From: Nathan Fontenot <nfont@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 3/5] pseries: Create device hotplug entry point
Date: Mon, 15 Sep 2014 15:31:51 -0500 [thread overview]
Message-ID: <54174CB7.2080704@linux.vnet.ibm.com> (raw)
In-Reply-To: <54174B81.50504@linux.vnet.ibm.com>
For pseries system the kernel will be notified of hotplug requests in
the form of rtas hotplug events. This patch creates a common routine that
can handle these requests in both the PowerVM anbd PowerKVM environments,
handle_dlpar_errorlog(). This also creates the initial memory hotplug
request handling stub.
For PowerVM this patch also creates a new /proc file that the drmgr
command will use to write rtas hotplug events to.
For future PowerKVM handling the rtas check-exception code can pass
any rtas hotplug events received to handle_dlpar_errorlog().
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/dlpar.c | 63 +++++++++++++++++++++++
arch/powerpc/platforms/pseries/hotplug-memory.c | 22 ++++++++
arch/powerpc/platforms/pseries/pseries.h | 10 ++++
3 files changed, 94 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a2450b8..574ec73 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -16,7 +16,9 @@
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/proc_fs.h>
#include "offline_states.h"
+#include "pseries.h"
#include <asm/prom.h>
#include <asm/machdep.h>
@@ -530,13 +532,72 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count)
return count;
}
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
+static int handle_dlpar_errorlog(struct rtas_error_log *error_log)
+{
+ struct pseries_errorlog *pseries_log;
+ struct pseries_hp_errorlog *hp_elog;
+ int rc = -EINVAL;
+
+ pseries_log = get_pseries_errorlog(error_log,
+ PSERIES_ELOG_SECT_ID_HOTPLUG);
+ if (!pseries_log)
+ return rc;
+
+ hp_elog = (struct pseries_hp_errorlog *)pseries_log->data;
+ if (!hp_elog)
+ return rc;
+
+ switch (hp_elog->resource) {
+ case PSERIES_HP_ELOG_RESOURCE_MEM:
+ rc = dlpar_memory(hp_elog);
+ break;
+ }
+
+ return rc;
+}
+
+static ssize_t dlpar_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *offset)
+{
+ char *event_buf;
+ int rc;
+
+ event_buf = kmalloc(count + 1, GFP_KERNEL);
+ if (!event_buf)
+ return -ENOMEM;
+
+ rc = copy_from_user(event_buf, buf, count);
+ if (rc) {
+ kfree(event_buf);
+ return rc;
+ }
+
+ rc = handle_dlpar_errorlog((struct rtas_error_log *)event_buf);
+ kfree(event_buf);
+ return rc ? rc : count;
+}
+
+static const struct file_operations dlpar_fops = {
+ .write = dlpar_write,
+ .llseek = noop_llseek,
+};
+
static int __init pseries_dlpar_init(void)
{
+ struct proc_dir_entry *proc_ent;
+
+ proc_ent = proc_create("powerpc/dlpar", S_IWUSR, NULL, &dlpar_fops);
+ if (proc_ent)
+ proc_set_size(proc_ent, 0);
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
ppc_md.cpu_probe = dlpar_cpu_probe;
ppc_md.cpu_release = dlpar_cpu_release;
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
return 0;
}
machine_device_initcall(pseries, pseries_dlpar_init);
-#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 24abc5c..0e60e15 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -9,6 +9,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "pseries-hotplug: " fmt
+
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/memblock.h>
@@ -20,6 +22,9 @@
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/sparsemem.h>
+#include <asm/rtas.h>
+
+DEFINE_MUTEX(dlpar_mem_mutex);
unsigned long pseries_memory_block_size(void)
{
@@ -150,6 +155,23 @@ static inline int pseries_remove_mem_node(struct device_node *np)
}
#endif /* CONFIG_MEMORY_HOTREMOVE */
+int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
+{
+ int rc = 0;
+
+ mutex_lock(&dlpar_mem_mutex);
+
+ switch (hp_elog->action) {
+ default:
+ pr_err("Invalid action (%d) specified\n", hp_elog->action);
+ rc = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&dlpar_mem_mutex);
+ return rc;
+}
+
static int pseries_add_mem_node(struct device_node *np)
{
const char *type;
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index b94516b..28bd994 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -11,6 +11,7 @@
#define _PSERIES_PSERIES_H
#include <linux/interrupt.h>
+#include <asm/rtas.h>
struct device_node;
@@ -62,6 +63,15 @@ extern int dlpar_detach_node(struct device_node *);
extern int dlpar_acquire_drc(u32);
extern int dlpar_release_drc(u32);
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern int dlpar_memory(struct pseries_hp_errorlog *);
+#else
+static inline int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
+{
+ return -ENOTSUPP;
+}
+#endif
+
/* PCI root bridge prepare function override for pseries */
struct pci_host_bridge;
int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
next prev parent reply other threads:[~2014-09-15 20:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-15 20:26 [PATCH 0/5] pseries: Move memory hotplug to the kernel Nathan Fontenot
2014-09-15 20:29 ` [PATCH 1/5] pseries: Define rtas hotplug event sections Nathan Fontenot
2014-09-17 7:06 ` [1/5] " Michael Ellerman
2014-09-17 16:49 ` Nathan Fontenot
2014-09-15 20:30 ` [PATCH 2/5] pseries: Export drc_[acquire|release]_drc() routines Nathan Fontenot
2014-09-17 7:07 ` [2/5] " Michael Ellerman
2014-09-17 16:50 ` Nathan Fontenot
2014-09-15 20:31 ` Nathan Fontenot [this message]
2014-09-17 7:07 ` [3/5] pseries: Create device hotplug entry point Michael Ellerman
2014-09-17 19:15 ` Nathan Fontenot
2014-09-23 1:15 ` Tyrel Datwyler
2014-09-23 14:43 ` Nathan Fontenot
2014-09-15 20:32 ` [PATCH 4/5] pseries: Implement memory hotplug add in the kernel Nathan Fontenot
2014-09-17 7:07 ` [4/5] " Michael Ellerman
2014-09-17 19:45 ` Nathan Fontenot
2014-09-24 20:57 ` Nathan Fontenot
2014-09-15 20:33 ` [PATCH 5/5] pseries: Implement memory hotplug remove " Nathan Fontenot
2014-09-17 7:07 ` [5/5] " Michael Ellerman
2014-09-17 19:58 ` Nathan Fontenot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54174CB7.2080704@linux.vnet.ibm.com \
--to=nfont@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).