linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "tiejun.chen" <tiejun.chen@windriver.com>
To: Bhushan Bharat-R65777 <R65777@freescale.com>
Cc: Caraman Mihai Claudiu-B02008 <B02008@freescale.com>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	Wood Scott-B07421 <B07421@freescale.com>,
	"agraf@suse.de" <agraf@suse.de>,
	"kvm-ppc@vger.kernel.org" <kvm-ppc@vger.kernel.org>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [RFC][KVM][PATCH 1/1] kvm:ppc:booke-64: soft-disable interrupts
Date: Thu, 9 May 2013 18:18:13 +0800	[thread overview]
Message-ID: <518B77E5.9020809@windriver.com> (raw)
In-Reply-To: <6A3DF150A5B70D4F9B66A25E3F7C888D0700E85D@039-SN2MPN1-011.039d.mgd.msft.net>

On 05/09/2013 06:00 PM, Bhushan Bharat-R65777 wrote:
>
>
>> -----Original Message-----
>> From: tiejun.chen [mailto:tiejun.chen@windriver.com]
>> Sent: Thursday, May 09, 2013 3:15 PM
>> To: Bhushan Bharat-R65777
>> Cc: Caraman Mihai Claudiu-B02008; Wood Scott-B07421; linuxppc-
>> dev@lists.ozlabs.org; agraf@suse.de; kvm-ppc@vger.kernel.org;
>> kvm@vger.kernel.org
>> Subject: Re: [RFC][KVM][PATCH 1/1] kvm:ppc:booke-64: soft-disable interrupts
>>
>> On 05/09/2013 04:23 PM, Bhushan Bharat-R65777 wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: Linuxppc-dev [mailto:linuxppc-dev-
>>>> bounces+bharat.bhushan=freescale.com@lists.ozlabs.org] On Behalf Of
>>>> bounces+Caraman
>>>> Mihai Claudiu-B02008
>>>> Sent: Wednesday, May 08, 2013 6:44 PM
>>>> To: Wood Scott-B07421; tiejun.chen
>>>> Cc: linuxppc-dev@lists.ozlabs.org; agraf@suse.de;
>>>> kvm-ppc@vger.kernel.org; kvm@vger.kernel.org
>>>> Subject: RE: [RFC][KVM][PATCH 1/1] kvm:ppc:booke-64: soft-disable
>>>> interrupts
>>>>
>>>>>> This only disable soft interrupt for kvmppc_restart_interrupt()
>>>>>> that restarts interrupts if they were meant for the host:
>>>>>>
>>>>>> a. SOFT_DISABLE_INTS() only for BOOKE_INTERRUPT_EXTERNAL |
>>>>>> BOOKE_INTERRUPT_DECREMENTER | BOOKE_INTERRUPT_DOORBELL
>>>>>
>>>>> Those aren't the only exceptions that can end up going to the host.
>>>>> We could get a TLB miss that results in a heavyweight MMIO exit, etc.
>>>>>
>>>>>> And shouldn't we handle kvmppc_restart_interrupt() like the
>>>>>> original HOST flow?
>>>>>>
>>>>>> #define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr,
>>>>>> ack)           \
>>>>>>
>>>>>> START_EXCEPTION(label);                                         \
>>>>>>           NORMAL_EXCEPTION_PROLOG(trapnum, intnum,
>>>>>> PROLOG_ADDITION_MASKABLE)\
>>>>>>           EXCEPTION_COMMON(trapnum, PACA_EXGEN,
>>>>>> *INTS_DISABLE*)             \
>>>>>> 	...
>>>>>
>>>>> Could you elaborate on what you mean?
>>>>
>>>> I think Tiejun was saying that host has flags and replays only
>>>> EE/DEC/DBELL interrupts. There is special macro
>>>> masked_interrupt_book3e in those exception handlers that sets paca-
>>> irq_happened.
>>>>
>>>> The list of replied interrupts is limited to asynchronous noncritical
>>>> interrupts which can be masked by MSR[EE] (therefore no TLB miss).
>>>> Now on KVM book3e we don't want to put them in the irq_happened lazy
>>>> state but rather to execute them directly, so there is no reason for
>>>> exception handling symmetry between host and guest.
>>>
>>>
>>> Another Question:
>>>
>>> The case is:
>>>
>>
>> Actually in the case GS=1 even if EE=0, EXT/DEC/DBELL still occur as I recall.
>>
>>> Case 1)
>>>    -> Local_irq_disable()  will set soft_enabled = 0
>>>    -> Now Externel interrupt happens, there we set PACA_IRQ_EE in irq_happened,
>> Also clears EE in SRR1 and rfi. So interrupts are hard disabled. No more other
>> interrupt gated by MSR.EE can happen. Looks like the idea here is to not let a
>> device keep on inserting interrupt till the interrupt condition on device is
>> cleared, right?
>>
>> I don't understand "the interrupt condition on device is cleared" here.
>>
>> I think regardless if you clear the device interrupt status, the system still
>> receive a pending interrupt once EE or GS = 1.
>
> Once yes, but I think to avoid flood of device interrupt we disable MSR.EE when soft-disabled.

But we neither ACK nor send EOI to that irq in the interrupt controller, so that 
should be in pending state.

>
>>
>>>    -> local_irq_enable() - This checks that irq_happened is set, and
>>> replays
>>
>> ret_from_except also check to replay.
>>
>>>
>>> Now the case 2)
>>> Case 2)
>>> -> Local_irq_disable()  will set soft_enabled = 0
>>>    -> Now DEC interrupt happens. We set PACA_IRQ_DEC in irq_happened, But do
>> not clear EE in SRR1 and rfi. So interrupts are not hard disabled.
>>>    -> Now say EE interrupt happens, there we set PACA_IRQ_EE in irq_happened,
>> Also clears EE in SRR1 and rfi. So interrupts are hard disabled.
>>>    -> local_irq_enable() - This checks that irq_happened is set.
>>> IIUC, it replays only one interrupt? is not it?
>>
>> After anyone is replayed in arch_local_irq_restore(), we will set soft/hard
>> interrupt there:
>>
>> set_soft_enabled(1);
>> __hard_irq_enable();
>>
>> Then any pending interrupt can be executed now.
>
> Do you mean that the interrupt should fire again?

I means the pending exception including external interrupt, the decrementer 
exception and the doorbell exception, can trap CPU once EE=1 with 
__hard_irq_enable() here. Then the kernel can handle those exception since soft 
enable is also 1 now.

>
>>
>> Additionally, ret_from_except probably check to replay all.
>
> Local_irq_enable() will not take us to ret_from_except.

Yes. I just say ret_from_except can provide an approach to replay all :)

Tiejun

  reply	other threads:[~2013-05-09 10:18 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-06  3:10 [RFC][KVM][PATCH 1/1] kvm:ppc:booke-64: soft-disable interrupts Tiejun Chen
2013-05-06  3:13 ` tiejun.chen
2013-05-06 23:50   ` Scott Wood
2013-05-07  1:56     ` tiejun.chen
2013-05-07  2:06       ` Scott Wood
2013-05-07  2:43         ` tiejun.chen
2013-05-07  3:04           ` Scott Wood
2013-05-08 13:14         ` Caraman Mihai Claudiu-B02008
2013-05-09  7:33           ` Bhushan Bharat-R65777
2013-05-09  7:47             ` tiejun.chen
2013-05-09  7:51               ` Bhushan Bharat-R65777
2013-05-09  8:04                 ` tiejun.chen
2013-05-09  8:08                 ` Kevin Hao
2013-05-09  8:12                   ` Bhushan Bharat-R65777
2013-05-09  8:17                     ` tiejun.chen
2013-05-09  8:26                       ` Bhushan Bharat-R65777
2013-05-09  8:21                     ` Kevin Hao
2013-05-09 12:26                       ` Benjamin Herrenschmidt
2013-05-09  8:23           ` Bhushan Bharat-R65777
2013-05-09  9:44             ` tiejun.chen
2013-05-09 10:00               ` Bhushan Bharat-R65777
2013-05-09 10:18                 ` tiejun.chen [this message]
2013-05-09 11:21                   ` Bhushan Bharat-R65777
2013-05-09 11:35                     ` tiejun.chen
2013-05-09 12:37               ` Benjamin Herrenschmidt
2013-05-09 13:28                 ` David Laight
2013-05-09 22:01                   ` Benjamin Herrenschmidt
2013-05-09 14:13                 ` Chen, Tiejun
2013-05-09 21:27                 ` Scott Wood
2013-05-09 22:07                   ` Benjamin Herrenschmidt
2013-05-09 22:13                     ` Scott Wood
2013-05-10 14:12                     ` Kevin Hao
2013-05-10 21:49                       ` Benjamin Herrenschmidt
2013-05-10 21:50                         ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518B77E5.9020809@windriver.com \
    --to=tiejun.chen@windriver.com \
    --cc=B02008@freescale.com \
    --cc=B07421@freescale.com \
    --cc=R65777@freescale.com \
    --cc=agraf@suse.de \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).