From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.171]) by ozlabs.org (Postfix) with ESMTP id E411FDDE26 for ; Thu, 18 Jan 2007 17:20:15 +1100 (EST) Received: by ug-out-1314.google.com with SMTP id k3so93395ugf for ; Wed, 17 Jan 2007 22:20:13 -0800 (PST) Message-ID: <528646bc0701172220l7ce35a1cl2d8829b550cedd57@mail.gmail.com> Date: Wed, 17 Jan 2007 23:20:13 -0700 From: "Grant Likely" Sender: glikely@gmail.com To: "Bruce_Leonard@selinc.com" Subject: Re: Who's the maintainer for the freescale MPC8349ITX board? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed References: <71718296-E8FC-48B0-9A8E-F2F54373C94E@kernel.crashing.org> Cc: linuxppc-embedded-bounces+brucle=selinc.com@ozlabs.org, linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 1/17/07, Bruce_Leonard@selinc.com wrote: > I'm trying to bring up the > 2.6.19.1 kernel using u-boot 1.1.6 on the MPC8349ITX board and I'm having > problems with the open firmware part of it (which I am TOTALLY new to). > Short version, I don't think the *.dts file for this board is correct and > I'm wondering if anyone might have a newer version or good documentation > as to the formatting of the *.dts files? There is some device tree documentation in the kernel tree: Documentation/powerpc/booting-without-of.txt Also, make sure you're either using the latest dtc; If not, then you need to use the '-V 0x10' switch to get the correct tree format. g. -- Grant Likely, B.Sc. P.Eng. Secret Lab Technologies Ltd. grant.likely@secretlab.ca (403) 399-0195