Re: question about Linux 2.6 with Xilinx ML-403

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/7/06, yding <yding@lnxw.com> wrote:
>  HI, Grant,
>
>  I found this message :
> http://patchwork.ozlabs.org/linuxppc/patch?id=3D3841 on
> Internet.
>  It looks like you created some patch files for supporting Linux 2.6 with
> Xilinx ML-403.
>
> how can download the whole kernel source tree with your patched files (vi=
a
> cvs or bitkeeper) ?

I believe they are now in Linus' mainline git tree.  If not, they are
in Paul's powerpc git tree.

BTW, please CC the linuxppc-embedded mailing list when emailing me directly=
.

Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

Re: question about Linux 2.6 with Xilinx ML-403

[yding]

[-- Attachment #1: Type: text/plain, Size: 926 bytes --]

Hi, Grant,

Thanks for the information.

I just checked out Linus's GIT tree from
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
linux-2.6.

Where is the location for Paul's GIT tree ? Just curious ...

Best Regards,
--
Ying Ding


Grant Likely wrote:

>On 4/7/06, yding <yding@lnxw.com> wrote:
>  
>
>> HI, Grant,
>>
>> I found this message :
>>http://patchwork.ozlabs.org/linuxppc/patch?id=3841 on
>>Internet.
>> It looks like you created some patch files for supporting Linux 2.6 with
>>Xilinx ML-403.
>>
>>how can download the whole kernel source tree with your patched files (via
>>cvs or bitkeeper) ?
>>    
>>
>
>I believe they are now in Linus' mainline git tree.  If not, they are
>in Paul's powerpc git tree.
>
>BTW, please CC the linuxppc-embedded mailing list when emailing me directly.
>
>Cheers,
>g.
>--
>Grant Likely, B.Sc. P.Eng.
>Secret Lab Technologies Ltd.
>(403) 399-0195
>
>  
>

[-- Attachment #2: Type: text/html, Size: 1559 bytes --]

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/11/06, yding <yding@lnxw.com> wrote:
>  I just checked out Linus's GIT tree from
> rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> linux-2.6.
>
>  Where is the location for Paul's GIT tree ? Just curious ...

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

RE: question about Linux 2.6 with Xilinx ML-403

[Martin, Tim]

Grant,

I know I could probably figure this out by looking at the GIT tree
directly (which I'm planning to do) but could you summarize how much
(which devices) of the ML-403 is supported by your patches?

Serial? (which Xilinx core)

Ethernet? (Hard-Core PLB TEMAC?, Soft-Core PLB EMAC? Localink TEMAC? Is
10/100/1000 supported, or is there only 1 rate e.g. 1000 supported?)

Anything else (GPIO buttons/switches?)

Thanks,
Tim

-----Original Message-----
From: linuxppc-embedded-bounces+tmartin=3Dviasat.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+tmartin=3Dviasat.com@ozlabs.org] On
Behalf Of Grant Likely
Sent: Tuesday, April 11, 2006 9:05 PM
To: yding
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: question about Linux 2.6 with Xilinx ML-403

On 4/11/06, yding <yding@lnxw.com> wrote:
>  I just checked out Linus's GIT tree from
>
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> linux-2.6.
>
>  Where is the location for Paul's GIT tree ? Just curious ...

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: question about Linux 2.6 with Xilinx ML-403

[yding]

[-- Attachment #1: Type: text/plain, Size: 766 bytes --]

HI, Grant,

I downloaded Paul's git tree as you suggested.

It seems that the defconfig for ML-403(in Patch [9/9]:
http://patchwork.ozlabs.org/linuxppc/patch?id=4226 ), the tri-mode
Ethernet MAC on Virtex-4 FX12 on the ML-403 board was disabled.

Is this Ethernet device supported by this patch ?

Thanks.
--
Ying Ding


Grant Likely wrote:

>On 4/11/06, yding <yding@lnxw.com> wrote:
>  
>
>> I just checked out Linus's GIT tree from
>>rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>>linux-2.6.
>>
>> Where is the location for Paul's GIT tree ? Just curious ...
>>    
>>
>
>rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git
>
>g.
>
>--
>Grant Likely, B.Sc. P.Eng.
>Secret Lab Technologies Ltd.
>(403) 399-0195
>
>  
>

[-- Attachment #2: Type: text/html, Size: 1392 bytes --]

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/12/06, Martin, Tim <tim.martin@viasat.com> wrote:
> Grant,
>
> I know I could probably figure this out by looking at the GIT tree
> directly (which I'm planning to do) but could you summarize how much
> (which devices) of the ML-403 is supported by your patches?
>
> Serial? (which Xilinx core)
Yes, full uart

>
> Ethernet? (Hard-Core PLB TEMAC?, Soft-Core PLB EMAC? Localink TEMAC? Is
> 10/100/1000 supported, or is there only 1 rate e.g. 1000 supported?)

No.  I've ported the 2.4 driver, but I haven't got permission to
release it yet.  (I'm a contractor; I don't own any of the work I do)

>
> Anything else (GPIO buttons/switches?)
I've got drivers for the PS/2 & VGA, but I'm still trying to get them relea=
sed.

Cheers,
g.

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/12/06, yding <yding@lnxw.com> wrote:
>  Is this Ethernet device supported by this patch ?

No, sorry.  I'm still trying to get permission to release it (it's
internal only at the moment)

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

RE: question about Linux 2.6 with Xilinx ML-403

[Martin, Tim]

> >
> > Ethernet? (Hard-Core PLB TEMAC?, Soft-Core PLB EMAC? Localink TEMAC?
Is
> > 10/100/1000 supported, or is there only 1 rate e.g. 1000 supported?)
>=20
> No.  I've ported the 2.4 driver, but I haven't got permission to
> release it yet.  (I'm a contractor; I don't own any of the work I do)
>=20

Which 2.4 driver - there's the "Montavista" one for the softcore PLB
EMAC, and there's also one for the hardcore PLB TEMAC that gets
distributed with the GSRD.

Thanks,
Tim

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/12/06, Martin, Tim <tim.martin@viasat.com> wrote:
>
> Which 2.4 driver - there's the "Montavista" one for the softcore PLB
> EMAC, and there's also one for the hardcore PLB TEMAC that gets
> distributed with the GSRD.

The montavista softcore driver.  Has someone written a driver for the TEMAC=
 yet?

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

RE: question about Linux 2.6 with Xilinx ML-403

[Rick Moleres]

Yes, we have a driver for the PLB TEMAC (different than the GSRD LL
TEMAC) for Linux 2.4 (MontaVista Linux 2.4.20) that's shipped in EDK
8.1.1, and MontaVista is on the verge of publishing a driver for PLB
TEMAC for Linux 2.6. (I believe it came across this mailing list a few
weeks ago)

-Rick

-----Original Message-----
From: linuxppc-embedded-bounces+moleres=3Dxilinx.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+moleres=3Dxilinx.com@ozlabs.org] On
Behalf Of Grant Likely
Sent: Wednesday, April 12, 2006 3:25 PM
To: Martin, Tim
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: question about Linux 2.6 with Xilinx ML-403

On 4/12/06, Martin, Tim <tim.martin@viasat.com> wrote:
>
> Which 2.4 driver - there's the "Montavista" one for the softcore PLB
> EMAC, and there's also one for the hardcore PLB TEMAC that gets
> distributed with the GSRD.

The montavista softcore driver.  Has someone written a driver for the
TEMAC yet?

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 4/12/06, Rick Moleres <rick.moleres@xilinx.com> wrote:
>
> Yes, we have a driver for the PLB TEMAC (different than the GSRD LL
> TEMAC) for Linux 2.4 (MontaVista Linux 2.4.20) that's shipped in EDK
> 8.1.1, and MontaVista is on the verge of publishing a driver for PLB
> TEMAC for Linux 2.6. (I believe it came across this mailing list a few
> weeks ago)

Hey cool!  Yeah I just found it now.  I haven't been following the
list very closely the last month or so.  I'll try it out in short
order.

Thanks Rick!

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

RE: question about Linux 2.6 with Xilinx ML-403

[Chang Sun]

Grant,=20
I checked both Torvalds' tree and Paul's tree. I see the defconfig file
for both ml300 and ml403, but I don't see any source files related to
either ml300 or ml403 under the <platforms> subdirectory. Have you done
a complete BSP for either ml300 or ml403?

Thanks,=20
Chang

-----Original Message-----
From: linuxppc-embedded-bounces+chang.sun=3Dxilinx.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+chang.sun=3Dxilinx.com@ozlabs.org] On
Behalf Of Grant Likely
Sent: Wednesday, April 12, 2006 11:45 AM
To: Martin, Tim
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: question about Linux 2.6 with Xilinx ML-403

On 4/12/06, Martin, Tim <tim.martin@viasat.com> wrote:
> Grant,
>
> I know I could probably figure this out by looking at the GIT tree
> directly (which I'm planning to do) but could you summarize how much
> (which devices) of the ML-403 is supported by your patches?
>
> Serial? (which Xilinx core)
Yes, full uart

>
> Ethernet? (Hard-Core PLB TEMAC?, Soft-Core PLB EMAC? Localink TEMAC?
Is
> 10/100/1000 supported, or is there only 1 rate e.g. 1000 supported?)

No.  I've ported the 2.4 driver, but I haven't got permission to
release it yet.  (I'm a contractor; I don't own any of the work I do)

>
> Anything else (GPIO buttons/switches?)
I've got drivers for the PS/2 & VGA, but I'm still trying to get them
released.

Cheers,
g.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: question about Linux 2.6 with Xilinx ML-403

[Andrei Konovalov]

Chang Sun wrote:
> Grant, 
> I checked both Torvalds' tree and Paul's tree. I see the defconfig file
> for both ml300 and ml403, but I don't see any source files related to
> either ml300 or ml403 under the <platforms> subdirectory. Have you done
> a complete BSP for either ml300 or ml403?
> 
> Thanks, 
> Chang

arch/ppc/platforms/4xx/virtex.c
arch/ppc/platforms/4xx/virtex.h
arch/ppc/platforms/4xx/xilinx_ml300.c
arch/ppc/platforms/4xx/xilinx_ml300.h
arch/ppc/platforms/4xx/xilinx_ml403.c
arch/ppc/platforms/4xx/xilinx_ml403.h

These are in the both trees you've mentioned.

Regards,
Andrei

Re: question about Linux 2.6 with Xilinx ML-403

[yding]

[-- Attachment #1: Type: text/plain, Size: 1431 bytes --]

HI, Grant,

It looks like that the patch for ML-403 in Linux 2.6.17 kernel(I
downloaded from Linus git tree) does not have the directory :
./arch/ppc/platform/4xx/xilinx_ocp like the one in the 2.4.30 kernel.

And also, I saw this thread: "Migrate Xilinx Vertex support from the OCP
bus to the platfom bus"

    http://patchwork.ozlabs.org/linuxppc/patch?id=3933

Does it mean all of onchip peripherals for Virtex-4 FX must reside on
the PLB bus instead of OPB (OCB) bus ?
(i.e. during the process of creating the ref design for Linux using
Xilinx Platform studio, I have to select PLB peripherals instead of OPB
peripherals. Is is correct ?)

BTW, do you have a sample ref design for ML-403 board for Xilinx
Platform studio ?

Thanks for the help.
--
Ying Ding

Grant Likely wrote:

>On 4/7/06, yding <yding@lnxw.com> wrote:
>  
>
>> HI, Grant,
>>
>> I found this message :
>>http://patchwork.ozlabs.org/linuxppc/patch?id=3841 on
>>Internet.
>> It looks like you created some patch files for supporting Linux 2.6 with
>>Xilinx ML-403.
>>
>>how can download the whole kernel source tree with your patched files (via
>>cvs or bitkeeper) ?
>>    
>>
>
>I believe they are now in Linus' mainline git tree.  If not, they are
>in Paul's powerpc git tree.
>
>BTW, please CC the linuxppc-embedded mailing list when emailing me directly.
>
>Cheers,
>g.
>--
>Grant Likely, B.Sc. P.Eng.
>Secret Lab Technologies Ltd.
>(403) 399-0195
>
>  
>

[-- Attachment #2: Type: text/html, Size: 2165 bytes --]

Re: question about Linux 2.6 with Xilinx ML-403

[Grant Likely]

On 5/1/06, yding <yding@lnxw.com> wrote:
>  HI, Grant,
>
>  It looks like that the patch for ML-403 in Linux 2.6.17 kernel(I downloa=
ded
> from Linus git tree) does not have the directory :
> ./arch/ppc/platform/4xx/xilinx_ocp like the one in the
> 2.4.30 kernel.

That's right.  AFAIK, The 2.6 kernel is not yet supported by the
Xilinx EDK tools; and so it cannot generate a 2.6 BSP.  If you want to
use the generated BSP; use the montavista 2.4 kernel.

>  And also, I saw this thread: "Migrate Xilinx Vertex support from the OCP
> bus to the platfom bus"
>
> http://patchwork.ozlabs.org/linuxppc/patch?id=3D3933
>  Does it mean all of onchip peripherals for Virtex-4 FX must reside on th=
e
> PLB bus instead of OPB (OCB) bus ?

No.  Platform bus is a Linux construct to make it simpler to handle
"directly attached" devices.  ie. Anything that the processor can
access directly w/o PCI et all.  OPB and PLB devices are both
'platform' devices in Linux 2.6 terminology.

>  (i.e. during the process of creating the ref design for Linux using Xili=
nx
> Platform studio, I have to select PLB peripherals instead of OPB
> peripherals. Is is correct ?)

No, use whatever peripherals you want (either PLB, or OPB).  Just be
prepared to port device drivers for anything beyond a serial port.

>
>  BTW, do you have a sample ref design for ML-403 board for Xilinx Platfor=
m
> studio ?

Why not use the ref design that Xilinx provides?  (I have a number of
designs that work; but most of the time I use the ML403 ref design
because I know it's proven)

Cheers,
g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195