Re: Problems with Kernels 3.17-rc1 and onwards on Acube Sam460 AMCC 460ex board

[Julian Margetson <runaway@candw.ms>]

[-- Attachment #1: Type: text/plain, Size: 5592 bytes --]

On 2/18/2015 11:25 PM, Julian Margetson wrote:
> On 2/18/2015 10:56 PM, Michael Ellerman wrote:
>> On Wed, 2015-02-18 at 21:36 -0400, Julian Margetson wrote:
>>> On 2/18/2015 8:13 PM, Michael Ellerman wrote:
>>>
>>>> On Wed, 2015-02-18 at 15:45 -0400, Julian Margetson wrote:
>>>>> On 2/15/2015 8:18 PM, Michael Ellerman wrote:
>>>>>
>>>>>> On Sun, 2015-02-15 at 08:16 -0400, Julian Margetson wrote:
>>>>>>> Hi
>>>>>>>
>>>>>>> I am unable to get any kernel beyond  the 3.16 branch working on an
>>>>>>> Acube Sam460ex
>>>>>>>   AMCC 460ex based motherboard. Kernel  up 3.16.7-ckt6 working.
>>>>>> Does reverting b0345bbc6d09 change anything?
>>>>>>
>>>>>>> [    6.364350] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>>>>>>> [    6.453794] snd_hda_intel 0001:81:00.1: ppc4xx_setup_msi_irqs: fail mapping irq
>>>>>>> [    6.487530] Unable to handle kernel paging request for data at address 0x0fa06c7c
>>>>>>> [    6.495055] Faulting instruction address: 0xc032202c
>>>>>>> [    6.500033] Vector: 300 (Data Access) at [efa31cf0]
>>>>>>> [    6.504922]     pc: c032202c: __reg_op+0xe8/0x100
>>>>>>> [    6.509697]     lr: c0014f88: msi_bitmap_free_hwirqs+0x50/0x94
>>>>>>> [    6.515600]     sp: efa31da0
>>>>>>> [    6.518491]    msr: 21000
>>>>>>> [    6.521112]    dar: fa06c7c
>>>>>>> [    6.523915]  dsisr: 0
>>>>>>> [    6.526190]   current = 0xef8bab00
>>>>>>> [    6.529603]     pid   = 115, comm = kworker/0:1
>>>>>>> [    6.534163] enter ? for help
>>>>>>> [    6.537054] [link register   ] c0014f88 msi_bitmap_free_hwirqs+0x50/0x94
>>>>>>> [    6.543811] [efa31da0] c0014f78 msi_bitmap_free_hwirqs+0x40/0x94 (unreliable)
>>>>>>> [    6.551001] [efa31dc0] c001aee8 ppc4xx_setup_msi_irqs+0xac/0xf4
>>>>>>> [    6.556973] [efa31e00] c03503a4 pci_enable_msi_range+0x1e0/0x280
>>>>>>> [    6.563032] [efa31e40] f92c2f74 azx_probe_work+0xe0/0x57c [snd_hda_intel]
>>>>>>> [    6.569906] [efa31e80] c0036344 process_one_work+0x1e8/0x2f0
>>>>>>> [    6.575627] [efa31eb0] c003677c worker_thread+0x2f4/0x438
>>>>>>> [    6.581079] [efa31ef0] c003a3e4 kthread+0xc8/0xcc
>>>>>>> [    6.585844] [efa31f40] c000aec4 ret_from_kernel_thread+0x5c/0x64
>>>>>>> [    6.591910] mon>  <no input ...>
>>>>> Managed to do a third git bisect  with the following results .
>>>> Great work.
>>>>
>>>>> git bisect bad
>>>>> 9279d3286e10736766edcaf815ae10e00856e448 is the first bad commit
>>>>> commit 9279d3286e10736766edcaf815ae10e00856e448
>>>>> Author: Rasmus Villemoes<linux@rasmusvillemoes.dk>
>>>>> Date:   Wed Aug 6 16:10:16 2014 -0700
>>>>>
>>>>>      lib: bitmap: change parameter of bitmap_*_region to unsigned
>>>> So the bug is in the 4xx MSI code, and has always been there, in fact I don't
>>>> see how that code has *ever* worked. The commit you bisected to just caused the
>>>> existing bug to cause an oops.
>>>>
>>>> Can you try this?
>>>>
>>>> diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> index 6e2e6aa378bb..effb5b878a78 100644
>>>> --- a/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> +++ b/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> @@ -95,11 +95,9 @@ static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>>>   
>>>>   	list_for_each_entry(entry, &dev->msi_list, list) {
>>>>   		int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
>>>> -		if (int_no >= 0)
>>>> -			break;
>>>>   		if (int_no < 0) {
>>>> -			pr_debug("%s: fail allocating msi interrupt\n",
>>>> -					__func__);
>>>> +			pr_warn("%s: fail allocating msi interrupt\n", __func__);
>>>> +			return -ENOSPC;
>>>>   		}
>>>>   		virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
>>>>   		if (virq == NO_IRQ) {
>>>>
>>> Thanks.
>>> This works with 3.17-rc1. Will try with the 3.18 Branch .
>> OK great.
>>
>>> Any ideas why drm is not  working ? (It never worked) .
>> No sorry. You might have more luck if you post a new thread to the dri list.
>>
>>> [    5.809802] Linux agpgart interface v0.103
>>> [    6.137893] [drm] Initialized drm 1.1.0 20060810
>>> [    6.439872] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>>> [    6.508544] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
>> I'm curious why it's failing to allocate MSIs. Possibly it's just run out.
>>
>> Can you post the output of 'cat /proc/interrupts'?
>>
>> cheers
>>
>>
>>
> cat /proc/interrupts
>             CPU0
>   18:          0       UIC  11 Edge      L2C
>   19:          0       UIC  12 Level     snd_ice1724
>   20:          1       UIC  16 Level
>   21:        306       UIC  17 Level     snd_hda_intel
>   22:      12212       UIC   0 Level     0002:00:04.0
>   25:        619       UIC   6 Level     MAL TX EOB
>   26:        937       UIC   7 Level     MAL RX EOB
>   27:          0       UIC   3 Level     MAL SERR
>   28:          0       UIC   4 Level     MAL TX DE
>   31:          0       UIC   5 Level     MAL RX DE
>   32:       6607       UIC  29 Level     ehci_hcd:usb1
>   33:          1       UIC  30 Level     ohci_hcd:usb2
>   38:         19       UIC   2 Level     IBM IIC
>   39:          0       UIC   3 Level     IBM IIC
>   40:          0       UIC  16 Level     EMAC
>   44:          0       UIC   0 Edge      aerdrv
>   45:          0       UIC   2 Edge      aerdrv
> LOC:     117318   Local timer interrupts for timer event device
> LOC:         53   Local timer interrupts for others
> SPU:          0   Spurious interrupts
> PMI:          0   Performance monitoring interrupts
> MCE:          0   Machine check exceptions
  re PPC4XX PCI(E) MSI support.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-November/087273.html

[-- Attachment #2: Type: text/html, Size: 7407 bytes --]