From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: Julius Werner <jwerner@chromium.org>
Cc: Kevin Hilman <khilman@ti.com>,
Trinabh Gupta <g.trinabh@gmail.com>,
linux-pm@vger.kernel.org,
Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-kernel@vger.kernel.org, "Rafael J. Wysocki" <rjw@sisk.pl>,
linux-acpi@vger.kernel.org,
"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>,
Andrew Morton <akpm@linux-foundation.org>,
linuxppc-dev@lists.ozlabs.org, Sameer Nanda <snanda@chromium.org>,
Len Brown <lenb@kernel.org>
Subject: Re: [PATCH] cpuidle: Measure idle state durations with monotonic clock
Date: Wed, 14 Nov 2012 14:36:41 +0530 [thread overview]
Message-ID: <50A35F21.9040003@linux.vnet.ibm.com> (raw)
In-Reply-To: <1352843563-16392-1-git-send-email-jwerner@chromium.org>
On 11/14/2012 03:22 AM, Julius Werner wrote:
> Many cpuidle drivers measure their time spent in an idle state by
> reading the wallclock time before and after idling and calculating the
> difference. This leads to erroneous results when the wallclock time gets
> updated by another processor in the meantime, adding that clock
> adjustment to the idle state's time counter.
>
> If the clock adjustment was negative, the result is even worse due to an
> erroneous cast from int to unsigned long long of the last_residency
> variable. The negative 32 bit integer will zero-extend and result in a
> forward time jump of roughly four billion milliseconds or 1.3 hours on
> the idle state residency counter.
>
> This patch changes all affected cpuidle drivers to use the monotonic
> clock for their measurements instead. It also removes the erroneous
> cast, making sure that negative residency values are applied correctly
> even though they should not appear anymore.
Currently tegra/cpuidle uses ktime_get(). Good to have it for all
the other arch idle residency time logging too.
Tested patch on pseries.
Reviewed-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cheers,
Deepthi
>
> Signed-off-by: Julius Werner <jwerner@chromium.org>
> ---
> arch/powerpc/platforms/pseries/processor_idle.c | 4 ++--
> drivers/acpi/processor_idle.c | 12 ++++++------
> drivers/cpuidle/cpuidle.c | 3 +--
> drivers/idle/intel_idle.c | 13 ++++---------
> 4 files changed, 13 insertions(+), 19 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
> index 45d00e5..4d806b4 100644
> --- a/arch/powerpc/platforms/pseries/processor_idle.c
> +++ b/arch/powerpc/platforms/pseries/processor_idle.c
> @@ -36,7 +36,7 @@ static struct cpuidle_state *cpuidle_state_table;
> static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
> {
>
> - *kt_before = ktime_get_real();
> + *kt_before = ktime_get();
> *in_purr = mfspr(SPRN_PURR);
> /*
> * Indicate to the HV that we are idle. Now would be
> @@ -50,7 +50,7 @@ static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
> get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
> get_lppaca()->idle = 0;
>
> - return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
> + return ktime_to_us(ktime_sub(ktime_get(), kt_before));
> }
>
> static int snooze_loop(struct cpuidle_device *dev,
> diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
> index e8086c7..8c98d73 100644
> --- a/drivers/acpi/processor_idle.c
> +++ b/drivers/acpi/processor_idle.c
> @@ -751,9 +751,9 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
>
>
> lapic_timer_state_broadcast(pr, cx, 1);
> - kt1 = ktime_get_real();
> + kt1 = ktime_get();
> acpi_idle_do_entry(cx);
> - kt2 = ktime_get_real();
> + kt2 = ktime_get();
> idle_time = ktime_to_us(ktime_sub(kt2, kt1));
>
> /* Update device last_residency*/
> @@ -843,11 +843,11 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
> if (cx->type == ACPI_STATE_C3)
> ACPI_FLUSH_CPU_CACHE();
>
> - kt1 = ktime_get_real();
> + kt1 = ktime_get();
> /* Tell the scheduler that we are going deep-idle: */
> sched_clock_idle_sleep_event();
> acpi_idle_do_entry(cx);
> - kt2 = ktime_get_real();
> + kt2 = ktime_get();
> idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
> idle_time = idle_time_ns;
> do_div(idle_time, NSEC_PER_USEC);
> @@ -934,7 +934,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
> */
> lapic_timer_state_broadcast(pr, cx, 1);
>
> - kt1 = ktime_get_real();
> + kt1 = ktime_get();
> /*
> * disable bus master
> * bm_check implies we need ARB_DIS
> @@ -965,7 +965,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
> c3_cpu_count--;
> raw_spin_unlock(&c3_lock);
> }
> - kt2 = ktime_get_real();
> + kt2 = ktime_get();
> idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
> idle_time = idle_time_ns;
> do_div(idle_time, NSEC_PER_USEC);
> diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
> index 7f15b85..1536edd 100644
> --- a/drivers/cpuidle/cpuidle.c
> +++ b/drivers/cpuidle/cpuidle.c
> @@ -109,8 +109,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
> /* This can be moved to within driver enter routine
> * but that results in multiple copies of same code.
> */
> - dev->states_usage[entered_state].time +=
> - (unsigned long long)dev->last_residency;
> + dev->states_usage[entered_state].time += dev->last_residency;
> dev->states_usage[entered_state].usage++;
> } else {
> dev->last_residency = 0;
> diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
> index b0f6b4c..6329a97 100644
> --- a/drivers/idle/intel_idle.c
> +++ b/drivers/idle/intel_idle.c
> @@ -56,7 +56,7 @@
> #include <linux/kernel.h>
> #include <linux/cpuidle.h>
> #include <linux/clockchips.h>
> -#include <linux/hrtimer.h> /* ktime_get_real() */
> +#include <linux/hrtimer.h> /* ktime_get() */
> #include <trace/events/power.h>
> #include <linux/sched.h>
> #include <linux/notifier.h>
> @@ -281,8 +281,7 @@ static int intel_idle(struct cpuidle_device *dev,
> struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
> unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
> unsigned int cstate;
> - ktime_t kt_before, kt_after;
> - s64 usec_delta;
> + ktime_t kt_before;
> int cpu = smp_processor_id();
>
> cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
> @@ -297,7 +296,7 @@ static int intel_idle(struct cpuidle_device *dev,
> if (!(lapic_timer_reliable_states & (1 << (cstate))))
> clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
>
> - kt_before = ktime_get_real();
> + kt_before = ktime_get();
>
> stop_critical_timings();
> if (!need_resched()) {
> @@ -310,17 +309,13 @@ static int intel_idle(struct cpuidle_device *dev,
>
> start_critical_timings();
>
> - kt_after = ktime_get_real();
> - usec_delta = ktime_to_us(ktime_sub(kt_after, kt_before));
> + dev->last_residency = ktime_to_us(ktime_sub(ktime_get(), kt_before));
>
> local_irq_enable();
>
> if (!(lapic_timer_reliable_states & (1 << (cstate))))
> clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
>
> - /* Update cpuidle counters */
> - dev->last_residency = (int)usec_delta;
> -
> return index;
> }
>
next prev parent reply other threads:[~2012-11-14 9:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-13 21:52 [PATCH] cpuidle: Measure idle state durations with monotonic clock Julius Werner
2012-11-14 9:06 ` Deepthi Dharwar [this message]
2012-11-14 10:57 ` Daniel Lezcano
2012-11-14 11:05 ` Daniel Lezcano
2012-11-14 17:15 ` Julius Werner
2012-11-15 1:56 ` Julius Werner
2012-11-15 9:04 ` Preeti Murthy
2012-11-27 6:14 ` Len Brown
2012-11-15 10:52 ` Daniel Lezcano
2012-11-21 0:17 ` Rafael J. Wysocki
2012-11-27 6:15 ` Len Brown
2012-11-27 19:12 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50A35F21.9040003@linux.vnet.ibm.com \
--to=deepthi@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=daniel.lezcano@linaro.org \
--cc=g.trinabh@gmail.com \
--cc=jwerner@chromium.org \
--cc=khilman@ti.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=rjw@sisk.pl \
--cc=snanda@chromium.org \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).