linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Preeti U Murthy <preeti@linux.vnet.ibm.com>
To: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org, srivatsa.bhat@linux.vnet.ibm.com
Subject: Re: [PATCH v2 6/6] powernv:cpufreq: Implement the driver->get() method
Date: Mon, 17 Mar 2014 14:41:10 +0530	[thread overview]
Message-ID: <5326BC2E.7060503@linux.vnet.ibm.com> (raw)
In-Reply-To: <1394449861-8688-7-git-send-email-ego@linux.vnet.ibm.com>

On 03/10/2014 04:41 PM, Gautham R. Shenoy wrote:
> From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
> 
> The current frequency of a cpu is reported through the sysfs file
> cpuinfo_cur_freq. This requires the driver to implement a
> "->get(unsigned int cpu)" method which will return the current
> operating frequency.
> 
> Implement a function named powernv_cpufreq_get() which reads the local
> pstate from the PMSR and returns the corresponding frequency.
> 
> Set the powernv_cpufreq_driver.get hook to powernv_cpufreq_get().
> 
> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> ---
>  drivers/cpufreq/powernv-cpufreq.c | 48 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
> index 183bbc4..6f3b6e1 100644
> --- a/drivers/cpufreq/powernv-cpufreq.c
> +++ b/drivers/cpufreq/powernv-cpufreq.c
> @@ -223,6 +223,53 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val)
>  	BUG();
>  }
>  
> +/*
> + * Computes the current frequency on this cpu
> + * and stores the result in *ret_freq.
> + */
> +static void powernv_read_cpu_freq(void *ret_freq)
> +{
> +	unsigned long pmspr_val;
> +	s8 local_pstate_id;
> +	int *cur_freq, freq, pstate_id;
> +
> +	cur_freq = (int *)ret_freq;
> +	pmspr_val = get_pmspr(SPRN_PMSR);
> +
> +	/* The local pstate id corresponds bits 48..55 in the PMSR.
> +         * Note: Watch out for the sign! */
> +	local_pstate_id = (pmspr_val >> 48) & 0xFF;
> +	pstate_id = local_pstate_id;
> +
> +	freq = pstate_id_to_freq(pstate_id);
> +	pr_debug("cpu %d pmsr %lx pstate_id %d frequency %d \n",
> +		smp_processor_id(), pmspr_val, pstate_id, freq);
> +	*cur_freq = freq;
> +}
> +
> +/*
> + * Returns the cpu frequency as reported by the firmware for 'cpu'.
> + * This value is reported through the sysfs file cpuinfo_cur_freq.
> + */
> +unsigned int powernv_cpufreq_get(unsigned int cpu)
> +{
> +	int ret_freq;
> +	cpumask_var_t sibling_mask;
> +
> +	if (unlikely(!zalloc_cpumask_var(&sibling_mask, GFP_KERNEL))) {
> +		smp_call_function_single(cpu, powernv_read_cpu_freq,
> +					&ret_freq, 1);
> +		return ret_freq;
> +	}
> +
> +	powernv_cpu_to_core_mask(cpu, sibling_mask);
> +	smp_call_function_any(sibling_mask, powernv_read_cpu_freq,
> +			&ret_freq, 1);
> +
> +	free_cpumask_var(sibling_mask);
> +	return ret_freq;
> +}
> +
>  static void set_pstate(void *pstate)
>  {
>  	unsigned long val;
> @@ -309,6 +356,7 @@ static int powernv_cpufreq_target(struct cpufreq_policy *policy,
>  static struct cpufreq_driver powernv_cpufreq_driver = {
>  	.verify		= powernv_cpufreq_verify,
>  	.target		= powernv_cpufreq_target,
> +	.get		= powernv_cpufreq_get,
>  	.init		= powernv_cpufreq_cpu_init,
>  	.exit		= powernv_cpufreq_cpu_exit,
>  	.name		= "powernv-cpufreq",
> 
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>

      reply	other threads:[~2014-03-17  9:15 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-10 11:10 [PATCH v2 0/6] powernv:cpufreq: Dynamic cpu-frequency scaling Gautham R. Shenoy
2014-03-10 11:10 ` [PATCH v2 1/6] powernv: cpufreq driver for powernv platform Gautham R. Shenoy
2014-03-10 11:10 ` [PATCH v2 2/6] powernv:cpufreq: Create a powernv_cpu_to_core_mask() helper Gautham R. Shenoy
2014-03-18 23:37   ` Benjamin Herrenschmidt
2014-03-19  6:35     ` Srivatsa S. Bhat
2014-03-19 11:02       ` Gautham R Shenoy
2014-03-10 11:10 ` [PATCH v2 3/6] powernv, cpufreq:Add per-core locking to serialize frequency transitions Gautham R. Shenoy
2014-03-17  9:04   ` Preeti U Murthy
2014-03-10 11:10 ` [PATCH v2 4/6] powernv:cpufreq: Create pstate_id_to_freq() helper Gautham R. Shenoy
2014-03-17  9:06   ` Preeti U Murthy
2014-03-10 11:11 ` [PATCH v2 5/6] powernv:cpufreq: Export nominal frequency via sysfs Gautham R. Shenoy
2014-03-10 11:11 ` [PATCH v2 6/6] powernv:cpufreq: Implement the driver->get() method Gautham R. Shenoy
2014-03-17  9:11   ` Preeti U Murthy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5326BC2E.7060503@linux.vnet.ibm.com \
    --to=preeti@linux.vnet.ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=srivatsa.bhat@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).