From: Joachim Meyer <Jogi95@web.de>
To: linuxppc-embedded@ozlabs.org
Subject: ml310 kernel2.6 booting problems
Date: Wed, 16 Jan 2008 14:25:53 +0100 [thread overview]
Message-ID: <537566320@web.de> (raw)
Hi
I made an Ace file with my Kernel and load it with the Flash Card.
I made the Initial release CF image on the card and copied my ace file in an folder, from which I boot with the DIP-Switch.
If I used
"console=ttyUL0 ,9600 root=/dev/xsysace/disc0/part2 rw "
in the Kernel config booting aborts like this:
----------------------------------------------------------------------------------------------------------------
....
[ 5.715168] 000001c0: 00000000 00000000 00000000 00000000 ................
[ 5.797484] 000001d0: 00000000 00000000 00000000 00000000 ................
[ 5.879741] 000001e0: 00000000 00000000 00000000 00000000 ................
[ 5.962057] 000001f0: 00000000 00000000 00000000 00000000 ................
[ 6.044365] xsysace xsysace.0: capacity: 1000944 sectors
[ 6.109986] xsa:<7>xsysace xsysace.0: fsm_state=0, id_req_count=0
[ 6.207902] xsa1 xsa2
[ 6.226842] Xilinx SystemACE device driver, major=254
[ 6.281419] tun: Universal TUN/TAP device driver, 1.6
[ 6.341706] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.419485] mice: PS/2 mouse device common for all mice
[ 6.478716] TCP cubic registered
[ 6.516974] NET: Registered protocol family 1
[ 6.568940] NET: Registered protocol family 17
[ 6.627483] VFS: Cannot open root device "xsysace/disc0/part2" or unknown-block(0,0)
[ 6.714743] Please append a correct "root=" boot option; here are the available partitions:
[ 6.814732] fe00 500472 xsa (driver?)
[ 6.862193] fe01 98248 xsa1
[ 6.902974] fe02 402192 xsa2
[ 6.943603] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 7.042832] Rebooting in 180 seconds..
------------------------------------------------------------------------------------------------------------------------------------
I tried to use this:
"console=ttyUL0 ,9600 root=fe02 rw"
and with this, after making ace-file etc. I get:
-------------------------------------------------------------------------------------------------------
...
[ 5.447429] 00000190: 00000000 00000000 00000000 00000000 ................
[ 5.529734] 000001a0: 00000000 00000000 00000000 00000000 ................
[ 5.612002] 000001b0: 00000000 00000000 00000000 00000000 ................
[ 5.694288] 000001c0: 00000000 00000000 00000000 00000000 ................
[ 5.776594] 000001d0: 00000000 00000000 00000000 00000000 ................
[ 5.858861] 000001e0: 00000000 00000000 00000000 00000000 ................
[ 5.941167] 000001f0: 00000000 00000000 00000000 00000000 ................
[ 6.023453] xsysace xsysace.0: capacity: 1000944 sectors
[ 6.090042] xsa:<7>xsysace xsysace.0: fsm_state=0, id_req_count=0
[ 6.186832] xsa1 xsa2
[ 6.205880] Xilinx SystemACE device driver, major=254
[ 6.260331] tun: Universal TUN/TAP device driver, 1.6
[ 6.320626] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.398443] mice: PS/2 mouse device common for all mice
[ 6.457695] TCP cubic registered
[ 6.495755] NET: Registered protocol family 1
[ 6.547840] NET: Registered protocol family 17
[ 12.726608] kjournald starting. Commit interval 5 seconds
[ 12.862678] EXT3 FS on xsa2, internal journal
[ 12.899229] EXT3-fs: recovery complete.
[ 12.982635] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.038505] VFS: Mounted root (ext3 filesystem).
[ 13.094113] Freeing unused kernel memory: 96k init
[ 13.159079] Warning: unable to open an initial console.
-------------------------------------------------------------------------------------------------
what is the Problem here?
What should I consider when I configure the kernel, what when building an rootfs?
Greetings
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
next reply other threads:[~2008-01-16 13:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-16 13:25 Joachim Meyer [this message]
2008-01-16 14:50 ` ml310 kernel2.6 booting problems Grant Likely
2008-01-25 13:04 ` greenlean
2008-01-25 15:17 ` Grant Likely
-- strict thread matches above, loose matches on Subject: below --
2008-01-16 20:02 Joachim Meyer
2008-01-16 20:30 ` Grant Likely
2008-01-17 20:19 Joachim Meyer
2008-01-18 2:49 Jean-Samuel Chenard
2008-01-19 0:11 ` Ron Sass
2008-01-19 0:35 ` Stephen Neuendorffer
2008-01-19 1:21 ` Ron Sass
2008-01-19 1:23 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537566320@web.de \
--to=jogi95@web.de \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).