* src: current exception frame */
+ li r5,INT_FRAME_SIZE /* size: INT_FRAME_SIZE */
+ li r6,0 /* start offset: 0 */
+ mr r1,r3 /* Reroute the trampoline frame to r1 */
+
+ /* Copy from the original to the trampoline. */
+ addi r5,r5,-4
+ addi r6,r6,-4
+4: li r0,L1_CACHE_BYTES/4
+ mtctr r0
+3: addi r6,r6,4 /* copy a cache line */
+ lwzx r0,r6,r4
+ stwx r0,r6,r3
+ bdnz 3b
+ dcbst r6,r3 /* write it to memory */
+ sync
+ cmplw 0,r6,r5
+ blt 4b
+
+ /* Do real store operation to complete stwu */
+ lwz r5,GPR1(r1)
+ stw r8,0(r5)
+
+ /* Clear _TIF_EMULATE_STACK_STORE flag */
+ lis r11,_TIF_EMULATE_STACK_STORE@h
+ addi r5,r9,TI_FLAGS
+0: lwarx r8,0,r5
+ andc r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+ dcbt 0,r5
+#endif
+ stwcx. r8,0,r5
+ bne- 0b
+1:
+
+#ifdef CONFIG_PREEMPT
+ /* check current_thread_info->preempt_count */
lwz r0,TI_PREEMPT(r9)
cmpwi 0,r0,0 /* if non-zero, just restore regs and return */
bne restore
- lwz r0,TI_FLAGS(r9)
- andi. r0,r0,_TIF_NEED_RESCHED
+ andi. r8,r8,_TIF_NEED_RESCHED
beq+ restore
+ lwz r3,_MSR(r1)
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
#ifdef CONFIG_TRACE_IRQFLAGS
@@ -864,8 +909,6 @@ resume_kernel:
*/
bl trace_hardirqs_on
#endif
-#else
-resume_kernel:
#endif /* CONFIG_PREEMPT */
/* interrupts are hard-disabled at this point */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index b40e0b4..cc43b64 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -593,6 +593,51 @@ _GLOBAL(ret_from_except_lite)
b .ret_from_except
resume_kernel:
+ /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+ CURRENT_THREAD_INFO(r9, r1)
+ ld r8,TI_FLAGS(r9)
+ andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
+ beq+ 1f
+
+ addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
+
+ lwz r3,GPR1(r1)
+ subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
+ mr r4,r1 /* src: current exception frame */
+ li r5,INT_FRAME_SIZE /* size: INT_FRAME_SIZE */
+ li r6,0 /* start offset: 0 */
+ mr r1,r3 /* Reroute the trampoline frame to r1 */
+
+ /* Copy from the original to the trampoline. */
+ addi r5,r5,-8
+ addi r6,r6,-8
+4: li r0,8
+ mtctr r0
+3: addi r6,r6,8 /* copy a cache line */
+ ldx r0,r6,r4
+ stdx r0,r6,r3
+ bdnz 3b
+ dcbst r6,r3 /* write it to memory */
+ sync
+ cmpld 0,r6,r5
+ blt 4b
+ sync
+
+ bl .copy_and_flush
+
+ /* Do real store operation to complete stwu */
+ lwz r5,GPR1(r1)
+ std r8,0(r5)
+
+ /* Clear _TIF_EMULATE_STACK_STORE flag */
+ lis r11,_TIF_EMULATE_STACK_STORE@h
+ addi r5,r9,TI_FLAGS
+ ldarx r4,0,r5
+ andc r4,r4,r11
+ stdcx. r4,0,r5
+ bne- 0b
+1:
+
#ifdef CONFIG_PREEMPT
/* Check if we need to preempt */
andi. r0,r4,_TIF_NEED_RESCHED
--
1.7.9.5
Tiejun
next prev parent reply other threads:[~2012-09-13 11:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-11 2:20 [v3][PATCH 1/3] powerpc/kprobe: introduce a new thread flag Tiejun Chen
2012-09-11 2:20 ` [v3][PATCH 2/3] ppc/kprobe: complete kprobe and migrate exception frame Tiejun Chen
2012-09-11 5:51 ` Benjamin Herrenschmidt
2012-09-12 8:38 ` tiejun.chen
2012-09-12 8:43 ` Benjamin Herrenschmidt
2012-09-12 8:55 ` tiejun.chen
2012-09-12 10:38 ` Benjamin Herrenschmidt
2012-09-13 10:36 ` tiejun.chen [this message]
2012-09-13 21:42 ` Benjamin Herrenschmidt
2012-09-11 2:20 ` [v3][PATCH 3/3] ppc/kprobe: don't emulate store when kprobe stwu r1 Tiejun Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5051B749.5040606@windriver.com \
--to=tiejun.chen@windriver.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).