From: Bob Cochran <ppc@mindchasers.com>
To: Emil Medve <Emilian.Medve@Freescale.com>,
linuxppc-dev@lists.ozlabs.org,
"Igal.Liberman" <igal.liberman@freescale.com>
Subject: Re: [RFC 00/10] Freescale DPAA B/QMan drivers
Date: Fri, 20 Feb 2015 09:43:05 -0500 [thread overview]
Message-ID: <54E747F9.4000001@mindchasers.com> (raw)
In-Reply-To: <54D391B2.9090909@Freescale.com>
On 02/05/2015 10:52 AM, Emil Medve wrote:
> Hello Bob,
>
>
> On 02/05/2015 09:48 AM, Bob Cochran wrote:
>> On 02/04/2015 09:48 AM, Emil Medve wrote:
>>>
>>> Hello,
>>>
>>>
>>> This is the first attempt to publish the Freescale DPAA B/QMan
>>> drivers. They are
>>> not to be applied yet. At this stage, this is more or less the
>>> drivers from the
>>> Freescale PowerPC SDK roughly squashed and split in a sequence of
>>> component
>>> patches. They still needs some work and cleanup before we expect to
>>> have them
>>> applied, but we appreciate early feedback
>>
>>
>> Hi Emil,
>>
>> I had thought to try to apply these patches and build it, but I won't
>> get very far using it without FMAN (on my t1040). I searched through
>> the mail archives and didn't find FMAN patches other than for the device
>> tree. I also don't see it in the mainline tree.
>>
>> If FMAN patches have already been submitted, please point me to it.
>>
>> If not, then please let me know when we will see code to support FMAN.
>
> Let me inquire with the FMan guy here. I'll get back to you on this,
> however, don't hold your breath. There might be some weeks before the
> FMan driver will hit the e-mail lists
Hi Emil,
Were you able to obtain information on when we'll see the FMAN driver
patches submitted? I would like to be able to work with FSL DPAA on
mainline.
Thanks,
Bob
>
>> Also, is it your intention for the same QMAN/BMAN drivers to be used
>> with both FMAN and the LS AIOP?
>
> These drivers (with some upcoming updates) are expected to be use on all
> QorIQ and LS1 devices. The programming model for LS2 (which includes the
> AIOP and friends) seems to have a different programming model and these
> drivers will not be usable there
>
>
> Cheers,
>
>
>> Thank you,
>>
>> Bob
>>
>>
>>
>>
>>
>>>
>>>
>>> Cheers,
>>>
>>>
>>> Geoff Thorpe (8):
>>> fsl_bman: Add drivers for the Freescale DPAA BMan
>>> fsl_qman: Add drivers for the Freescale DPAA QMan
>>> powerpc/mpc85xx: Add platform support for the Freescale DPAA BMan
>>> powerpc/mpc85xx: Add platform support for the Freescale DPAA QMan
>>> fsl_bman: Add self-tester
>>> fsl_qman: Add self-tester
>>> fsl_bman: Add debugfs support
>>> fsl_qman: Add debugfs support
>>>
>>> Hai-Ying Wang (2):
>>> fsl_bman: Add HOTPLUG_CPU support
>>> fsl_qman: Add HOTPLUG_CPU support
>>>
>>> arch/powerpc/Kconfig | 33 +-
>>> arch/powerpc/platforms/85xx/Kconfig | 11 +-
>>> arch/powerpc/platforms/85xx/corenet_generic.c | 26 +-
>>> arch/powerpc/platforms/85xx/p1023_rdb.c | 26 +-
>>> drivers/staging/Kconfig | 4 +-
>>> drivers/staging/Makefile | 1 +
>>> drivers/staging/fsl_qbman/Kconfig | 188 ++
>>> drivers/staging/fsl_qbman/Makefile | 23 +
>>> drivers/staging/fsl_qbman/bman_config.c | 611 ++++++
>>> drivers/staging/fsl_qbman/bman_debugfs.c | 119 +
>>> drivers/staging/fsl_qbman/bman_driver.c | 373 ++++
>>> drivers/staging/fsl_qbman/bman_high.c | 1055 +++++++++
>>> drivers/staging/fsl_qbman/bman_low.h | 524 +++++
>>> drivers/staging/fsl_qbman/bman_private.h | 149 ++
>>> drivers/staging/fsl_qbman/bman_test.c | 56 +
>>> drivers/staging/fsl_qbman/bman_test.h | 44 +
>>> drivers/staging/fsl_qbman/bman_test_high.c | 181 ++
>>> drivers/staging/fsl_qbman/bman_test_thresh.c | 196 ++
>>> drivers/staging/fsl_qbman/dpa_alloc.c | 573 +++++
>>> drivers/staging/fsl_qbman/dpa_sys.h | 294 +++
>>> drivers/staging/fsl_qbman/qbman_driver.c | 85 +
>>> drivers/staging/fsl_qbman/qman_config.c | 991 +++++++++
>>> drivers/staging/fsl_qbman/qman_debugfs.c | 1326 ++++++++++++
>>> drivers/staging/fsl_qbman/qman_driver.c | 548 +++++
>>> drivers/staging/fsl_qbman/qman_high.c | 2624
>>> +++++++++++++++++++++++
>>> drivers/staging/fsl_qbman/qman_low.h | 1302 +++++++++++
>>> drivers/staging/fsl_qbman/qman_private.h | 283 +++
>>> drivers/staging/fsl_qbman/qman_test.c | 57 +
>>> drivers/staging/fsl_qbman/qman_test.h | 43 +
>>> drivers/staging/fsl_qbman/qman_test_high.c | 213 ++
>>> drivers/staging/fsl_qbman/qman_test_hotpotato.c | 497 +++++
>>> drivers/staging/fsl_qbman/qman_utility.c | 129 ++
>>> include/linux/fsl_bman.h | 517 +++++
>>> include/linux/fsl_qman.h | 1955
>>> +++++++++++++++++
>>> 34 files changed, 15032 insertions(+), 25 deletions(-)
>>> create mode 100644 drivers/staging/fsl_qbman/Kconfig
>>> create mode 100644 drivers/staging/fsl_qbman/Makefile
>>> create mode 100644 drivers/staging/fsl_qbman/bman_config.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_debugfs.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_driver.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_high.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_low.h
>>> create mode 100644 drivers/staging/fsl_qbman/bman_private.h
>>> create mode 100644 drivers/staging/fsl_qbman/bman_test.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_test.h
>>> create mode 100644 drivers/staging/fsl_qbman/bman_test_high.c
>>> create mode 100644 drivers/staging/fsl_qbman/bman_test_thresh.c
>>> create mode 100644 drivers/staging/fsl_qbman/dpa_alloc.c
>>> create mode 100644 drivers/staging/fsl_qbman/dpa_sys.h
>>> create mode 100644 drivers/staging/fsl_qbman/qbman_driver.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_config.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_debugfs.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_driver.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_high.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_low.h
>>> create mode 100644 drivers/staging/fsl_qbman/qman_private.h
>>> create mode 100644 drivers/staging/fsl_qbman/qman_test.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_test.h
>>> create mode 100644 drivers/staging/fsl_qbman/qman_test_high.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_test_hotpotato.c
>>> create mode 100644 drivers/staging/fsl_qbman/qman_utility.c
>>> create mode 100644 include/linux/fsl_bman.h
>>> create mode 100644 include/linux/fsl_qman.h
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
next prev parent reply other threads:[~2015-02-20 14:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-04 14:48 [RFC 00/10] Freescale DPAA B/QMan drivers Emil Medve
2015-02-04 14:48 ` [RFC 01/10] fsl_bman: Add drivers for the Freescale DPAA BMan Emil Medve
2015-02-04 14:48 ` [RFC 02/10] fsl_qman: Add drivers for the Freescale DPAA QMan Emil Medve
2015-02-04 14:48 ` [RFC 03/10] powerpc/mpc85xx: Add platform support for the Freescale DPAA BMan Emil Medve
2015-02-04 14:48 ` [RFC 04/10] powerpc/mpc85xx: Add platform support for the Freescale DPAA QMan Emil Medve
2015-02-04 14:48 ` [RFC 05/10] fsl_bman: Add self-tester Emil Medve
2015-02-04 14:48 ` [RFC 06/10] fsl_qman: " Emil Medve
2015-02-04 14:48 ` [RFC 07/10] fsl_bman: Add debugfs support Emil Medve
2015-02-04 14:48 ` [RFC 08/10] fsl_qman: " Emil Medve
2015-02-04 14:48 ` [RFC 09/10] fsl_bman: Add HOTPLUG_CPU support Emil Medve
2015-02-04 14:48 ` [RFC 10/10] fsl_qman: " Emil Medve
2015-02-04 18:40 ` [RFC 00/10] Freescale DPAA B/QMan drivers Greg KH
2015-02-04 22:16 ` Emil Medve
2015-02-05 2:29 ` Greg KH
2015-02-05 8:41 ` Dan Carpenter
2015-02-05 14:55 ` Emil Medve
2015-02-05 15:48 ` Bob Cochran
2015-02-05 15:52 ` Emil Medve
2015-02-20 14:43 ` Bob Cochran [this message]
2015-02-20 14:57 ` Joakim Tjernlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E747F9.4000001@mindchasers.com \
--to=ppc@mindchasers.com \
--cc=Emilian.Medve@Freescale.com \
--cc=igal.liberman@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).