From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>,
benh@kernel.crashing.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Cc: preeti@linux.vnet.ibm.com, srivatsa.bhat@linux.vnet.ibm.com,
scottwood@freescale.com, linux-pm@lists.linux-foundation.org
Subject: Re: [PATCH V7 2/7] pseries/cpuidle: Use cpuidle_register() for initialisation.
Date: Wed, 06 Nov 2013 22:00:16 +0100 [thread overview]
Message-ID: <527AADE0.7050101@linaro.org> (raw)
In-Reply-To: <20131029110127.31547.9773.stgit@deepthi.in.ibm.com>
On 10/29/2013 12:01 PM, Deepthi Dharwar wrote:
> This patch replaces the cpuidle driver and devices initialisation
> calls with a single generic cpuidle_register() call
> and also includes minor refactoring of the code around it.
>
> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> drivers/cpuidle/cpuidle-ibm-power.c | 80 +++++------------------------------
> 1 file changed, 12 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
> index a166e38..faf8cc1 100644
> --- a/drivers/cpuidle/cpuidle-ibm-power.c
> +++ b/drivers/cpuidle/cpuidle-ibm-power.c
> @@ -1,5 +1,5 @@
> /*
> - * processor_idle - idle state cpuidle driver.
> + * cpuidle-ibm-power - idle state cpuidle driver.
> * Adapted from drivers/idle/intel_idle.c and
> * drivers/acpi/processor_idle.c
> *
> @@ -28,7 +28,6 @@ struct cpuidle_driver pseries_idle_driver = {
> #define MAX_IDLE_STATE_COUNT 2
>
> static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
> -static struct cpuidle_device __percpu *pseries_cpuidle_devices;
> static struct cpuidle_state *cpuidle_state_table;
>
> static inline void idle_loop_prolog(unsigned long *in_purr)
> @@ -56,13 +55,12 @@ static int snooze_loop(struct cpuidle_device *dev,
> int index)
> {
> unsigned long in_purr;
> - int cpu = dev->cpu;
>
> idle_loop_prolog(&in_purr);
> local_irq_enable();
> set_thread_flag(TIF_POLLING_NRFLAG);
>
> - while ((!need_resched()) && cpu_online(cpu)) {
> + while (!need_resched()) {
> ppc64_runlatch_off();
> HMT_low();
> HMT_very_low();
> @@ -191,7 +189,7 @@ static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n,
> {
> int hotcpu = (unsigned long)hcpu;
> struct cpuidle_device *dev =
> - per_cpu_ptr(pseries_cpuidle_devices, hotcpu);
> + per_cpu(cpuidle_devices, hotcpu);
>
> if (dev && cpuidle_get_driver()) {
> switch (action) {
> @@ -248,50 +246,6 @@ static int pseries_cpuidle_driver_init(void)
> return 0;
> }
>
> -/* pseries_idle_devices_uninit(void)
> - * unregister cpuidle devices and de-allocate memory
> - */
> -static void pseries_idle_devices_uninit(void)
> -{
> - int i;
> - struct cpuidle_device *dev;
> -
> - for_each_possible_cpu(i) {
> - dev = per_cpu_ptr(pseries_cpuidle_devices, i);
> - cpuidle_unregister_device(dev);
> - }
> -
> - free_percpu(pseries_cpuidle_devices);
> - return;
> -}
> -
> -/* pseries_idle_devices_init()
> - * allocate, initialize and register cpuidle device
> - */
> -static int pseries_idle_devices_init(void)
> -{
> - int i;
> - struct cpuidle_driver *drv = &pseries_idle_driver;
> - struct cpuidle_device *dev;
> -
> - pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
> - if (pseries_cpuidle_devices == NULL)
> - return -ENOMEM;
> -
> - for_each_possible_cpu(i) {
> - dev = per_cpu_ptr(pseries_cpuidle_devices, i);
> - dev->state_count = drv->state_count;
> - dev->cpu = i;
> - if (cpuidle_register_device(dev)) {
> - printk(KERN_DEBUG \
> - "cpuidle_register_device %d failed!\n", i);
> - return -EIO;
> - }
> - }
> -
> - return 0;
> -}
> -
> /*
> * pseries_idle_probe()
> * Choose state table for shared versus dedicated partition
> @@ -299,9 +253,6 @@ static int pseries_idle_devices_init(void)
> static int pseries_idle_probe(void)
> {
>
> - if (!firmware_has_feature(FW_FEATURE_SPLPAR))
> - return -ENODEV;
> -
> if (cpuidle_disable != IDLE_NO_OVERRIDE)
> return -ENODEV;
>
> @@ -310,10 +261,13 @@ static int pseries_idle_probe(void)
> return -EPERM;
> }
>
> - if (lppaca_shared_proc(get_lppaca()))
> - cpuidle_state_table = shared_states;
> - else
> - cpuidle_state_table = dedicated_states;
> + if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
> + if (lppaca_shared_proc(get_lppaca()))
> + cpuidle_state_table = shared_states;
> + else
> + cpuidle_state_table = dedicated_states;
> + } else
> + return -ENODEV;
>
> return 0;
> }
> @@ -327,22 +281,14 @@ static int __init pseries_processor_idle_init(void)
> return retval;
>
> pseries_cpuidle_driver_init();
> - retval = cpuidle_register_driver(&pseries_idle_driver);
> + retval = cpuidle_register(&pseries_idle_driver, NULL);
> if (retval) {
> printk(KERN_DEBUG "Registration of pseries driver failed.\n");
> return retval;
> }
>
> - retval = pseries_idle_devices_init();
> - if (retval) {
> - pseries_idle_devices_uninit();
> - cpuidle_unregister_driver(&pseries_idle_driver);
> - return retval;
> - }
> -
> register_cpu_notifier(&setup_hotplug_notifier);
> printk(KERN_DEBUG "pseries_idle_driver registered\n");
> -
> return 0;
> }
>
> @@ -350,9 +296,7 @@ static void __exit pseries_processor_idle_exit(void)
> {
>
> unregister_cpu_notifier(&setup_hotplug_notifier);
> - pseries_idle_devices_uninit();
> - cpuidle_unregister_driver(&pseries_idle_driver);
> -
> + cpuidle_unregister(&pseries_idle_driver);
> return;
> }
>
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2013-11-06 21:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 11:01 [PATCH V7 0/7] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms Deepthi Dharwar
2013-10-29 11:01 ` [PATCH V7 1/7] pseries/cpuidle: Move processor_idle.c to drivers/cpuidle Deepthi Dharwar
2013-11-06 20:58 ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 2/7] pseries/cpuidle: Use cpuidle_register() for initialisation Deepthi Dharwar
2013-11-06 21:00 ` Daniel Lezcano [this message]
2013-10-29 11:01 ` [PATCH V7 3/7] pseries/cpuidle: Make pseries_idle backend driver a non-module Deepthi Dharwar
2013-11-06 21:01 ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro Deepthi Dharwar
2013-11-06 21:02 ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 5/7] POWER/cpuidle: Generic POWER CPUIDLE driver supporting PSERIES Deepthi Dharwar
2013-11-06 21:05 ` Daniel Lezcano
2013-11-07 4:15 ` Deepthi Dharwar
2013-11-07 5:01 ` Benjamin Herrenschmidt
2013-11-07 5:27 ` Deepthi Dharwar
2013-10-29 11:01 ` [PATCH V7 6/7] POWER/cpuidle: Enable powernv cpuidle support Deepthi Dharwar
2013-11-06 21:06 ` Daniel Lezcano
2013-10-29 11:02 ` [PATCH V7 7/7] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar
2013-11-06 21:11 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=527AADE0.7050101@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=benh@kernel.crashing.org \
--cc=deepthi@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=preeti@linux.vnet.ibm.com \
--cc=scottwood@freescale.com \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).